Abstract
The direct effects of carbon fiber-reinforced polymer (CFRP) composites with a fastener in lightning environments are very complicated. Experimental models were designed to understand the influence of different factors on the damage modes. First, different specimen structures, including unidirectional and woven fabric, were studied. Second, the damage characteristics of the two cases where current injection occurred in the fastener part and the carbon fiber part were experimentally studied. Finally, the different grounding points were studied. The experimental results showed that the woven fabric structure can conduct current better, and the area of lightning damage is smaller than that of the unidirectional ply. The lightning experimental conditions had a significant influence on outgassing, delamination damage characteristics and the lightning phenomenon. A high-speed camera was used to observe the lightning action process. The mechanism of electrical and thermal conversion between fastener and CFRP composites was revealed by discussing the lightning strike process. The damage morphology and lightning phenomena caused by an instantaneous electric field distortion distribution was deduced. The current work provides a reference for effectively designing lightning protection strategies under different lightning strike conditions.
Similar content being viewed by others
Data Availability
All data generated or analysed during this study are included in this published article [and its supplementary information files].
References
Society of Automotive Engineers.: ARP 5412, Aircraft lightning environment and related test waveforms. Warrendale, PA (2013)
Guo, Z.X., Han, X.P., Zhu, X.P.: Finite Element Analysis of Interlaminar Stresses for Composite Laminates Stitched Around a Circular Hole. Appl. Compos. Mater. 19, 561–571 (2012)
Kawakami, H., Feraboli, P.: Lightning strike damage resistance and tolerance of scarf-repaired mesh- protected carbon fiber composites. Compos. Part A 42, 1247–1262 (2011)
Muñoz, R., Delgado, S., González, C., López-Romano, B., Wang, D., LLorca, J.: Modeling lightning impact thermo-mechanical damage on composite materials. Appl. Compos. Mater. 21(1), 149–164 (2014)
Liu, Z.Q., Yue, Z.F., Wang, F.S., Ji, Y.Y.: Combining analysis of coupled electrical-thermal and blow-off impulse effects on composite laminate induced by lightning strike. Appl. Compos. Mater. 21(3) (2014)
Abdelal, G., Murphy, A.: Nonlinear numerical modelling of lightning strike effect on composite panels with temperature dependent material properties. Compos. Struct. 109, 268–278 (2014)
Feraboli, P., Miller, M.: Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strike. Compos. Part A 40, 954–967 (2009)
Yin, J.J., Li, S.L., Yao, X.L., et al.: Lightning strike ablation damage characteristic analysis for carbon Fiber/epoxy composite laminate with fastener. Appl. Compos. Mater. 23, 821–837 (2016)
Wang, B., Duan, Y.G., Xin, Z.B., et al.: Fabrication of an enriched graphene surface protection of carbon fiber/epoxy composites for lightning strike via a percolating-assisted resin film infusion method. Compos Sci and Tec. 158, 51–60 (2018)
Teulet, P., Billoux, T., Cressault, Y., et al.: Energy balance and assessment of the pressure build-up around a bolt fastener due to sparking during a lightning impact. Eur. Phys. J. Appl. Phys. 77, 20801 (2017)
Evans, S., Jenkins, M., Cole, M., et al.: An introduction to a new aerospace lightning direct effects research programme and the significance of Zone 2A waveform components on sparking joints. 33rd International Conference on Lightning Protection (ICLP). 25–30 (2016)
Evans, S.: Characterisation of outgassing from carbon fibre composite aircraft joints subjected to lightning current (2018)
Chemartin, L., Lalande, P., Peyrou, B., et al.: Direct Effects of Lightning on Aircraft Structure: Analysis of the Thermal, Electrical and Mechanical Constraints. J. Aerospace Lab. 5, 1–15 (2012)
Carr, D., Clark, D., Stone, C., et al.: Optical Techniques For the Analysis of Outgassing of Composite Aircraft Joints Under Lightning. 34th Inter Conf on Lightning Protection (ICLP). (2018)
Revel, I., Evans, S., Flourens, F.: Edge glow: A combined voltage/power controlled mechanism. International Conference on Lightning Protection. IEEE. 1–6 (2016)
Feraboli, P., Kawakami, H.: Damage of Carbon/Epoxy Composite Plates Subjected to Mechanical Impact and Simulated Lightning. J. Aircr. 47(3), 999–1012 (2012)
Wang, B., Zhu, Y.S., Ming, Y.K., et al.: Understanding lightning strike induced damage mechanism of carbon fiber reinforced polymer composites: An experimental study. Mater. Des. 192, 108724 (2020)
Khosravani, M.R., Weinberg, K.: Characterization of sandwich composite T-joints under different ageing conditions. Compos. Struct. 197, 80–88 (2018)
Hirano, Y., Yamane, T., Todoroki, A.: Through-thickness electric conductivity of toughened carbon-fibre-reinforced polymer laminates with resin-rich layers. Compos. Sci. Technol. 122, 67–72 (2016)
Sun, J.R., Tian, X.Y., Li, Y.F., et al.: Lightning Strike-Induced Dynamic Conduction Characteristics and Damage Behavior of Carbon Fiber-Reinforced Polymer Composites. Compos. Struct. (2021)
Mulazimoglu, H., Haylock, L.: Recent developments in techniques to minimize lightning current arcing between fasteners and composite structure. ICOLSE 2011 Conf. Proc. (2011)
Katunin, A., Sul, P., Łasica, A., Dragan, K., Krukiewicz, K., Turczyn, R.: Damage resistance of CSA-doped PANI/epoxy CFRP composite during passing the artificial lightning through the aircraft rivet. Eng. Fail. Anal. 82, 116–122 (2017)
Bilisik, K., Sapanci, E.: Experimental determination of fracture toughness properties of nanostitched and nanoprepreg carbon/epoxy composites. Eng. Frac. Mech. 189, 293–306 (2018)
Hirano, Y., Reurings, C., Iwahori, Y.: Damage behavior of CFRP laminate with a fastener subjected to simulated lightning current. European conference on composite materials (2012)
Evans, S., Revel, I., Cole, M., et al.: Lightning strike protection of aircraft structural joints. Lightning Protection. IEEE. (2014)
Kirchdoerfer, T., Liebscher, A., Ortiz, M.: CTH shock physics simulation of non-linear material effects within an aerospace CFRP fastener assembly due to direct lightning attachment. Compos Struct. 189, 357–365 (2018)
Wang, F.S., Ji, Y.Y., Yu, X.S., et al.: Ablation damage assessment of aircraft carbon fiber/epoxy composite and its protection structures suffered from lightning strike. Compos. Struct. 145, 226–241 (2016)
Society of Automotive Engineers.: ARP 5416, Aircraft lightning test methods. Warrendale, PA. (2013)
Toray.: TORAYCA T300 Data Sheet, Technical Data Sheet No. CFA-001. Tokyo, Japan: Toray Carbon Fibers, Inc. (2008)
Mulazimoglu, H., Haylock, L.: Development of conforming sleeve fastener technology for lightning protection of composite aircrafts. Int. Conf. Light. Static Electric. (2009)
Timsit, R.S.: Contact properties of tubular crimp connections: Elementary considerations (2008)
Wang, S.J., Hu, F., Su, B.N., et al.: Method for calculation of contact resistance and finite element simulation of contact temperature rise based on rough surface contact model. Int. Conf. Electric. Contact. (2012)
Dong, Q., Guo, Y.L., Sun, X., Jia, Y.: Coupled electrical–thermal-pyrolytic analysis of carbon fiber/epoxy composites subjected to lightning strike. Polymer 56, 385–394 (2015)
Abdelal, G., Murphy, A.: Nonlinear numerical modeling of lightning strike effect on composite panels with temperature dependent material properties. Compos. Struct. 109, 268–278 (2014)
Wan, G., Dong, Q., Zhi, J., et al.: Analysis on electrical and thermal conduction of carbon fiber composites under lightning based on electrical-thermal-chemical coupling and arc heating models. Compos. Struct. 229, 111486.1–111486.8 (2019)
Sun, J., Li, Y., Tian, X., et al.: Experimental and numerical analysis of damage mechanisms for carbon fiber-reinforced polymer composites subjected to lightning strikes. Eng. Fail. Anal. 118, 104894.1–104894.15 (2020)
Gallimberti, I.: The mechanism of the long spark formation. Le. J. Phys. Colloq. 40(C7), 193–250 (1979)
Wang, Y., Zhupanska, O.I.: Lightning strike thermal damage model for glass fiber reinforced polymer matrix composites and its application to wind turbine blades. Compos. Struct. 132, 1182–1191 (2015)
Braginskii, S.I.: Theory of the development of a spark channel. Sov. Phys. JEPT. 34, 1068–1074 (1958)
Larsson, A.: The interaction between a lightning flash and an aircraft in flight. C. R. Physique. 3, 1423–1444 (2002)
Hidaka, K.: A new method of electric field measurements in corona discharge using Pockels device. Journal of Appl. Phy. 53(9), 5999–6003 (1982)
Sun, J.R., Yao, X.L., Tian, X.Y., Chen, J.L., Wu, Y.: Damage Characteristics of CFRP Laminates Subjected to Multiple Lightning Current Strike. Appl. Compos. Mate. 26, 745–762 (2019)
Ammar-Khodja, I., Picard, C., Fois, M., et al.: Preliminary results on thermo-oxidative aging of multi-hole carbon/epoxy composites. Compos. Sci. Technol. 69, 1427–1431 (2009)
Dong, Q., Guo, Y.L., Chen, J.L., Yao, X.L., et al.: Influencing factor analysis based on electrical-thermal-pyrolytic simulation of carbon fiber composites lightning damage. Compos. Struct. 140, 1–10 (2016)
Shi, Y., Du, B., Liu, Q., et al.: Prediction Model of Gas Expansion and Electro-Thermal Coupling regarding Lightning Damage to Carbon Fiber Composites. Appl. Compos. Mate. (2021)
Acknowledgements
This work was supported by the National Natural Science Foundation for Young Scientists of China [Grant No. 52007146] and the China Postdoctoral Science Foundation [Grant No. 2020M683479].
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of Interest
The Authors declare that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tian, X., Sun, J., Li, Y. et al. Study on the Factors Influencing the Damage Modes of Carbon Fiber-Reinforced Polymer Composites with a Fastener Under Lightning Strike Conditions. Appl Compos Mater 29, 711–727 (2022). https://doi.org/10.1007/s10443-021-09987-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10443-021-09987-8