Habitat selection of a parasitoid mediated by volatiles informing on host and intraguild predator densities

To locate and evaluate host patches before oviposition, parasitoids of herbivorous insects utilize plant volatiles and host-derived cues, but also evaluate predator-derived infochemicals to reduce predation risks. When foraging in host habitats infested with entomopathogenic fungi that can infect both a parasitoid and its host, parasitoids may reduce the risk of intraguild predation (IGP) by avoiding such patches. In this study, we examined whether the presence of the entomopathogenic fungi Metarhizium brunneum and Beauveria bassiana in soil habitats of a root herbivore, Delia radicum, affects the behavior of Trybliographa rapae, a parasitoid of D. radicum. Olfactometer bioassays revealed that T. rapae avoided fungal infested host habitats and that this was dependent on fungal species and density. In particular, the parasitoid avoided habitats with high densities of the more virulent fungus, M. brunneum. In addition, host density was found to be important for the attraction of T. rapae. Volatiles collected from host habitats revealed different compound profiles depending on fungal presence and density, which could explain the behavior of T. rapae. We conclude that T. rapae females may use volatile compounds to locate high densities of prey, but also compounds related to fungal presence to reduce the risk of IGP towards themselves and their offspring. Electronic supplementary material The online version of this article (doi:10.1007/s00442-015-3326-2) contains supplementary material, which is available to authorized users.


Introduction
When two species which share a common prey resource interact with each other in terms of competition and predation per se this is known as intraguild predation (IGP) (Polis et al. 1989). The interaction can be either unidirectional or bidirectional and, in the latter case, the roles as IG predator and IG prey can shift. An example of a unidirectional IGP system is when a pathogen can infect both a herbivore and its parasitoid (Rosenheim et al. 1995;Straub et al. 2008).
Natural enemies of herbivores can utilize volatile secondary metabolites emitted by plants attacked by herbivores, i.e., herbivore-induced plant volatiles (HIPVs), when searching for prey (Dicke and Baldwin 2010). HIPVs and other host-derived cues have been shown to guide female parasitoids to locate and evaluate host patches before oviposition (Vet and Dicke 1992;Wäschke et al. 2013). It is also well established that host density plays a role when parasitoid females select suitable habitats for oviposition Abstract To locate and evaluate host patches before oviposition, parasitoids of herbivorous insects utilize plant volatiles and host-derived cues, but also evaluate predatorderived infochemicals to reduce predation risks. When foraging in host habitats infested with entomopathogenic fungi that can infect both a parasitoid and its host, parasitoids may reduce the risk of intraguild predation (IGP) by avoiding such patches. In this study, we examined whether the presence of the entomopathogenic fungi Metarhizium brunneum and Beauveria bassiana in soil habitats of a root herbivore, Delia radicum, affects the behavior of Trybliographa rapae, a parasitoid of D. radicum. Olfactometer bioassays revealed that T. rapae avoided fungal infested host habitats and that this was dependent on fungal species and density. In particular, the parasitoid avoided habitats (Waage 1983;Connor and Cargain 1994;Hemachandra et al. 2007;Girling et al. 2011). The mechanism involved may be an increase in emitted HIPVs with higher host densities (Girling et al. 2011). However, parasitoid host foraging assumes trade-offs between oviposition sites (i.e., expected fitness gain) and the risk of predation (Weisser et al. 1994;Roitberg et al. 2010). In addition to host-derived cues, parasitoids may also respond to predator-derived infochemicals and avoid predation risks by diverting foraging to "safer" habitats (Raymond et al. 2000;Dicke and Grostal 2001;Nakashima et al. 2004;Meisner et al. 2011). Thus, by exhibiting variable anti-predator behavior, parasitoids can partly or fully avoid the potential disruptive impact of IGP (Snyder and Ives 2008).
Generalist entomopathogenic fungi can act as IG predators, as they infect insects at different trophic levels (Brooks 1993;Roy and Pell 2000;Furlong and Pell 2005). Entomopathogenic fungi are also known to affect the behavior of insects in different ways (Roy et al. 2006;Baverstock et al. 2010) and predators have been found to perceive and avoid fungal infested habitats, as well as infected prey and conspecifics (Meyling and Pell 2006;Ormond et al. 2011). Parasitoids may also be able to evaluate the IGP risk when foraging in fungal infested host habitats. Upon encountering fungal infected hosts in choice situations, both avoidance (Brobyn et al. 1988;Fransen and van Lenteren 1993) as well as a lack of avoidance (Lord 2001;Baverstock et al. 2005) have been demonstrated for different parasitoid species. During growth, fungi produce volatile metabolites (Crespo et al. 2008), which can be used as infochemicals by insects to avoid unsuitable habitats (Mburu et al. 2013). Furthermore, it is increasingly recognized that the host-habitat-selection behavior of natural enemies of herbivores can also be influenced by rhizosphere-inhabiting microbes via induced changes in the composition of released HIPVs (Guerrieri et al. 2004;Schausberger et al. 2012;Battaglia et al. 2013;Pineda et al. 2013;Soler et al. 2013).
In a host-pathogen-parasitoid system we studied the habitat choice of the wasp Trybliographa rapae Westwood (Hymenoptera: Figitidae), an oligophagous, solitary parasitoid of the below-ground larval stages of several Delia spp. (Diptera: Anthomyiidae) (Wishart and Monteith 1954). We used larvae of the cabbage root fly, Delia radicum L., a herbivore of roots of cruciferous plants in temperate climates (Finch 1989), feeding on white cabbage plants, as a model host habitat. Host habitat location by T. rapae females is mainly guided by olfactory cues with HIPVs released by the plant in combination with host-related cues (e.g., saliva, feces) informing the parasitoid of host presence (Brown and Anderson 1999;Neveu et al. 2002;Nilsson et al. 2012) and host density (Hemachandra et al. 2007). As pathogens, we used the generalist entomopathogenic fungi Metarhizium brunneum Petch and Beauveria bassiana (Balsamo) Vuillemin (Ascomycota: Hypocreales), which are ubiquitous in the soil environment (Meyling and Eilenberg 2007) and occur naturally at higher densities in plant rhizospheres than in the surrounding soil (Bruck 2010). These fungi can infect both D. radicum and T. rapae (Rännbäck et al. 2015), but it is currently unknown to what extent fungal presence in the host habitat influences foraging decisions by T. rapae females to reduce the risk of unidirectional IGP.
In the present study we addressed the following questions: 1. Do T. rapae females avoid D. radicum host habitats infested by different species of generalist entomopathogenic fungi? 2. If avoidance is observed, is this dependent on the densities of host larvae and fungus? 3. Is parasitoid selection in this system linked to changes in the composition of volatile emissions from the host habitats?

Insect and plant material
The D. radicum culture used in the study originated from a laboratory culture at Warwick Crop Centre, Wellesbourne, UK, and was reared following the method described by Finch and Coaker (1969). The T. rapae culture originated from a laboratory culture from the University of Rennes, France, and the rearing method was modified from Neveu et al. (1996). In both insect cultures, we introduced fieldcollected insects from Sweden every year. The adult wasps and flies were kept in separate cabinets at 19 °C and a constant photoperiod of 16-h light:8-h dark (L:D). We provided the adult parasitoids with sucrose water and honey droplets and the adult flies with a mixture of honey, dried yeast, and milk powder, replacing the food twice a week. Female parasitoids used in the experiments were separated according to age (day of emergence), provided sucrose water and kept in rearing cabinets with males for mating. We sowed seeds of white cabbage (Brassica oleracea var. capitata f. alba cv. Castello) in potting soil (Hasselfors Garden Special; Hasselfors Garden, Sweden) mixed with a slow-release fertilizer (Osmocote Pro 3-4 months, nitrogen-phosphorous-potassium 17-11-10 plus micronutrients; Weibulls Horto, Sweden) in 1.5-and 3.0-L plastic pots. The pots were then kept in a greenhouse chamber [22 ± 1 °C, 75 % relative humidity (RH), 16L:8D photoperiod] and the plants were used in experiments when they had eight and ten true leaves, corresponding to an age of 2 months. Plant infestation involved placing 15 or 30 D. radicum eggs around the stem base of the plant, and covering them with damp soil, 9 days prior to the fungal inoculation. Since the egg hatching rate was not 100 % we established two levels of infestation: lightly infested plants (LIP; from one to ten larvae) or heavily infested plants (HIP; 15-30 larvae). Plants with 11-14 larvae were excluded from the analysis and uninfested plants (UP) used as controls. At the end of each experiment, we recorded the number of larvae on each plant.

Fungal inoculation of plants
Two fungal isolates of M. brunneum (isolate KVL 04-57) and B. bassiana (isolate KVL 03-90), stored at −80 °C at the University of Copenhagen, Department of Plant and Environmental Sciences, were used in this study. For the preparation of cultures and conidial suspensions, we followed the methods described by Rännbäck et al. (2015). Concentrations of undiluted stock suspensions were established by serial dilutions and enumerations in a hemocytometer (0.0625 mm 2 , depth 0.200 mm; Fuchs-Rosenthal, VWR, Sweden). To determine conidia viability, we assessed the proportion of germinated conidia under 400× magnification after 24 h growth on Sabouraud dextrose agar. Germination was always more than 95 %. All stock suspensions were used on the day after preparation, at which time the fungal suspensions for the experiments were prepared.
We performed fungal inoculation of the plants 48 h prior to the experiments by manually pouring the fungal suspension around the stem base, in close proximity to the actively feeding D. radicum larvae. The HIP in 3.0or 1.5-L pots received 40 or 20 mL of fungal suspension, respectively. To flush the conidia further down the root system, 20 or 10 mL, respectively, of tap water was added around the stem base immediately after the application of the fungal suspension. The same volumes of tap water were used for UP pots. We established two different densities of B. bassiana (B. bassiana-High, 1 × 10 9 conidia mL −1 ; B. bassiana-Low, 1 × 10 8 conidia mL −1 ) and M. brunneum (M. brunneum-High, 1 × 10 8 conidia mL −1 ; M. brunneum-Low, 5 × 10 7 conidia mL −1 ). These densities were based on a pilot study, in which the low densities resulted in <20 % larval mortality and the high densities resulted in >50 % larval mortality in D. radicum, as reported previously by Chandler and Davidson (2005) for Metarhizium anisopliae. As a lower inoculum level was required for M. brunneum compared with B. bassiana to achieve this effect, we assumed that the different fungal densities resulted in comparable infection levels of the two fungal species in D. radicum larvae.

Olfactometer bioassay
We evaluated the responses of host-naïve T. rapae females to host density and fungal infested habitats in an olfactometer set-up as described by Jönsson et al. (2005). For host density responses, we tested three treatment combinations: UP vs. LIP, UP vs. HIP, and LIP vs. HIP (Fig. 1a). For responses to fungal infested habitats, the tested combinations were UP vs. HIP with B. bassiana-High, B. bassiana-Low, M. brunneum-High and M. brunneum-Low (Fig. 1b) and HIP vs. the same four fungal treatments (Fig. 1c). Test on two-tailed binomial distribution, *P < 0.05, **P < 0.01, ***P < 0.001, ns not significant, n numbers of female responders, n.c. percentages of female responders not making a choice (excluded from the statistical analysis) All experiments were conducted in a climate chamber at 24 °C, 60 % RH and a light intensity of 1300 lux (measured at the Y-tube intersection), between 8 a.m. and 5 p.m. The air introduced into the set-up was pumped through a bottle (250 mL) with activated charcoal to eliminate surrounding odors, and then through a bottle with water to provide humidity (7-Ah, 12-V Micropump; KNF Neuberger, Germany). We adjusted the air flow rate to each arm of the olfactometer to 0.8 ± 0.2 L min −1 by a flow meter and then allowed the parasitoids to acclimatize to room conditions for at least 30 min before being tested in the olfactometer. A piece of black plastic tube (2 cm) covered the arm 1 cm from the junction of the Y-shaped glass tube [arm length 220 mm, 15 mm inner diameter (ID)], in order to calm the insect before it chose a direction. We tested parasitoids individually and recorded a choice when they moved 5 cm into one of the arms and stayed there for no less than 30 s. Parasitoids which did not make a choice within 5 min were discarded and excluded from the statistical analysis. After tests on five individuals we shifted the position of the stimuli in the olfactometer, in order to eliminate potential positional bias. Moreover, after ten individuals had been tested we renewed the Y-tube stimuli source. Thus, each replication, which consisted of ten females, lasted <2 h. After use, all corks, Teflon tubes and Y-tubes were rinsed with ethanol (70 %) and sterile water and the Y-tube was heated in an oven at 400 °C for 8 h between experimental days. We prepared the odor stimuli by carefully removing the plants (including soil) from the pot and placing them in a polyacetate cooking bag (35 × 43 cm) (Toppits; Melitta), attached tightly with tape to the olfactometer. Plants grown in different-sized pots (1.5 and 3 L) were tested in order to check whether stress in root system growth could influence parasitoid choice.

Volatile collection
To collect volatiles, we carefully removed an entire plant (including soil) from the pot, placed it in the same type of cooking bag used in the olfactometer experiments and sealed it to the Teflon tubes (ThermoFisher Scientific, Santa Clara, CA) of the collection set-up with tape. Volatile collection involved the following seven treatments (only 3-L pots): empty bags, soil, UP, HIP, and HIP with B. bassiana-High, M. brunneum-High, and M. brunneum-Low, with five replicate plants for HIP and eight for the other treatments. The volatile collection system comprised a tandem Teflon filter holder, so that the sampled odors passed through each adsorbent filter in sequence. Each Teflon tube was 25 mm long with 3 mm ID and the front filter contained 15 mm of Tenax GR (80-60 mesh) (Scantec; Lab AB, Partille, Sweden) and the second filter 15 mm Porapak-Q (80-100 mesh) (Scantec; Lab AB). Each filter tube was held by two stoppers of Teflon tube (2 mm ID) and glass wool. We inserted the filters into the polyacetate bags, placed a charcoal filter in the opposite corner to purify incoming air and drew out volatiles using a reversed aquarium Rena 300 pump (Mars Fishcare, Chalfont, PA) at a flow rate through the filters of 100 mL air min −1 before starting the experiment, a value measured and adjusted by a flow meter. Volatile collection continued for 4 h, under the same climate chamber conditions as in the olfactometer experiments.
For analysis, we eluted each pair of adsorbent filters in individual GC vials with 500 µL hexane (purity ≥99 %; Fluka, Buchs, Switzerland). Each GC vial received 2 µL of an internal standard mixture containing 250 ng µL −1 heptyl acetate and 250 ng µL −1 undecyl acetate and then all vials were capped and stored at −20 °C until analysis. Before gas chromatography-mass spectrometry (GC-MS) analysis, the samples were concentrated with a stream of nitrogen to approximately 30-40 µL.

Chemical analysis and compound identification
The system used for sample analysis comprised an Agilent 6890 N GC connected to an Agilent 5973 MS and a deconvolution reporting system (version A.02.00; Agilent Technologies) for compound identification. The method for compound analysis and identification is identical to that described in detail by Thöming et al. (2014). The identity of six selected compounds [dimethyl disulfide, β-myrcene, o-xylene, 3-hexanol, (Z)-3-hexen-1-yl-acetate and 1,3-ditert-butylbenzene] was verified by comparing mass spectra, Kovats index, and retention time with those obtained for synthetic standards (Sigma-Aldrich, Zwijndrecht, the Netherlands) on the same column. Relative amounts of identified compounds were calculated by dividing the peak area (using the area from the total ion chromatogram) by the area of the internal standard heptyl acetate. Only compounds found exclusively in treatments with D. radicum-infested plants were analyzed further, i.e., we excluded all compounds found in control samples (empty bags and soil) and UP.

Statistical analysis
Data analysis began with data exploration, following the protocol described by Zuur et al. (2010) and using R software (R Core Team 2012). The first analysis examined the female responses of every single treatment combination ( Fig. 1) to determine whether there was a preference for one of the two odor sources. A two-tailed binomial test was applied with the null hypothesis that the distribution of the parasitoids over the two arms of the olfactometer was 50:50.
The second analysis focused on factors that might have affected the response of parasitoids among all the different treatment combinations which included fungi (Fig. 1b, c). We modeled the probability of choosing a fungal infested host habitat (π i ) as a function of several covariates by fitting a Bernoulli generalized linear model (GLM) with logistic link function log(πi) = η i . We assume that the N i female parasitoids are independent, because each parasitoid in group i has the probability π i . The covariates used in the predictor function (η i ) were two continuous variables (searching time and difference in larval density) and three factors (fungal treatment, arm orientation and pot size) as main terms (Table 1). Thus, the predictor function was written as follows: and this model was built in a Bayesian framework using JAGS software (Plummer 2008), and implemented in the R2jags package (Su and Yajima 2012). A Bayesian approach has been suggested to describe how parasitoids forage in a patchy environment (Pierre and Green 2008). We ran our model with 50,000 iterations and three chains in the Markov chain Monte Carlo (MCMC) process and dropped the first 40,000 iterations as the burn-in period. A thinning rate of ten based on initial checks for convergence, resulted in 3000 observations for calculating the posterior distributions. The forward selection procedure was used as model selection and the deviance information criterion (DIC) (Spiegelhalter et al. 2002) was used to choose the model best explaining the factors influencing habitat choice by T. rapae females. Models with smaller DICs are preferable. Finally, we estimated the posterior parameter distributions and observed covariate data to predict the mean response for the fitted model and obtain 99 % confidence intervals for the fit.
Finally, we applied a principal component analysis (PCA) ordination technique to the relative amounts of identified compounds to graphically represent multivariate patterns in volatile emissions for plant treatments with or without fungi for different fungal species and fungal densities. Before the analysis was carried out, we normalized the variables and removed highly correlated compounds using variance inflation factors to assess which compounds were collinear (Montgomery and Peck 1992).
The PCA was based on the Euclidian distance between observations (scaling two) and the results displayed graphically in a PCA distance biplot using the vegan package (Oksanen et al. 2013). To assess differences in the volatiles between treatments, we used permutational multivariate ANOVA (PerMANOVA), which employs a permutation procedure to assess significance and thus does not rely on the assumption of multivariate normality (Anderson 2001).
We tested the effect of the treatments using ANOVA on peak areas for each compound using the Kruskal-Wallis non-parametric test and Bonferroni-corrected Mann-Whitney U-tests for post hoc comparisons.

Choice of host habitat
The responses of T. rapae to volatiles emitted from D. radicum-infested habitats depended on the host densities of the plant pairs. Females were significantly attracted to volatiles from HIP compared with UP and LIP. However, the responses of the parasitoids were not significantly different when they were offered UP and LIP (Fig. 1a). When T. rapae encountered UP versus HIP with any fungus, females significantly preferred the plants with host odors, despite the presence of the fungus. This response was independent of fungal species or fungal density (Fig. 1b). On choosing between HIP and HIP with fungus added, females showed a significant avoidance response only for M. brunneum-High. Neither B. bassiana at any density nor M. brunneum-Low affected the choice by T. rapae between HIP and HIP with fungus (Fig. 1c).

Factors affecting choice of host habitat with fungal presence
In the Bernoulli GLM we evaluated whether the distribution of choices of T. rapae among all the different treatment combinations was significantly affected by the factors listed in Table 1, i.e., which covariates influenced parasitoid responses. The response values were: avoidance (values 0) or attraction (values 1) towards a HIP with fungus.
We compared the first ten potential models including only main terms based on their DIC values (Online Resource 1). Model 9 had the smallest DIC, but model 7 had only a slightly higher DIC. Due to the small difference between these two values of DIC, we selected the simpler model 7 for model interpretation. Furthermore, model 7, including differences in larval density and fungal treatment, showed a good mixing of chains with the three lines of chains hovering around equilibrium (Online Resource 2).
In addition to findings in Fig. 1b and c, where the treatment combinations are analyzed individually, the results of the Bernoulli GLM (model 7) showed that differences in density of D. radicum larvae between plant pairs significantly influenced parasitoid choice, independently of fungal species or fungal density ( Table 2). The model results also showed that, despite the larval density effect, the attraction to HIP with fungus was significantly different depending on fungal species and fungal density. Table 2 compares the three fungal treatments: M. brunneum-High, M. brunneum-Low and B. bassiana-Low with reference to B. bassiana-High, which is absent since it is the baseline factor. In the presence of M. brunneum-High, the probability of attraction towards a fungal infested habitat was significantly lower than when T. rapae encountered B. bassiana-High. This effect was less significant in the presence of M. brunneum-Low and non-significant in the presence of B. bassiana-Low. Figure 2 provides a visual interpretation of model 7. The results of the models 2-5 with all the individual factors (Online Resource 3) showed that, in addition to difference in larval density, fungal species or fungal density, only arm orientation had a significant effect on determining the parasitoid´s choice, when it was analyzed individually.

Plant volatiles
Analysis of the volatiles trapped from HIP and HIP with fungus using multivariate statistics (after removing compounds found in UP, empty bags and soil) revealed 14    (Table 3). From these compounds (COMP1-14), we only included COMP2, COMP5-6 and COMP9-14 in the PCA analysis, after discharging highly correlated compounds. Although PCA can deal with correlation (Zuur et al. 2007), those compounds which presumably measured the same underlying aspect of volatile emissions from the habitats were removed, assuming that including the redundant variables can cause the PCA to overemphasize their contribution. The first three PCs accounted for 62.40 % of the total variation of the data set. The biplot represents PC1 and PC2 (Fig. 3) and loadings of the first three PCA are presented in Online Resource 4. PC1 and PC2 were chosen because they clearly discriminated amongst the plant groups. As can be observed in Fig. 3, there are grouping clusters of samples. HIP and HIP with M. brunneum-Low can be differentiated from HIP M. brunneum-High and from B. bassiana-High. In the biplot the distance between the points shows the similarity in the observations (plants) based on the volatile compounds (lines). The projection of a point on a line represents the contribution of a certain compound to the volatile profile of that specific plant. Thus, the PCA loading table (Online Resource 4) indicates that 1,3-di-tertbutylbenzene was highly related to plants with M. brunneum-High while compounds such as dimethyl disulfide and 1-ethyl-3-methylbenzene are more representative of HIP. Finally, allyl isothiocyanate is located next to HIP with M. brunneum-Low.
The PerMANOVA showed that fungal species and fungal density affected the odor profile exhibited by HIP (PerMANOVA, F 3,22 = 2.308, P < 0.001). Furthermore, Kruskal-Wallis tests followed by post hoc tests comparing the relative amounts of individual compounds emitted from HIP plants under the different treatments indicated significant differences for the compounds 1-ethyl-3-methylbenzene, unknown, and 1,3-di-tert-butylbenzene. However, only the latter compound differentiated high fungal densities of both fungal species from HIP and the plants with M. brunneum-Low (Table 3). This, combined with the separation in the PCA biplot, indicated differences between treatments.

Discussion
In this study we demonstrated that the belowground foraging parasitoid T. rapae was less attracted to host habitats infested by entomopathogenic fungi when searching for hosts. The fungi represented an IGP risk and we found that the lower attraction depended on fungal species and density. In addition, an earlier study showed that T. rapae females oviposit more in healthy hosts than in hosts infected by M. brunneum in a dual-choice experiment (Rännbäck et al. 2015). This indicates an ability of female T. rapae to evaluate host quality and IGP risks to their offspring. Furthermore, we found that when hosts were present in the habitat at high densities, this factor was more important for parasitoid attraction than presence of IG predators. Successful evaluation and response to cues indicating habitat quality, such as host density and presence of IGP risk, would allow T. rapae to select the most profitable host patch, leading to maximal reproductive success. Similarly, other studies on herbivore-natural enemy systems have reported that parasitoids make foraging decisions based on the risk of IGP  (Raymond et al. 2000;Snyder and Ives 2008;Meisner et al. 2011;Velasco-Hernández et al. 2013), which may increase parasitoid fitness.
Spatial patchiness, described as heterogeneous environments in which prey and predators are spatially distributed (Hassell and May 1988), can influence the dynamics of host-parasitoid interactions, among other factors (Hassell 2000). Locating suitable hosts is critical for parasitoid fitness and responses to cues related to high host densities should be selected for. The distribution of T. rapae represents an example of parasitism with a direct densitydependent pattern. Under natural conditions, parasitoids with this type of functional response are aggregated in patches of high host density (Hassell and May 1973;Jones and Hassell 1988). Indeed, high host densities were most attractive to T. rapae females in the present study, which is in agreement with previous findings (Neveu et al. 2002;Hemachandra et al. 2007). Similarly, entomopathogenic fungi often display clumped distributions in the soil environment (Meyling and Eilenberg 2007). In such situations, the IGP risk in the particular patch may become important during host searches, as females could disperse from patches where IGP risks are present into alternative unexploited host patches. This decision to disperse by the IG prey, T. rapae, when encountering entomopathogenic fungi, and the absence of the IG predator in certain patches, could lead to a higher survival rate of the IG prey. This fundamental ecological principle (dispersal-competition tradeoff) has been applied to explain how spatial processes can promote coexistence between two competing species (Tilman 1994). Furthermore, besides increasing reproductive success, a preference for exploiting highly profitable host patches may also provide enemy-free space for D. radicum where populations are low. Both mechanisms will ultimately stabilize the host-parasitoid population dynamics (Vet 1999).
Our behavioral studies indicated that foraging T. rapae females reduce the IGP risk to themselves and their offspring through avoidance of host habitats with high densities of the IG predator M. brunneum. Avoidance responses to potential IGP risks to parasitoid offspring from entomopathogenic fungi have been observed in other studies with infected hosts (Brobyn et al. 1988;Fransen and van Lenteren 1993). However, in these studies no IGP risk was posed to the foraging parasitoid, as the fungal species tested were not pathogenic to adults. In contrast, our host-pathogen-parasitoid system included an IGP risk to both adult females and their offspring. Both fungal isolates used are pathogenic to adult T. rapae and to larvae of their host, D. radicum, with the M. brunneum isolate exhibiting the higher virulence (Rännbäck et al. 2015). Since the fungal species may infect the parasitoid larva inside the fungal infected host as well as the adult female parasitoid T. rapae during host foraging, both coincidental (IGP occurring when two species simultaneously attack a prey individual) and omnivorous (IGP occurring independently of prey consumption) IGP (Straub et al. 2008) respectively, are risks to T. rapae. If the foraging female fails to perceive an IGP risk and does not avoid fungal infested host habitats, coincidental IGP towards parasitoid larvae developing in infected hosts is likely. Furthermore, fungal infected T. rapae females can perceive an IGP risk to themselves and compensate for a reduced life expectancy through an increase in oviposition rate (Rännbäck et al. 2015).
Volatile collections from host habitats with IGP risk displayed different compound profiles, which correlated with the behavioral response observed for T. rapae in the bioassays.
The volatiles emitted from the plant-larvae host complex differed depending on whether the HIPs had been treated with fungus and on fungal density. The compound 1,3-di-tert-butylbenzene, an alkyl benzene, occurred only when high densities of either of the fungal isolates were present. Alkyl benzenes have previously been detected in fungal cultures (Jeleń and Wasowicz 1998). It has been reported that 1,3-di-tert-butylbenzene is released by B. bassiana (Crespo et al. 2008), and moreover, is emitted as the main volatile compound from mycelium cultures of another ascomycete, Tuber borchii Vitt (Tirillini et al. 2000). Its presence in our experimental habitats may indicate actively growing mycelium, but we cannot conclude whether 1,3-di-tert-butylbenzene originates from an interaction with cabbage roots, growth on larval cuticles, or a combination of these. Another interesting volatile is dimethyl disulfide, which we found in all treatments except M. brunneum-High. This compound is emitted by plants heavily infested with D. radicum larvae and it has been found to be attractive to the main predators of D. radicum in the field (Ferry et al. 2007). The absence of dimethyl disulfide in M. brunneum-High may have contributed to the reduced attraction of T. rapae to this treatment in our experiment. A substantial reduction in the feeding of D. radicum larvae could be evident due to the high virulence of the fungus, especially at high fungal densities (Rännbäck et al. 2015), and thus lead to lower emission rates of dimethyl disulfide. The females may use cues of host density and host quality, e.g., feeding status, fungal infection (IG predator), to detect differences between habitats and make foraging decisions. The composition and quantity of emitted volatiles constitute that cue.
Recently, entomopathogenic fungi were shown to be able to colonize the rhizosphere of several plants (Bruck 2010;Sasan and Bidochka 2012;Akutse et al. 2013;Razinger et al. 2014). The resulting mycelium could potentially be responsible for the production of volatile compounds such as 1,3-di-tert-butylbenzene, or induction 1 3 of yet unknown compounds emitted by the plant. The ecological consequences of this plant-fungus interaction for other organisms are currently not fully understood. In contrast to our findings, Kepler and Bruck (2006) reported that a combination of pine tree roots and M. brunneum attracts larvae of the belowground herbivore Otiorhynchus sulcatus (F.) (Coleoptera: Curculionidae). The mechanisms behind this response are, however, unknown. Furthermore, there is increasing evidence that other root-colonizing fungi can induce changes in the profile of volatile organic compounds released by plants attacked by herbivores, resulting in the increased attraction of natural enemies (Schausberger et al. 2012;Battaglia et al. 2013;Pineda et al. 2013). However, in our system it remains to be identified which compounds are behaviorally active and whether their emission from the plant is caused by fungus, plant roots, host larvae or a combination of these.
Our findings show that host habitats infested with virulent fungi can influence the behavior of foraging parasitoids during host location. A dispersal strategy to visit patches unexploited by fungi may favor parasitoids by allowing them to forage in an enemy-free space and thus most likely achieve greater reproductive success. However, we also found that parasitoids encountering high-density host patches may ignore fungal presence in the habitat. These results emphasize the importance of understanding the behavior of foraging parasitoids when they visit patches with IG predators, since avoiding IGP risk is crucial for their survival and fitness.