Skip to main content
SpringerLink
Log in

A review on fault detection and diagnosis techniques: basics and beyond

  • Published:
Artificial Intelligence Review Aims and scope Submit manuscript

Abstract

Safety and reliability are absolutely important for modern sophisticated systems and technologies. Therefore, malfunction monitoring capabilities are instilled in the system for detection of the incipient faults and anticipation of their impact on the future behavior of the system using fault diagnosis techniques. In particular, state-of-the-art applications rely on the quick and efficient treatment of malfunctions within the equipment/system, resulting in increased production and reduced downtimes. This paper presents developments within Fault Detection and Diagnosis (FDD) methods and reviews of research work in this area. The review presents both traditional model-based and relatively new signal processing-based FDD approaches, with a special consideration paid to artificial intelligence-based FDD methods. Typical steps involved in the design and development of automatic FDD system, including system knowledge representation, data-acquisition and signal processing, fault classification, and maintenance related decision actions, are systematically presented to outline the present status of FDD. Future research trends, challenges and prospective solutions are also highlighted.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1

Similar content being viewed by others

References

  • Abad MRAA, Moosavian A, Khazaee M (2016) Wavelet transform and least square support vector machine for mechanical fault detection of an alternator using vibration signal. J Low Freq Noise Vib Active Control 35(1):52–63

    Google Scholar 

  • Abaei G, Selamat A (2014) A survey on software fault detection based on different prediction approaches. Vietnam J Comput Sci 1(2):79–95

    Google Scholar 

  • Abbasi AR, Mahmoudi MR, Avazzadeh Z (2018) Diagnosis and clustering of power transformer winding fault types by cross-correlation and clustering analysis of FRA results. IET Gener Transm Distrib 12(19):4301–4309

    Google Scholar 

  • Abid A, Khan MT, de Silva CW (2018) Layered and real-valued negative selection algorithm for fault detection. IEEE Syst J 12(3):2960–2969

    Google Scholar 

  • Abid A, Khan MT, Lang H, Silva CWD (2019) Adaptive system identification and severity index-based fault diagnosis in motors. IEEE/ASME Trans Mechatron 24(4):1628–1639

    Google Scholar 

  • Abid A, Khan MT, Khan MS (2020b) Multidomain features-based GA optimized fault detection. IEEE Trans Syst Man Cybern Syst 50(1):348–359

    Google Scholar 

  • Abid A, Khan MT, Haq IU, Anwar S, Iqbal J (2020a) An improved negative selection algorithm-based fault detection method. IETE J Res, pp 1–12

  • Abid A, Khan MT, Silva CWD (2015) Fault detection in mobile robots using sensor fusion. In: 10th international conference on computer science and education (ICCSE 2015). Cambridge University, UK, pp 8–13, July 22–24, 2015

  • Abid A, Khan MT (2017) Multi-sensor, multi-level data fusion and behavioral analysis based fault detection and isolation in mobile robots. In: IEEE 8th annual information technology. Electronics and mobile communication conference (IEMCON). Vancouver, Canada, pp 40–45

  • Abid A, Khan MT, Ullah A, Alam M, Sohail M (2017) Real time health monitoring of industrial machine using multiclass support vector machine. In: 2nd International conference on control and robotics engineering, vol 2, pp 77–81

  • Ahmed HOA, Nandi AK (2019) Three-stage hybrid fault diagnosis for rollin bearings with compressively sampled data and subspace learning techniques. IEEE Trans Ind Electron 66(7):5516–5524

    Google Scholar 

  • Ballal MS, Khan ZJ, Suryawanshi HM, Sonolikar RL (2007) Adaptive neural fuzzy inference system for the detection of inter-turn insulation and bearing wear faults in induction motor. IEEE Trans Ind Electron 54(1):250–258

    Google Scholar 

  • Ben Hmida F, Khémiri K, Ragot J, Gossa M (2012) Three-stage Kalman filter for state and fault estimation of linear stochastic systems with unknown inputs. J Franklin Inst 349(7):2369–2388

    MathSciNet  MATH  Google Scholar 

  • Benbouzid MEH, Vieira M, Theys C (1999) Induction motors’ faults detection and localization using stator current advanced signal processing techniques. IEEE Trans Power Electron 14(1):14–22

    Google Scholar 

  • Benmoussa S, Djeziri MA (2017) Remaining useful life estimation without needing for prior knowledge of the degradation features. IET Sci Meas Technol 11(8):1071–1078

    Google Scholar 

  • Benmoussa S, Bouamama BO, Merzouki R (2014) Bond graph approach for plant fault detection and isolation: application to iIntelligent autonomous vehicle. IEEE Trans Autom Sci Eng 11(2):585–593

    Google Scholar 

  • Bennacer L, Amirat Y, Chibani A, Mellouk A, Ciavaglia L (2015) Self-diagnosis technique for virtual private networks combining bayesian networks and case-based reasoning. IEEE Trans Autom Sci Eng 12(1):354–366

    Google Scholar 

  • Bharathi A, Natarajan AM (2010) Cancer classification of bioinformatics data using ANOVA. Int J Comput Theory Engi 2(3):369–373

    Google Scholar 

  • Bighamian R, Mirdamad HR, Hahn J-O (2015) Damage identification in collocated structural systems using structural Markov parameters. J Dyn Syst Meas Control 137(4):041001–041009

    Google Scholar 

  • Bin J (2006) Model-based fault tolerant control for hybrid dynamic systems with sensor faults. Acta Autom Sin 32(5):680–685

    MathSciNet  Google Scholar 

  • Blödt M, Chabert M, Regnier J, Faucher J (2006) Mechanical load fault detection in induction motors by stator current time-frequency analysis. IEEE Trans Ind Appl 42(6):1454–1463

    Google Scholar 

  • Bolchini C, Cassano L, Garza P, Quintarelli E, Salice F (2015) An expert CAD flow for incremental functional diagnosis of complex electronic boards. IEEE Trans Comput Aided Des Integr Circuits Syst 34(5):835–848

    Google Scholar 

  • Boudiaf A, Moussaoui A, Dahane A (2016) A comparative study of various methods of bearing faults diagnosis using the case western reserve university data. J Fail Anal Prev 16(2):271–284

    Google Scholar 

  • Boudinar AH, Benouzza N, Bendiabdellah A, Khodja MEA (2016) Induction motor bearing fault analysis using a root-MUSIC method. IEEE Trans Ind Appl 52(5):3851–3860

    Google Scholar 

  • Boulkroune B, Gálvez-carrillo M, Kinnaert M (2013) Combined signal and model-based sensor fault diagnosis for a doubly fed induction generator. IEEE Trans Control Syst Technol 21(5):1771–1783

    Google Scholar 

  • Burns DJ, Danielson C, Zhou J, Di Cairano S (2018) Reconfigurable model predictive control for multievaporator vapor compression systems. IEEE Trans Control Syst Technol 26(3):984–1000

    Google Scholar 

  • Camarena-Martinez D, Osornio-Rios R, Romero-Troncoso RJ, Garcia-Perez A (2016) Fused empirical mode decomposition and MUSIC algorithms for detecting multiple combined faults in induction motors. J Appl Res Technol 13:160–167

    Google Scholar 

  • Capisani LM, Ferrara A, Alejandra Ferreira DL, Fridman ML (2011) Manipulators fault diagnosis via higher order sliding mode observers. IEEE Trans Ind Electron 59(10):3979–3986

    Google Scholar 

  • Chehade A, Bonk S, Liu K (2017) Sensory-based failure threshold estimation for remaining useful life prediction. IEEE Trans Reliab 66(3):939–949

    Google Scholar 

  • Chen X, Yan X (2013) Fault diagnosis in chemical process based on self-organizing map integrated with fisher discriminant analysis. Chin J Chem Eng 21(4):382–387

    Google Scholar 

  • Chen W, Chen W-T, Saif M, Li M-F, Wu H (2014) Simultaneous fault isolation and estimation of lithium-ion batteries via synthesized design of Luenberger and learning observers. IEEE Trans Control Syst Technol 22(1):290–298

    Google Scholar 

  • Cheng H, Tikkala VM, Zakharov A, Myller T, Jämsä-Jounela SL (2011) Application of the enhanced dynamic causal digraph method on a three-layer board machine. IEEE Trans Control Syst Technol 19(3):644–655

    Google Scholar 

  • Cheng G, Cheng YL, Shen LH, Qiu JB, Zhang S (2013) Gear fault identification based on Hilbert–Huang transform and SOM neural network. Meas J Int Meas Confed 46(3):1137–1146

    Google Scholar 

  • Cheng F, He QP, Zhao J (2019) A novel process monitoring approach based on variational recurrent autoencoder. Comput Chem Eng 129:1–14

    Google Scholar 

  • Conatser R, Wagner J, Ganta S, Walker I (2004) Diagnosis of automotive electronic throttle control systems. Control Eng Pract 12(1):23–30

    Google Scholar 

  • Cordoneanu D, Nitu C (2018) A review of fault diagnosisin mechatronics systems. Int J Mechatron Appl Mech 3:228–235

    Google Scholar 

  • Costa Silva G, Palhares RM, Caminhas WM (2012) Immune inspired fault detection and diagnosis: a fuzzy-based approach of the negative selection algorithm and participatory clustering. Expert Syst Appl 39(16):12474–12485

    Google Scholar 

  • Dai X, Gao Z (2013) From model, signal to knowledge: a data-driven perspective of fault detection and diagnosis. IEEE Trans Ind Inf 9(4):2226–2238

    Google Scholar 

  • Dai Y, Zhao J (2011) Fault diagnosis of batch chemical processes using a dynamic time warping (DTW)-based artificial immune system. Ind Eng Chem Res 50(8):4534–4544

    Google Scholar 

  • Diao Y, Passino KM (2002) Intelligent fault-tolerant control using adaptive and learning methods. Control Eng Pract 10(8):801–817

    Google Scholar 

  • El Bouchikhi EH, Choqueuse V, Benbouzid M (2014) Induction machine faults detection using stator current parametric spectral estimation. Mech Syst Signal Process 52:447–464

    Google Scholar 

  • Fass L (2008) Imaging and cancer: a review. Mol Oncol 2:115–152

    Google Scholar 

  • Feng Z, Ma H, Zuo MJ (2016) Vibration signal models for fault diagnosis of planet bearings. J Sound Vib 370:372–393

    Google Scholar 

  • Feng Z, Zhou Z, Hu C, Yin X, Hu G, Zhao F (2017) Fault diagnosis based on belief rule base with considering attribute correlation. IEEE Access 6:2055–2067

    Google Scholar 

  • Gadsden SA, Song Y, Habibi SR (2013) Novel model-based estimators for the purposes of fault detection and diagnosis. IEEE/ASME Trans Mechatron 18(4):1237–1249

    Google Scholar 

  • Gajanayake C, Bhangu BS, Foo G, Zhang X, Tseng KJ, Vilathgamuwa MD (2013) Sensor fault detection, isolation and system reconfiguration based on extended Kalman filter for induction motor drives. IET Electr Power Appl 7(7):607–617

    Google Scholar 

  • Gao XZ, Ovaska SJ, Wang X, Chow MY (2010) Multi-level optimization of negative selection algorithm detectors with application in motor fault detection. Intell Autom Soft Comput 16(3):353–375

    Google Scholar 

  • Gelle G, Galy J, Delaunay G (2000) Blind source separation: a tool for system monitoring and fault detection?. In: IFAC Proceedings on fault detection, supervision and safety for tcchnicall’rocesses, vol 33. Elsevier, Budapest, Hungary , pp 705–710

  • Goebel K, Yan W (2008) Correcting sensor drift and intermittency faults with data fusion and automated learning. IEEE Syst J 2(2):189–197

    Google Scholar 

  • Gottumukkala P, G SR (2016) Fault Detection in Mobile Communication Networks Using Data Mining techniques with big data analytics. Int J Cybern Inf 5(4):81–89

    Google Scholar 

  • Grebenik J, Zhang Y, Bingham C, Srivastava S (2016) Roller element bearing acoustic fault detection using smartphone and consumer microphones comparing with vibration techniques. In: 17th international conference on mechatronics - mechatronika (ME), vol 1, pp 1–7

  • Guo H, Xu J, Chen YH (2015) Robust control of fault-tolerant permanent-magnet synchronous motor for aerospace application with guaranteed fault switch process. IEEE Trans Ind Electron 62(12):7309–7321

    Google Scholar 

  • Haddad RZ, Strangas EG (2016) On the accuracy of fault detection and separation in permanent magnet synchronous machines using MCSA/MVSA and LDA. IEEE Trans Energy Convers 31(3):924–934

    Google Scholar 

  • Hafaifa A, Guemana M, Daoudi A (2013) Fault detection and isolation in industrial systems based on spectral analysis diagnosis. Intell Control Autom 4(2):36–41

    Google Scholar 

  • Haque MS, Choi S, Baek J (2018) Auxiliary particle filtering-based estimation of remaining useful life of IGBT. IEEE Trans Ind Electron 65(3):2693–2703

    Google Scholar 

  • Hekmat S, Ravanmehr R (2016) Real time fault detection and isolation: a comparative study. Int J Comput Appl 134(6):8–15

    Google Scholar 

  • Henr P, Alonso B, Ferrer MA, Travieso CM (2014) Review of automatic fault diagnosis systems using audio and vibration signals. IEEE Trans Syst Man Cybern Syst 44(5):642–652

    Google Scholar 

  • Hong W, Tian-You C, Jin-Liang D, Martin B (2009) Data driven fault diagnosis and fault tolerant control: some advances and possible new directions. Acta Autom Sin 35(6):739–747

    MathSciNet  Google Scholar 

  • Huang S, Tan KK, Lee TH (2012) Fault diagnosis and fault-tolerant control in linear drives using the Kalman filter. IEEE Trans Ind Electron 59(11):4285–4292

    Google Scholar 

  • Huang H, Ouyang H, Gao H (2015) Blind source separation and dynamic fuzzy neural network for fault diagnosis in machines. In: Journal of physics: conference series 11th international conference on damage assessment of structures (DAMAS), vol 628

  • Isermann R (2005) Model-based fault-detection and diagnosis-status and applications. Ann Rev Control 29:71–85

    Google Scholar 

  • James AT, Gandhi OP, Deshmukh SG (2018) Fault diagnosis of automobile systems using fault tree based on digraph modeling. Int J Syst Assur Eng Manag 9(2):494–508

    Google Scholar 

  • Jiang X-p, Cao G-q (2015) Belt conveyor roller fault audio detection based on the wavelet neural network. In: 11th International conference on natural computation (lCNC), pp 954–958

  • Jiang W, Wei B, Xie C, Zhou D (2016) An evidential sensor fusion method in fault diagnosis. Adv Mech Eng 8(3):1–7

    Google Scholar 

  • Jiang G, Xie P, He H, Yan J (2018a) Wind turbine fault detection using a denoising autoencoder with temporal information. IEEE/ASME Trans Mechatron 23(1):89–100

    Google Scholar 

  • Jiang Y, Yin S, Kaynak O (2018b) Data-driven monitoring and safety control of industrial cyber-physical systems: basics and beyond. IEEE Access 6:47374–47384

    Google Scholar 

  • Jin S, Kim JS, Lee SK (2015) Sensitive method for detecting tooth faults in gearboxes based on wavelet denoising and empirical mode decomposition. J Mech Sci Technol 29(8):3165–3173

    Google Scholar 

  • Jung JH, Lee JJ, Kwon BH (2006) Online diagnosis of induction motors using MCSA. IEEE Trans Ind Electron 53(6):1842–1852

    Google Scholar 

  • Kemalkar AK, Bairagi VK (2017) Engine fault diagnosis using sound analysis. Int Conf Autom Control Dyn Optim Tech ICACDOT 2016:943–946

    Google Scholar 

  • Kim MH, Lee S, Lee KC (2011) A fuzzy predictive redundancy system for fault-tolerance of x-by-wire systems. Microprocess Microsyst 35(5):453–461

    Google Scholar 

  • Khireddine MS, Chafaa K, Slimane N, Boutarfa A (2014) Fault diagnosis in robotic manipulators using artificial neural networks and fuzzy logic. In: 2014 World congress on computer applications and information systems (WCCAIS), Hammamet, pp 1–6. https://doi.org/10.1109/WCCAIS.2014.6916571

  • Kong W, Luo Y, Qin Z, Qi Y, Lian X (2019) Comprehensive fault diagnosis and fault-tolerant protection of in-vehicle intelligent electric power supply network. IEEE Trans Veh Technol 68(11):10453–10464

    Google Scholar 

  • Kumar A, Kumar R (2017) Time-frequency analysis and support vector machine in automatic detection of defect from vibration signal of centrifugal pump. Meas J Int Meas Confed 108:119–133

    Google Scholar 

  • Kwak J, Lee T, Kim CO (2015) An incremental clustering-based fault detection algorithm for class-imbalanced process data. IEEE Trans Semicond Manuf 28(3):318–328

    Google Scholar 

  • Laurentys CA, Ronacher G, Palhares RM, Caminhas WM (2010) Design of an artificial immune system for fault detection: a negative selection approach. Expert Syst Appl 37(7):5507–5513

    Google Scholar 

  • Lei Y, Yang B, Jiang X, Jia F, Li N, Nandi AK (2020) Applications of machine learning to machine fault diagnosis: a review and roadmap. Mech Syst Signal Process 138:1–39

    Google Scholar 

  • Li X, Zhang W (2010) An adaptive fault-tolerant multisensor navigation strategy for automated vehicles. IEEE Trans Veh Technol 59(6):2815–2829

    MathSciNet  Google Scholar 

  • Li D, Zhou Y, Hu G, Spanos CJ (2016) Fault detection and diagnosis for building cooling system with a tree-structured learning method. Energy and Build 127:540–551

    Google Scholar 

  • Li X, Ding Q, Sun JQ (2018) Remaining useful life estimation in prognostics using deep convolution neural networks. Reliab Eng Syst Saf 172(2017):1–11

    Google Scholar 

  • Lin W-c, Du X (2018) Prognosis of power connector disconnect and high resistance faults. In: 2018 IEEE international conference on prognostics and health management (ICPHM), vol 2, pp 1–8

  • Lin WC, Ghoneim YA (2016) Model-based fault diagnosis and prognosis for electric power steering systems. In: IEEE international conference on prognostics and health management, ICPHM, pp 1–8

  • Liu Z, Wang J, Duan L, Shi T, Fu Q (2017) infrared image combined with cnn based fault diagnosis for rotating machinery. In: 2017 International conference on sensing, diagnostics, prognostics, and control (SDPC), pp 137–142

  • Lizarraga-Morales RA, Rodriguez-Donate C, Cabal-Yepez E, Lopez-Ramirez M, Ledesma-Carrillo LM, Ferrucho-Alvarez ER (2017) Novel FPGA-based methodology for early broken rotor bar detection and classification through homogeneity estimation. IEEE Trans Instrum Meas 66(7):1760–1769

    Google Scholar 

  • Loparo KA (2012) CWRU Case western reserve university bearing test data center

  • Low CB, Wang D, Member S, Arogeti S, Luo M (2010) Quantitative hybrid bond graph-based fault detection and isolation. IEEE Trans Autom Sci Eng 7(3):558–569

    Google Scholar 

  • Mahgoun H, Bekka RE, Felkaoui A (2013) Gearbox fault detection using a new denoising method based on ensemble empirical mode decomposition and Fft. In: 4th International conference on integrity, reliability and failure (IRF2013), pp 1–11

  • Malhi A, Gao RX (2004) PCA-based feature selection scheme for machine defect classification. IEEE Trans Instrum Meas 53(6):1517–1525

    Google Scholar 

  • McDonald TP, Fulton JP (2005) Automated time study of skidders using global positioning system data. Comput Electron Agric 48(1):19–37

    Google Scholar 

  • Mitra P, Member S, Murthy CA, Pal SK (2002) Unsupervised feature selection using feature similarity. IEEE Trans Pattern Anal Mach Intell 24(3):301–312

    Google Scholar 

  • Mostafa SA, Mustapha A, Hazeem AA, Khaleefah SH, Mohammed MA (2018) An agent-based inference engine for efficient and reliable automated car failure diagnosis assistance. IEEE Access 6:8322–8331

    Google Scholar 

  • Mouba J, Marchand S (2006) A source localization / separation / respatialization system based on unsupervised classification of interaural cues. In: Proceedings of the 9th international conference on digital audio effects, pp 233–238, Canada

  • Naqvi SM, Khan MS, Liu Q, Wang W, Chambers JA (2011) Multimodal blind source separation with a circular microphone array and robust beamforming. In: European signal processing conference. Barcelona, Spain, pp 1050–1054

  • Ploeg J, Semsar-Kazerooni E, Lijster G, Van De Wouw N, Nijmeijer H (2015) Graceful degradation of cooperative adaptive cruise control. IEEE Trans Intell Transp Syst 16(1):488–497

    Google Scholar 

  • Purarjomandlangrudi A, Ghapanchi AH, Esmalifalak M (2014) A data mining approach for fault diagnosis: an application of anomaly detection algorithm. Measurement 55:343–352

    Google Scholar 

  • Qiu M, Li W, Jiang F, Zhu Z (2018) Remaining useful life estimation for rolling bearing with SIOS-based indicator and particle filtering. IEEE Access 6:24521–24532

    Google Scholar 

  • Ranjan PV (2017) Machine condition monitoring using audio signature analysis. In: 4th International conference on signal processing. communications and networking (ICSCN -2017). Chennai, India, pp 1–6

  • Rodrigues LR (2018) Remaining useful life prediction for multiple-component systems based on a system-level performance indicator. IEEE/ASME Trans Mechatron 23(1):141–150

    MathSciNet  Google Scholar 

  • Romero-troncoso RJ, Saucedo-gallaga R, Cabal-yepez E, Garcia-perez A, Osornio-rios RA, Alvarez-salas R, Miranda-vidales H, Huber N (2011) FPGA-based online detection of multiple combined faults in induction motors through information entropy and fuzzy inference. IEEE Trans Ind Electron 58(11):5263–5270

    Google Scholar 

  • Sadeghkhani I, Golshan MEH, Mehrizi-Sani A, Guerrero JM, Ketabi A (2018) Transient monitoring function-based fault detection for inverter-interfaced microgrids. IEEE Trans Smart Grid 9(3):2097–2107

    Google Scholar 

  • Salehifar M, Arashloo RS, Moreno-equilaz JM, Sala V, Romeral L (2014) Fault Detection and Fault Tolerant Operation of a Five Phase PM Motor drive using adaptive model identification approach. IEEE J Emerg Sel Top Power Electron 2(2):212–223

    Google Scholar 

  • Salmasi FR, Najafabadi TA, Maralani PJ (2010) An Adaptive Flux Observer With Online Estimation of DC-Link Voltage and rotor resistance for VSI-based induction motors. IEEE Trans Power Electron 25(5):1310–1319

    Google Scholar 

  • Samantaray K, Medjaher K, Ould Bouamama B, Staroswiecki M, Dauphin-Tanguy G (2006) Diagnostic bond graphs for online fault detection and isolation. Simul Modell Pract Theory 14(3):237–262

    Google Scholar 

  • Samantaray S, Panigrahi B, Dash P (2008) High impedance fault detection in power distribution networks using time-frequency transform and probabilistic neural network. IET Gener Trans Distrib 28(2):261–270

    Google Scholar 

  • Senanayaka JSL, Khang HV, Robbersmyr KG (2019) Multiple classifier and data fusion for robust fault diagnosis of gearbox mixed faults. IEEE Trans Ind Inf 15(8):4569–4579

    Google Scholar 

  • Shah DS, Patel VN (2014) A Review of Dynamic Modeling and Fault Identifications Methods for Rolling element bearing. Procedia Technol 14:447–456

    Google Scholar 

  • Shao H, Jiang H, Zhao H, Wang F (2017a) A novel deep autoencoder feature learning method for rotating machinery fault diagnosis. Mech Syst Signal Process 95:187–204

    Google Scholar 

  • Shao H, Jiang H, Zhao H, Wang F (2017b) A novel deep autoencoder feature learning method for rotating machinery fault diagnosis. Knowl Based Syst 119:200–220

    Google Scholar 

  • Shao H, Jiang H, Zhang H, Duan W, Liang T, Wu S (2018) Rolling bearing fault feature learning using improved convolutional deep belief network with compressed sensing. Mech Syst Signal Process 100:743–765

    Google Scholar 

  • Shen Q, Jiang B, Member S, Cocquempot V (2013) Fuzzy Logic System-Based Adaptive Fault-Tolerant Control for Near-Space vehicle attitude dynamics with actuator faults. IEEE Trans Fuzzy Syst 21(2):289–300

    Google Scholar 

  • Shen C, Wang D, Liu Y, Kong F, Tse PW (2014) Recognition of rolling bearing fault patterns and sizes based on two-layer support vector regression machines. Smart Struct Syst 13(3):453–471

    Google Scholar 

  • Shu Y, Liu H, Wu Z, Yang X (2009) Modeling of software fault detection and correction processes based on the correction lag. Inform Technol J 8(5):735–742

    Google Scholar 

  • Soualhi A, Clerc G, Razik H (2013) Detection and diagnosis of faults in induction motor using an improved artificial ant clustering technique. IEEE Trans Ind Electron 60(9):4053–4062

    Google Scholar 

  • Strangas EG, Aviyente S, Zaidi SSH (2008) Time-frequency analysis for efficient fault diagnosis and failure prognosis for interior permanent-magnet AC motors. IEEE Trans Ind Electron 55(12):4191–4199

    Google Scholar 

  • Su J, Chen W-h (2019) Model-based fault diagnosis system verification using reachability analysis. IEEE Trans Syst Man Cybern Syst 49(4):742–751

    Google Scholar 

  • Tabbache B, El M, Benbouzid H, Kheloui A, Bourgeot J-M (2013) Virtual-sensor-based maximum-likelihood voting approach for fault-tolerant control of electric vehicle powertrains. IEEE Trans Veh Technol 62(3):1075–1083

    Google Scholar 

  • Tadina M, Bolte M (2011) Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up. J Sound Vib 300(17):4287–4301

    Google Scholar 

  • Thumati B, Sarangapani J (2018) A Novel Fault Diagnostics and Prediction Scheme Using a Nonlinear Observer with artificial immune system as an online approximator. IEEE Trans Control Syst Technol 26(1):377–378

    Google Scholar 

  • Tong Z, Li W, Jiang F, Zhu Z, Zhou G (2018) Bearing fault diagnosis based on spectrum image sparse representation of vibration signal. Adv Mech Eng 10(9):1687814018797788

    Google Scholar 

  • Venkatasubramanian V, Rengaswamy R, Ka SN (2003) A review of process fault detection and diagnosis part III: process history based methods. Comput Chem Eng 27:327–346

    Google Scholar 

  • Wang Y, Cheng Y (2016) An approach to fault diagnosis for gearbox based on image processing. Shock Vib 1–10:2016

    Google Scholar 

  • Wang W, Lee H (2013) An energy kurtosis demodulation technique for signal denoising and bearing fault detection. Meas Sci Technol 24(2):025601

    Google Scholar 

  • Wang G, Li T, Zhang G, Gui X, Xu D (2014) Recursive-Least-Square Adaptive Filter for Model-Based Sensorless Interior permanent-magnet synchronous motor drives. IEEE Trans Ind Electron 61(9):5115–5125

    Google Scholar 

  • Wang J, Zhang J, Qu B, Wu H, Zhou J (2017) Unified architecture of active fault detection and partial active fault-tolerant control for incipient faults. IEEE Trans Syst Man Cybern Syst 47(7):1688–1700

    Google Scholar 

  • Wang B, Wang J, Griffo A, Sen B (2018) Stator turn fault detection by second harmonic in instantaneous power for a triple-redundant fault-tolerant PM drive. IEEE Trans Ind Electron 65(9):7279–7289

    Google Scholar 

  • Wang Z-Q, Hu C-H, Fan H-D (2018) Real-remaining useful life prediction for a nonlinear degrading system in service: application to bearing data. IEEE/ASME Trans Mechatron 23(1):211–222

    Google Scholar 

  • Wang Y, Ren X, Nan G, Yang Y, Deng W (2012) Rotating machine fault diagnosis based on denoising source separation. In: 2012 IEEE 5th international conference on advanced computational intelligence. ICACI 2012. Nanjing, Jiangsu, China, pp 1124–1127

  • Wei Y, Xu M, Wang X, Huang W, Li Y (2019) A hybrid approach for weak fault feature extraction of gearbox. IEEE Access 7:16616–16625

    Google Scholar 

  • Weipeng Z (2013) International journal of mining science and technology image denoising algorithm of refuge chamber by combining wavelet transform and bilateral filtering. Int J Min Sci Technol 23(2):221–225

    Google Scholar 

  • Wen L, Gao L, Li X (2019) A new deep transfer learning based on sparse auto-encoder for fault diagnosis. IEEE Trans Syst Man Cybern Syst 49(1):136–144

    Google Scholar 

  • Wu H, Zhao J (2018) Deep convolutional neural network model based process fault diagnosis. Comput Chem Eng 115:185–197

    Google Scholar 

  • Wu H, Zhao J (2020) Fault detection and diagnosis based on transfer learning for multimode chemical processes. Comput Chem Eng 135:1–27

    Google Scholar 

  • Xia M, Li T, Xu L, Liu L, De Silva CW (2018) Fault diagnosis for rotating machinery using multiple sensors and convolutional neural networks. IEEE/ASME Trans Mechatron 23(1):101–110

    Google Scholar 

  • Xiao B, Yin S, Gao H (2018) Reconfigurable tolerant control of uncertain mechanical systems with actuator faults: a sliding mode observer-based approach. IEEE Trans Control Syst Technol 26(4):1249–1258

    Google Scholar 

  • Yaman O, Karaköse M, Ak E, Ayd (2015) Image processing based fault detection approach for rail surface

  • Yan K, Shen W, Mulumba T, Afshari A (2014) ARX model based fault detection and diagnosis for chillers using support vector machines. Energy and Build 81:287–295

    Google Scholar 

  • Yang G-H, Li X-J (2013) Fault diagnosis for non-linear single output systems based on adaptive high-gain observer. IET Control Theory Appl 7(16):1969–1977

    MathSciNet  Google Scholar 

  • Yang S, Member S, Tang Y (2018) Seamless fault-tolerant operation of a modular multilevel converter with switch open-circuit fault diagnosis in a distributed control architecture. IEEE Trans Ind Electron 33(8):7058–7070

    Google Scholar 

  • Yan K, Ji Z, Lu H, Huang J, Shen W, Xue Y (2019a) Fast and accurate classification of time series data using extended elm : application in fault diagnosis of air handling units. IEEE Trans Syst Man Cybern Syst 49(7):1349–1356

    Google Scholar 

  • Yan X, Liu Y, Jia M, Zhu Y (2019b) A multi-stage hybrid fault diagnosis approach for rolling element bearing under various working conditions. IEEE Access 7:138426–138441

    Google Scholar 

  • Yuan J, Liu G, Member S, Wu B (2011) Power Efficiency Estimation-Based Health Monitoring and Fault Detection of modular and reconfigurable robot. IEEE Trans Ind Electron 58(10):4880–4887

    Google Scholar 

  • Zhang Y, Jiang J (2003) Fault tolerant control system design with explicit consideration of performance degradation. IEEE Trans Aerosp Electron Syst 39(3):838–848

    Google Scholar 

  • Zhang L, Zhai J (2018) Fault diagnosis for oil-filled transformers using voting based extreme learning machine. Cluster Comput 1:1–8

    Google Scholar 

  • Zhang Z, Zhao J (2017) A deep belief network based fault diagnosis model for complex chemical processes. Comput Chem Eng 107:395–407

    Google Scholar 

  • Zhang Y, Fan Y, Du W (2016) Nonlinear process monitoring using regression and reconstruction method. IEEE Trans Autom Sci Eng 13(3):1343–1354

    Google Scholar 

  • Zhang G, Zhang H, Huang X, Wang J, Yu H, Graaf R (2016a) Active fault-tolerant control for electric vehicles with independently driven rear in-wheel motors against certain actuator faults. IEEE Trans Control Syst Technol 24(5):1557–1572

    Google Scholar 

  • Zhang H, Bauer L, Kochte MA, Schneider E, Wunderlich H-J, Henkel J (2016b) Aging resilience and fault tolerance in runtime reconfigurable architectures. IEEE Trans Comput 66(6):1

    MathSciNet  MATH  Google Scholar 

  • Zhang D, Qian L, Mao B, Huang C, Huang B, Si Y (2018) A data-driven design for fault detection of wind turbines using random forests and XGboost. IEEE Access 6:21020–2103

    Google Scholar 

  • Zhang J, Wang P, Gao RX, Yan R (2018a) An image processing approach to machine fault diagnosis based on visual words representation. Procedia Manuf 19(2017):42–49

    Google Scholar 

  • Zhang W, Li C, Peng G, Chen Y, Zhang Z (2018b) A deep convolutional neural network with new training methods for bearing fault diagnosis under noisy environment and different working load. Mech Syst Signal Process 100:439–453

    Google Scholar 

  • Zhao Y, Lam J, Gao H (2009) Fault detection for fuzzy systems with intermittent measurements. IEEE Trans Fuzzy Syst 17(2):398–410

    Google Scholar 

  • Zheng S, Zhao J (2020) A new supervised data mining method based on the stacked autoencoder for chemical process fault diagnosis. Comput Chem Eng 135:1–31

    Google Scholar 

  • Zhong ZM, Chen J, Zhong P, Wu JB (2006) Application of the blind source separation method to feature extraction of machine sound signals. Int J Adv Manuf Technol 28(9):855–862

    Google Scholar 

  • Zhong K, Han M, Han B (2020) Data-driven based fault prognosis for industrial systems: a concise overview. IEEE/CAA J Autom Sin 7(2):330–345

    MathSciNet  Google Scholar 

  • Zhou S, Qian S, Chang W, Xiao Y, Cheng Y (2018) A novel bearing multi-fault diagnosis approach based on weighted permutation entropy and an improved SVM ensemble classifier. Sensors (Switzerland) 18(6):1–23

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechatronics Engineering, University of Engineering and Technology, Peshawar, Pakistan

    Anam Abid & Muhammad Tahir Khan

  2. Department of Mechatronics Engineering, College of Electrical and Mechanical Engineering, NUST, Rawalpindi, Pakistan

    Javaid Iqbal

Authors
  1. Anam Abid
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Muhammad Tahir Khan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Javaid Iqbal
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Anam Abid.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Abid, A., Khan, M.T. & Iqbal, J. A review on fault detection and diagnosis techniques: basics and beyond. Artif Intell Rev 54, 3639–3664 (2021). https://doi.org/10.1007/s10462-020-09934-2

Download citation

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10462-020-09934-2

Keywords

Search

Navigation