Abstract
Basic lithium phosphate and stoichiometric lithium phosphate were prepared and their catalytic properties were compared. Using basic lithium phosphate as the isomerization catalyst for propylene oxide led to higher selectivity in allyl alcohol and better propylene oxide conversion than stoichiometric lithium phosphate. The fresh and deactivated basic lithium phosphates were also characterized by X-ray diffraction. Results showed that new phases appeared in the deactivated catalyst. An isomerization mechanism for propylene oxide catalyzed by basic lithium phosphate was proposed. Results of temperature programmed desorption of CO2 showed that the surface basicity of the catalysts had a great effect on their catalytic properties and that the catalyst with pH = 12 had two basic centers and its catalytic properties were the best.
Graphical Abstract
Basic lithium phosphate had better catalytic properties for isomerization of propylene oxide to allyl alcohol than stoichiometric lithium phosphate. Results of CO2-TPD showed that surface basicity of the catalysts had much effect on catalytic properties. And a mechanism was proposed.
Similar content being viewed by others
References
Iwasaki S (1999) Preparation of allylic alcohols by isomerization of epoxides, JP1149709, 23 Feb 1999
Mahmoud KF (1996) Improved catalyst for isomerization of propylene oxide, JP8117605, 14 May 1996
Fási A, Gomory Á, Pálinkó I et al (2001) Isomerization and dimerization reactions of methyloxirane over various types of zeolite and zeotype. J Catal 200:340–344
Shum WP (2004) Preparation of lithium phosphate, US6803491B1 12 Oct 2004
Shum WP (2002) Hydroformylation process, US6426437B1, 30 July 2002
Okamoto Y, Imanaka T, Teranishi S (1973) The isomerization of propylene oxide on metal oxides and silica-magnesia catalysts. Bull Chem Soc Jpn 46:4–8
Ayame A, Sawada G, Sato H et al (1989) Characterization of chlorine-treated alumina surfaces. Appl Catal 48:25–35
Imanaka T, Okamoto Y, Teranishi S (1972) The isomerization of propylene oxide on zeolite catalysts. Bull Chem Soc Jpn 45:3251–3254
Ayame A, Abe M, Kitagawa T (1990) Acidity and basicity of and propylene oxide isomerization on high temperature-calcined alumina. J Japan Petrol Inst 33:75–83
Yadav GD, Satoskar DV (1997) Isomerization of 1,2-Epoxyalkanes: effect of different solid acids on product distribution mechanism and kinetics. J Chem Tech Biotechnol 69:438–450
Shinohara Y, Mitamura T, Nakajima T, Suzuki S (1998) Quantum chemical studies on isomerization mechanisms of propylene oxide and on catalytic properties of metal oxides. Nippon Kagaku Kaishi (10):643–649
Morgan KM, Joseph JG (1996) Mechanism of the base-induced isomerization of cyclopentene and cyclohexene oxide. J Org Chem 61:820–821
Rojas RM, De Vidales Martin JL, Delgado A et al (1993) Microstructural and thermal characterization of basic and stoichiometric lithium phosphates, in relation with their catalytic activity, J. Solid State Chem 106:237–252
Bobylev BN, Farberov MI, Mel’nik LV (1974) Isomerization of propylene oxide to allyl alcohol. Neftekhimiya 14:106–112
Tanabe K, Misono M (1992) New solid acids and bases and their catalytic effects (trans: Zheng LB, Wang GW, Zhang Y Zh). Chem Ind Press, Beijing
Acknowledgments
This work is supported by the Natural Science Foundation of Jiangsu Province and Basic Research Program of Jin Ling Petrochemical Corporation.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ma, W., Si, W., Wu, W. et al. Structures and Catalytic Properties of Lithium Phosphates. Catal Lett 141, 1032–1036 (2011). https://doi.org/10.1007/s10562-011-0597-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10562-011-0597-z