Skip to main content

Advertisement

SpringerLink
Log in

Planetary gear train microcrack detection using vibration data and convolutional neural networks

  • Original Article
  • Published:
Neural Computing and Applications Aims and scope Submit manuscript

Abstract

Planetary gear trains (PGTs) are widely used in many industrial applications from wind turbines to automobile transmissions due to their high power-to-weight ratio. Since PGT can be subjected to faults and prone to failure over time, a non-intrusive method of monitoring the condition of PGT is required. Vibration-based machine learning algorithms are mostly used in fault diagnosis and classification in PGT, but due to the epicyclic motion of gears, vibration signals from one gear can get neutralized or amplified by signals from another gear. In addition, identification of smaller cracks in the sun gear can be challenging when using vibration-based fault diagnosis alone due to cancelation effects from the planet pinions. In this paper, epicyclic drivetrain of a Chevy Volt hybrid car is considered to study two scenarios: (1) detecting microcracks (0.02 mm) and (2) identifying faults in sun gear while its signal is affected by cracks at the planetary gears. Four different cases: a healthy PGT, PGT with a sun crack, PGT with a planet crack, and a PGT with a sun and a planet crack, were considered and simulated using the MSC ADAMS software. The joint forces at the exterior ring gear were extracted, and a Blackman function was applied to conversion to frequency-domain values. Each of the frequency-domain amplitude values was converted to pixel values in a grayscale image, and the generated images were fed into a convolutional neural network (CNN) to train, validate, and test the datasets. The results indicated that the proposed grayscale 2D CNN algorithm has an accuracy of 92% for the test set.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28

Similar content being viewed by others

References

  1. Thote PV, Thorat A, Nimbalkar P (2016) A general overview on common causes of breakdown in planetary gearbox. Int J Emer Technol Eng Res 4(7):180–183

    Google Scholar 

  2. Yang W, Jiang D, Han T (2017) Effects of tooth breakage size and rotational speed on the vibration response of a planetary gearbox. Appl Sci 7(7):678

    Article  Google Scholar 

  3. Esmail EL (2018) Influence of the operating conditions of two-degree-of-freedom planetary gear trains on tooth friction losses. J Mech Des 140(5):054501

    Article  Google Scholar 

  4. Zeng Q, Zainab M, Shao Y, Gu F, Ball AD (2017) Planetary gear fault diagnosis based on instantaneous angular speed analysis. In: 2017 23rd International conference on automation and computing (ICAC), IEEE, pp 1–6

  5. Liu X, Yang J, Liu H, Cheng G, Chen X, Xu D (2015) Optimizing the adaptive stochastic resonance and its application in fault diagnosis. Fluct Noise Lett 14(04):1550038

    Article  Google Scholar 

  6. Guo Y, Zhao L, Wu X, Na J (2018) Localized faults detection of planetary gear sets based on resonance demodulation and vibration separation. In: 2018 IEEE International instrumentation and measurement technology conference (I2MTC), IEEE, pp 1–6

  7. Khazaee M, Ahmadi H, Omid M, Moosavian A (2012) An appropriate approach for condition monitoring of planetary gearbox based on fast Fourier transform and least square support vector machine. Int J Multidiscip Sci Eng 3(5):22–26

    Google Scholar 

  8. Liu Z, Zuo MJ, Qu J, Xu H (2011) Classification of gear damage levels in planetary gearboxes. In: 2011 IEEE International conference on computational intelligence for measurement systems and applications (CIMSA) proceedings, IEEE, pp 1–5

  9. Liu Z, Qu J, Zuo MJ, Xu H-B (2013) Fault level diagnosis for planetary gearboxes using hybrid kernel feature selection and kernel fisher discriminant analysis. Int J Adv Manuf Technol 67(5–8):1217–1230

    Article  Google Scholar 

  10. Patrick R, Orchard ME, Zhang B, Koelemay MD, Kacprzynski GJ, Ferri AA, Vachtsevanos GJ (2007) An integrated approach to helicopter planetary gear fault diagnosis and failure prognosis. In: 2007 IEEE Autotestcon, IEEE, pp 547–552

  11. Khawaja TS, Georgoulas G, Vachtsevanos G (2008) An efficient novelty detector for online fault diagnosis based on least squares support vector machines. In: 2008 IEEE AUTOTESTCON, IEEE, pp 202–207

  12. Lewicki DG, LaBerge KE, Ehinger RT, Fetty J (2011) Planetary gearbox fault detection using vibration separation techniques, NASA Technical Memorandum 2011–217127, 67th Annual Forum and Technology Display, Virginia Beach, VA

  13. Guo Y, Zhao L, Wu X, Na J (2019) Tooth root crack detection of planet and sun gears based on resonance demodulation and vibration separation. IEEE Trans Instrum Meas 69(1):65–75

    Article  Google Scholar 

  14. Li Y, Gu JX, Zhen D, Xu M, Ball A (2019) An evaluation of gearbox condition monitoring using infrared thermal images applied with convolutional neural networks. Sensors 19(9):2205

    Article  Google Scholar 

  15. Barile C, Casavola C, Pappalettera G, Pappalettere C (2016) Analysis of crack propagation in stainless steel by comparing acoustic emissions and infrared thermography data. Eng Fail Anal 69:35–42

    Article  Google Scholar 

  16. Guo X, Vavilov V (2013) Crack detection in aluminum parts by using ultrasound-excited infrared thermography. Infrared Phys Technol 61:149–156

    Article  Google Scholar 

  17. Mohammed MHAA (2018) Predictive maintenance by using ultrasound technique for rotating equipments in thermal power plants. PhD thesis, Sudan University of Science and Technology

  18. Peng D, Smith WA, Randall RB (2018) Differentiating tooth root cracks and spalls in planet gears from changes in the transmission error. In: International conference on rotor dynamics, Springer, pp 280–289

  19. Liu X, Yang Y, Zhang J (2018) Resultant vibration signal model based fault diagnosis of a single stage planetary gear train with an incipient tooth crack on the sun gear. Renew Energy 122:65–79

    Article  Google Scholar 

  20. Hoang D-T, Kang H-J (2019) Rolling element bearing fault diagnosis using convolutional neural network and vibration image. Cogn Syst Res 53:42–50

    Article  Google Scholar 

  21. Abdeljaber O, Avci O, Kiranyaz S, Gabbouj M, Inman DJ (2017) Real-time vibration-based structural damage detection using one-dimensional convolutional neural networks. J Sound Vib 388:154–170

    Article  Google Scholar 

  22. Hatami N, Gavet Y, Debayle J (2018) Classification of time-series images using deep convolutional neural networks. In: Tenth international conference on machine vision (ICMV 2017), Vol. 10696, International Society for Optics and Photonics, p 106960Y

  23. Cao P, Zhang S, Tang J (2018) Preprocessing free gear fault diagnosis using small datasets with deep convolutional neural network-based transfer learning. IEEE Access 6:26241–26253

    Article  Google Scholar 

  24. Jing L, Wang T, Zhao M, Wang P (2017) An adaptive multi-sensor data fusion method based on deep convolutional neural networks for fault diagnosis of planetary gearbox. Sensors 17(2):414

    Article  Google Scholar 

  25. Jing L, Zhao M, Li P, Xu X (2017) A convolutional neural network-based feature learning and fault diagnosis method for the condition monitoring of gearbox. Measurement 111:1–10

    Article  Google Scholar 

  26. Yao Y, Wang H, Li S, Liu Z, Gui G, Dan Y, Hu J (2018) End-to-end convolutional neural network model for gear fault diagnosis based on sound signals. Appl Sci 8(9):1584

    Article  Google Scholar 

  27. Sun G-D, Wang Y-R, Sun C-F, Jin Q (2019) Intelligent detection of a planetary gearbox composite fault based on adaptive separation and deep learning. Sensors 19(23):5222

    Article  Google Scholar 

  28. Chen R, Huang X, Yang L, Xu X, Zhang X, Zhang Y (2019) Intelligent fault diagnosis method of planetary gearboxes based on convolution neural network and discrete wavelet transform. Comput Ind 106:48–59

    Article  Google Scholar 

  29. Han Y, Tang B, Deng L (2018) Multi-level wavelet packet fusion in dynamic ensemble convolutional neural network for fault diagnosis. Measurement 127:246–255

    Article  Google Scholar 

  30. Wu C, Jiang P, Ding C, Feng F, Chen T (2019) Intelligent fault diagnosis of rotating machinery based on one-dimensional convolutional neural network. Comput Ind 108:53–61

    Article  Google Scholar 

  31. Li T, Zhao Z, Sun C, Yan R, Chen X (2020) Adaptive channel weighted CNN with multi-sensor fusion for condition monitoring of helicopter transmission system. IEEE Sens J 20:8364–8373

    Article  Google Scholar 

  32. Zhao D, Wang T, Chu F (2019) Deep convolutional neural network based planet bearing fault classification. Comput Ind 107:59–66

    Article  Google Scholar 

  33. Jiao J, Zhao M, Lin J, Zhao J (2018) A multivariate encoder information based convolutional neural network for intelligent fault diagnosis of planetary gearboxes. Knowl-Based Syst 160:237–250

    Article  Google Scholar 

  34. Azamfar M, Singh J, Bravo-Imaz I, Lee J (2020) Multisensor data fusion for gearbox fault diagnosis using 2-d convolutional neural network and motor current signature analysis. Mech Syst Signal Process 144:106861

    Article  Google Scholar 

  35. Sun G, Wang Y, Sun C (2019) Fault diagnosis of planetary gearbox based on signal denoising and convolutional neural network. In: 2019 Prognostics and system health management conference (PHM-Paris), IEEE, pp 96–99

  36. Chen X, Peng L, Cheng G, Luo C (2019) Research on degradation state recognition of planetary gear based on multiscale information dimension of SSD and CNN. Complexity 2019:1–12

    Google Scholar 

  37. Jiang G, He H, Yan J, Xie P (2018) Multiscale convolutional neural networks for fault diagnosis of wind turbine gearbox. IEEE Trans Ind Electron 66(4):3196–3207

    Article  Google Scholar 

  38. Li H, Zhang Q, Qin X, Sun Y (2019) K-SVDbased WVD enhancement algorithm for planetary gearbox fault diagnosis under a CNN framework. Measurement Sci Technol 31(2):025003

    Article  Google Scholar 

  39. Sun W, Yao B, Zeng N, Chen B, He Y, Cao X, He W (2017) An intelligent gear fault diagnosis methodology using a complex wavelet enhanced convolutional neural network. Materials 10(7):790

    Article  Google Scholar 

  40. Li C-T, Zhang X, Peng H (2012) Design of power-split hybrid vehicles with a single planetary gear. In Dynamic systems and control conference, Vol. 45301, American Society of Mechanical Engineers, pp 857–865

  41. Awaja F, Zhang S, Tripathi M, Nikiforov A, Pugno N (2016) Cracks, microcracks and fracture in polymer structures: formation, detection, autonomic repair. Prog Mater Sci 83:536–573

    Article  Google Scholar 

  42. Park K-J, Hwang J-Y, Ryu H-H, Maglia F, Kim S-J, Lamp P, Yoon CS, Sun Y-K (2019) Degradation mechanism of NI-enriched NCA cathode for lithium batteries: are microcracks really critical? ACS Energy Lett 4(6):1394–1400

    Article  Google Scholar 

  43. Riemer A, Leuders S, Thone M, Richard H, Troster T, Niendorf T (2014) On the fatigue crack growth behavior in 316l stainless steel manufactured by selective laser melting. Eng Fract Mech 120:15–25

    Article  Google Scholar 

  44. Li H, Liu J, Ma J, Shao Y (2019) Effect of the radial support stiffness of the ring gear on the vibrations for a planetary gear system. J Low Freq Noise, Vib Active Control 39:1024–1038

    Article  Google Scholar 

  45. Budynas RG, Nisbett JK et al (2008) Shigley’s mechanical engineering design, vol 8. McGraw-Hill, New York

    Google Scholar 

  46. Xue S, Howard I (2018) Torsional vibration signal analysis as a diagnostic tool for planetary gear fault detection. Mech Syst Signal Process 100:706–728

    Article  Google Scholar 

  47. Liu X, Yang Y, Zhang J (2017) Effects of toothcrack-induced mesh stiffness on fault signals of a planetary gear train. Proc Comput Sci 109:785–792

    Article  Google Scholar 

  48. Lancini M, Bodini I, Petrogalli C, Provezza L, Faccoli M, Sansoni G, Solazzi L, Mazzu A (2019) Damage phenomena characterization in RCF tests using image analysis and vibration-based machine learning

  49. Khodabandehlou H, Pekcan G, Fadali MS (2019) Vibration-based structural condition assessment using convolution neural networks. Struct Control Health Monit 26(2):e2308

    Google Scholar 

  50. Nguyen D, Kang M, Kim C-H, Kim J-M (2013) Highly reliable state monitoring system for induction motors using dominant features in a two-dimension vibration signal. New Rev Hyper Multimed 19(3–4):248–258

    Article  Google Scholar 

  51. Li Y, Cheng G, Pang Y, Kuai M (2018) Planetary gear fault diagnosis via feature image extraction based on multi central frequencies and vibration signal frequency spectrum. Sensors 18(6):1735

    Article  Google Scholar 

  52. Sharma S (2017) Activation functions in neural networks. Towards Data Sci 6:310–316

    Google Scholar 

  53. Chen M, Jiang H, Liao W, Zhao T (2019) Efficient approximation of deep relu networks for functions on low dimensional manifolds. Adv Neural Inf Process Syst 32:8174–8184

    Google Scholar 

  54. Hanin B, Rolnick D (2019) Deep relu networks have surprisingly few activation patterns. In: Advances in neural information processing systems, pp 361–370

  55. Dukhan M, Ablavatski A (2020). The two-pass softmax algorithm. arXiv preprint arXiv:2001.04438

  56. Blanchard P, Higham DJ, Higham NJ (2019). Accurate computation of the log-sum-exp and softmax functions. arXiv preprint arXiv:1909.03469

  57. Ulus S, Erkaya S (2016) An experimental study on gear diagnosis by using acoustic emission technique. Int J Acoust Vib 21(1):103–111

    Google Scholar 

  58. Ma J, Liu T, Zha C, Song L (2019) Simulation research on the time-varying meshing stiffness and vibration response of micro-cracks in gears under variable tooth shape parameters. Appl Sci 9(7):1512

    Article  Google Scholar 

  59. Wang Q, Zhu Y, Zhang Z, Fu C, Dong C, Su H (2016) Partial load: a key factor resulting in the failure of gear in the wind turbine gearbox. J Fail Anal Prev 16(1):109–122

    Article  Google Scholar 

  60. Boldsaikhan E, Corwin EM, Logar AM, Arbegast WJ (2011) The use of neural network and discrete Fourier transform for real-time evaluation of friction stir welding. Appl Soft Comput 11(8):4839–4846

    Article  Google Scholar 

Download references

Funding

No funding was received for conducting this study.

Author information

Authors and Affiliations

  1. Mechanical Engineering Department, Wichita State University, Wichita, KS, 67260, USA

    Suveen Emmanuel & Yimesker Yihun

  2. Mechanical Engineering Department, San Diego University, San Diego, CA, 92182, USA

    Zahra Nili Ahmedabadi

  3. Industrial Systems & Manufacturing Engineering Department, Wichita State University, Wichita, KS, 67260, USA

    Enkhsaikhan Boldsaikhan

Authors
  1. Suveen Emmanuel
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yimesker Yihun
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zahra Nili Ahmedabadi
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Enkhsaikhan Boldsaikhan
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Enkhsaikhan Boldsaikhan.

Ethics declarations

Conflict of interest

The authors have no conflict of interest nor competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Emmanuel, S., Yihun, Y., Nili Ahmedabadi, Z. et al. Planetary gear train microcrack detection using vibration data and convolutional neural networks. Neural Comput & Applic 33, 17223–17243 (2021). https://doi.org/10.1007/s00521-021-06314-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00521-021-06314-x

Keywords

Search

Navigation