Abstract
A transparent perhydropolysilazane-derived-SiOx coated cellulose film with high gas barrier properties was fabricated via a facile solution dip-coating followed by UV curing method. The conversion of perhydropolysilazane to SiOx was proved by ATR-FTIR, XPS and TOF–SIMS characterizations. AFM and SEM images revealed the smoothness of the coating and good adhesion between the cellulose substrate and the coating. The thickness of the SiOx coating (50–450 nm) can be tuned by changing the concentration of the perhydropolysilazane precursor solution. The cellulose film (35 µm in thickness) with 450 nm thick SiOx coating exhibits low oxygen transmission rate (OTR) value of 0.82 cm3/m2·day and water vapor transmission rate (WVTR) value of 1.28 g/m2·day. The excellent oxygen and water vapor barrier properties, ultrahigh transparency and complete biodegradability of the SiOx coated cellulose film endow it competitive potential for packaging applications.
Graphical abstract
A transparent perhydropolysilazane-derived-SiOx layer is tightly coated on a cellulose film via a facile solution dip-coating followed by UV curing method. The sandwich structured cellulose-SiOx films show excellent oxygen and water vapor barrier properties as well as ultrahigh transparency and complete biodegradability, which has a great potential for food, medicine and other packaging applications.
Similar content being viewed by others
References
Bauer F, Decker U, Dierdorf A, Ernst H, Heller R, Liebe H, Mehnert R (2005) Preparation of moisture curable polysilazane coatings: part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy. Prog Org Coat 53(3):183–190. https://doi.org/10.1016/j.porgcoat.2005.02.006
Blankenburg L, Schrödner M (2015) Perhydropolysilazane derived silica for flexible transparent barrier foils using a reel-to-reel wet coating technique: single-and multilayer structures. Surf Coat Technol 275:193–206. https://doi.org/10.1016/j.surfcoat.2015.05.019
Ding F, Liu J, Zeng S, Xia Y, Wells KM, Nieh MP, Sun L (2017) Biomimetic nanocoatings with exceptional mechanical, barrier, and flame-retardant properties from large-scale one-step coassembly. Sci Adv 3(7):e1701212. https://doi.org/10.1126/sciadv.1701212
Fink HP, Weigel P, Purz HJ, Ganster J (2001) Structure formation of regenerated cellulose materials from NMMO-solutions. Prog Polym Sci 26(9):1473–1524. https://doi.org/10.1016/S0079-6700(01)00025-9
Funayama O, Kato T, Tashiro Y, Isoda T (1993) Synthesis of a polyborosilazane and its conversion into inorganic compounds. J Am Ceram Soc 76(3):717–723. https://doi.org/10.1111/j.1151-2916.1993.tb03665.x
Ge C, Lansing B, Lewis CL (2021) Thermoplastic starch and poly (vinyl alcohol) blends centered barrier film for food packaging applications. Food Packaging Shelf 27:100610. https://doi.org/10.1016/j.fpsl.2020.100610
Gross RA, Kalra B (2002) Biodegradable polymers for the environment. Science 297(5582):803–807. https://doi.org/10.1126/science.297.5582.803
Ito H, Sakata M, Hongo C, Matsumoto T, Nishino T (2018) Cellulose nanofiber nanocomposites with aligned silver nanoparticles. Nanocomposites 4(4):167–177. https://doi.org/10.1080/20550324.2018.1556912
Iwamoto Y, Sato K, Kato T, Inada T, Kubo Y (2005) A hydrogen-permselective amorphous silica membrane derived from polysilazane. J Eur Ceram Soc 25(2–3):257–264. https://doi.org/10.1016/j.jeurceramsoc.2004.08.007
Klemm D, Heublein B, Fink HP, Bohn A (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Edit 44(22):3358–3393. https://doi.org/10.1002/anie.200460587
Kobayashi Y, Yokota H, Fuchita Y, Takahashi A, Sugahara Y (2013) Characterization of gas barrier silica coatings prepared from perhydropolysilazane films by vacuum ultraviolet irradiation. J Ceram Soc Jpn 121(1410):215–218. https://doi.org/10.2109/jcersj2.121.215
Kozuka H, Fujita M, Tamoto S (2008) Polysilazane as the source of silica: the formation of dense silica coatings at room temperature and the new route to organic-inorganic hybrids. J Gol-gel Sci Techn 48(1):148–155. https://doi.org/10.1007/s10971-008-1793-1
Kubo T, Tadaoka E, Kozuka H (2004) Formation of silica coating films from spin-on polysilazane at room temperature and their stability in hot water. J Mater Res 19(2):635–642. https://doi.org/10.1557/jmr.2004a.19.2.635
Kubo T, Tadaoka E, Kozuka H (2004b) Preparation of hot water-resistant silica thin films from polysilazane solution at room temperature. J Sol-Gel Sci Techn 31(1):257–261. https://doi.org/10.1023/B:JSST.0000047999.87439.c2
Lange J, Wyser Y (2003) Recent innovations in barrier technologies for plastic packaging-a review. Packag Techno Sci: Int J 16(4):149–158. https://doi.org/10.1002/pts.621
Laohakunjit N, Noomhorm A (2004) Effect of plasticizers on mechanical and barrier properties of rice starch film. Starch-Stärke 56(8):348–356. https://doi.org/10.1002/star.200300249
Li GF, Luo WH, Xiao M, Wang SJ, Meng YZ (2016) Biodegradable poly (propylene carbonate)/layered double hydroxide composite films with enhanced gas barrier and mechanical properties. Chin J Polym Sci 34(1):13–22. https://doi.org/10.1007/s10118-016-1720-9
Liu Y, Xu S, Jing M, Wei Y, Deng H, Fu Q (2019) Preparation of high-performance cellulose composite membranes from LiOH/urea solvent system. Nanocomposites 5(2):49–60. https://doi.org/10.1080/20550324.2019.1619962
Miller KS, Krochta JM (1997) Oxygen and aroma barrier properties of edible films: a review. Trends Food Sci Tech 8(7):228–237. https://doi.org/10.1016/S0924-2244(97)01051-0
Morlier A, Cros S, Garandet JP, Alberola N (2013) Gas barrier properties of solution processed composite multilayer structures for organic solar cells encapsulation. Sol Energ Mat Sol C 115:93–99. https://doi.org/10.1016/j.tsf.2013.10.140
Morlier A, Cros S, Garandet JP, Alberola N (2014) Structural properties of ultraviolet cured polysilazane gas barrier layers on polymer substrates. Thin Solid Films 550:85–89. https://doi.org/10.1016/j.tsf.2013.10.140
Naganuma Y, Tanaka S, Kato C, Shindo T (2004) Formation of silica coatings from perhydropolysilazane using vacuum ultraviolet excimer lamp. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi (j Ceram Soc Jpn) 112(11):599–603
Nakajima K, Uchiyama H, Kitano T, Kozuka H (2013) Conversion of solution-derived perhydropolysilazane thin films into silica in basic humid atmosphere at room temperature. J Am Ceram Soc 96(9):2806–2816. https://doi.org/10.1111/jace.12513
Ohishi T (2003) Gas barrier characteristics of a polysilazane film formed on an ITO-coated PET substrate. J Non-Cryst Solids 330(1–3):248–251. https://doi.org/10.1016/j.jnoncrysol.2003.09.022
Ohishi T, Sone S, Yanagida K (2014) Preparation and gas barrier characteristics of polysilazane-derived silica thin films using ultraviolet irradiation. Mat Sci Appl. https://doi.org/10.4236/msa.2014.53015
Plackett D (2012) PHA/clay nano-biocomposites. Environmental silicate nano-biocomposites. Springer, London
Prager L, Dierdorf A, Liebe H, Naumov S, Stojanovic S, Heller R, Buchmeiser M et al (2007) Conversion of perhydropolysilazane into a SiOx network triggered by vacuum ultraviolet irradiation: access to flexible, transparent barrier coatings. Chem-Eur J 13(30):8522. https://doi.org/10.1002/chem.200700351
Qi GJ, Zhang CR, Hu HF, Cao F, Wang SQ, Cao YB, Jiang YG (2005) Preparation of three-dimensional silica fiber reinforced silicon nitride composites using perhydropolysilazane as precursor. Mater Lett 59(26):3256–3258. https://doi.org/10.1016/j.pmatsci.2005.05.002
Ray SS, Bousmina M (2005) Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 50(8):962–1079
Rhim JW, Park HM, Ha CS (2013) Bio-nanocomposites for food packaging applications. Prog Polym Sci 38(10–11):1629–1652. https://doi.org/10.1016/j.pmatsci.2005.05.002
Schwab ST, Graef RC, Blanchard CR, Dec SF, Maciel GG (1998) The pyrolytic conversion of perhydropolysilazane into silicon nitride. Ceram Int 24(6):411–414. https://doi.org/10.1016/S0272-8842(97)00010-2
Venkatesan R, Rajeswari N, Tamilselvi A (2018) Antimicrobial, mechanical, barrier, and thermal properties of bio-based poly (butylene adipate-co-terephthalate)(PBAT)/Ag2O nanocomposite films for packaging application. Polym Advan Technol 29(1):61–68. https://doi.org/10.1002/pat.4089
Wong WS, Salleo A (2009) Flexible electronics: materials and applications. Springer Science & Business Media, Berlin
Xu L, Teng J, Li L, Huang HD, Xu JZ, Li Y, Li ZM et al (2019) Hydrophobic graphene oxide as a promising barrier of water vapor for regenerated cellulose nanocomposite films. ACS Omega 4(1):509–517. https://doi.org/10.1021/acsomega.8b02866
Yu L, Dean K, Li L (2006) Polymer blends and composites from renewable resources. Prog Polym Sci 31(6):576–602. https://doi.org/10.1016/j.progpolymsci.2006.03.002
Zhai LM, Li GF, Xu Y, Xiao M, Wang SJ, Meng YZ (2015) Poly (propylene carbonate)/aluminum flake composite films with enhanced gas barrier properties. J Appl Polym Sci. https://doi.org/10.1002/app.41663
Zheng M, Tajvidi M, Tayeb AH, Stark NM (2019) Effects of bentonite on physical, mechanical and barrier properties of cellulose nanofibril hybrid films for packaging applications. CELS 26(9):5363–5379. https://doi.org/10.1007/s10570-019-02473-2
Acknowledgments
This work was supported by the National Natural Science Foundation of China (Grant No. 22179149); and the Fundamental Research Funds for the Central Universities (171gjc37).
Funding
National Natural Science Foundation of China (Grant No. 22179149); Special Project on the Integration of Industry, Education and Research of Guangdong Province (Grant No. 2012B091100293).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare no competing financial interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yue, S., Wang, S., Han, D. et al. Perhydropolysilazane-derived-SiOx coated cellulose: a transparent biodegradable material with high gas barrier property. Cellulose 29, 8293–8303 (2022). https://doi.org/10.1007/s10570-022-04746-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-022-04746-9