Precomputed optimal one-hop motion transition for responsive character animation

Characters in interactive 3D applications are often animated by creating transitions from one motion clip to another in response to user input. It is not trivial, however, to achieve quick, natural-looking transitions between two arbitrary motion clips, especially when the two motions are dissimilar. To tackle this problem, we present a simple framework called optimal one-hop motion transition, which creates quick, natural-looking transitions on the fly without requiring careful manual specifications. The key ideas are (1) to insert a short intermediate motion clip, called a hop, between the source and destination motion clips, and (2) to select such a hop motion clip and its temporal alignment in an optimal way by solving a search problem. In the search problem, our framework tries to balance the naturalness of the resulting transitions and the responsiveness to user input. This search can be precomputed and the results can be stored in a lookup table, making the runtime cost to play an optimal transition negligible. We demonstrate that our framework is easily integrated into a widely used game engine, and that it greatly improves the quality of transitions in practical scenarios.


Introduction
Interactive applications that control 3D characters in real time have become increasingly popular in the contexts of computer games, virtual environments, and even stage performances by virtual singers. For such applications, a popular current practice is to organize a character animation by using a state machine [7,36], in which each state is typically associated with a certain motion clip that should be played when the character is in that state. When a state change occurs at runtime (usually triggered by user input), a motion transition (i.e., crossfading from one motion clip to another, often in two seconds or less) is applied to the character. For this, a  simple pose-space linear blending technique is typically used because of its runtime efficiency. This approach only works well, however, when the source and destination motion clips are sufficiently similar; otherwise, it produces severe visual artifacts, such as footskate from "standing with legs open" to "standing with legs closed" and sudden, unexpected change of momentum.
To avoid such unnatural transitions, current game engines allow game designers to manually specify several parameters, such as the blending duration (i.e., how many frames to use for a transition) and the transition point (i.e., which frame to use for the beginning of a transition), for every possible transition in the state machine [35]. There are several problems, however, in this approach: -When two motion clips are dissimilar, adjusting these parameters is not very helpful; it is necessary to manually insert a state between the two states to play a short motion clip (e.g., a leg-closing motion). This greatly complicates management of the state machine. -As the frame at which the transition is triggered is not predictable, it is not sufficient to define a single fixed transition point for each motion clip. Ideally, the tran- To tackle these problems, we present a practical framework called optimal one-hop motion transition. This framework greatly improves the quality of transitions even when the source and destination motions are dissimilar, as seen in Fig. 1. It also optimizes the responsiveness for every possible triggered frame and still maintains the simplicity of the state machine management. Figure 2 illustrates our framework.
The key idea is twofold: Fig. 3 Conceptual explanation of our one-hop approach. A naïve direct motion transition often produces unacceptable motions during the transition. In contrast, our approach visits a hop, which is chosen so that both the source-to-hop and hop-to-destination transitions are as acceptable as possible 1. First, our framework automatically inserts a short, intermediate motion clip (called a hop) between the source and destination motion clips. That is, it converts a transition into two individual transitions (i.e., source to hop and hop to destination). This one-hop approach has great potential to improve the acceptability of the resulting motion transition as compared to the direct approach. Figure 3 provides an intuition of the reason for this: if we can arrange a hop such that the two individual transitions are both sufficiently natural, then the "path" of the overall transition is likely to be within a manifold of "acceptable motion". 1 2. Second, our framework selects the hop motion clip and its temporal alignment offset in an optimal way by solving a search problem. In the search, the framework considers both the naturalness (i.e., how natural the individual transitions look) and the responsiveness (i.e., how quickly the overall transition finishes) of the resulting transitions and balances the trade-off between these two objectives.
Our framework has several desirable features. First, the search is precomputable; in precomputation, the system searches for optimal transitions for every possible combination of a pair of motion clips and a triggered frame. At runtime, the system dynamically retrieves an optimal transition for a triggered frame. As this requires only negligible computation cost, it is feasible to use the framework in computational resource-restricted applications. The framework is also easily integrated into widely used game engines; we demonstrate this by using Unity. In addition, the framework does not assume either any special annotations to motion clips or any special skeletal structures (e.g., a humanoid).
Our contributions are summarized as follows.
-Design of a framework for optimal one-hop motion transition, which improves the naturalness of transitions while maintaining the ease of control and necessary responsiveness. -Demonstration of the framework's practicality: the search is precomputable, efficient at runtime, and easy to integrate into a popular game engine.

Related work
Motion transition is a primitive problem in interactive character animation, and researchers have worked on this and related topics for decades (e.g., [1,6,9,13,16,23,29,33,37]). Our proposed framework can be seen as a variant of the motion-graph-based approach [1,16,23], in that we consider graphs with a specific structure (i.e., one-hop graphs) and use techniques developed in that context. This section reviews previous approaches from various points of view and clarifies the position of this work.
Motion graphs Motion-graph-based methods have been intensively studied for years [1,9,16,23,34]. One common problem of this approach is that it does not ensure sufficient responsiveness: a sufficiently short path from the source state to the destination state might not exist, and thus, the duration for a transition might be unacceptably long (this problem was clearly described in [13]). In addition, it is difficult to explicitly specify the temporal alignment between the source and destination motion clips. These problems make it difficult to use motion graphs for interactive, precise character control. Our framework, on the other hand, uses a designer-defined state machine for intuitive control logic, and it incorporates responsiveness into the search objective.
High-level motion synthesis Many offline motion synthesizers or online motion controllers have been proposed to animate characters by using high-level constraint specifications (such as semantic tasks to engage, directions or paths to follow, and goal positions to reach) [10,16,20,21,24,27,34]. Even though many such methods have been proposed so far, the state machine approach is still highly popular in interactive application development [7,36], probably because of its simplicity and ease of control. We focus here on a primitive problem in state-machine-based control: the transition between two motion clips.
Motion matching In the game industry, a method called motion matching has recently been developed [5,38]. That method is similar to ours in that it searches for an optimal motion clip and its time alignment in every necessary frame to achieve high responsiveness. It is not designed, however, for creating transitions between two motion clips.
Statistical models Learning a statistical motion model from a captured dataset has been a recent trend [3,10,11,25,28]. While this approach is quite promising, it is not feasible for individual game designers to construct a good statistical model, understand its capability correctly, design game logic based on it, write a script to control it at runtime, and fine tune it if necessary. Thus, the state-machine-based approach still seems more popular in practice than the statistical approach, indicating a large demand for our framework.
Motion blending Motion blending is a technique to create an interpolated motion from multiple motion clips and associated blending weights. In the case of motion transition, motion blending involves two motion clips (i.e., source and destination) and a time-varying weight. Pose-space linear blending has been widely used because of its simplicity and runtime efficiency. To achieve higher quality, researchers have investigated more sophisticated methods [15,30]. Our focus is on how to choose motion clips to blend and align them, and thus, arbitrary motion blending methods can be used.
Motion naturalness Physical criteria are often applied to enforce naturalness on motions, as in space-time optimization [33] and in keyframe motion editing [18]. Another popular approach is to use statistical models (e.g., [3]). In our framework, we need to evaluate the naturalness of a blended motion during a transition. As with previous motion-graphbased methods (e.g., [9,16,37]), we assume that a transition becomes smoother and thus more natural if its source and destination motions are more similar.
Interactive motion transitions Several previous methods specifically focused on interactive motion transitions (e.g., [2,6,13,29]). Among them, the method by Ikemoto et al. [13] is probably the most similar to ours. Their method searches for one-or multi-hop transitions to ensure the naturalness of the resulting motions. One of the most notable differences is in the handling of the duration of the overall transition; while the method of Ikemoto et al. uses a fixed duration for the overall transition (i.e., it always takes the same duration to finish a transition, regardless of whether it is an "easy" transition or not), ours automatically adapts the duration of the overall transition according to its "difficulty". That is, our framework considers not only naturalness but also responsiveness, unlike the previous one. In addition, the framework incorporates the stay duration (i.e., the duration for which a motion clip is played alone before beginning an individual transition) into search variables, which enables it to find even better (i.e., lower-cost) transitions. The way of storing precomputed results also differs between our method and that of Ikemoto et al.; we store per-frame optimal solutions, which is necessary for playing transitions with optimal responsiveness for every possible triggered frame. Note that their work also presented some additional techniques such as clustering of motion segments for performance, time warping of motions, and learning-based evaluation of motion natural-ness. We emphasize here that, although our framework is extensible and able to incorporate most of their additional techniques, for now we have not adopted those techniques to keep our framework lightweight, easy to implement, and intuitive for game developers and designers.

Problem setting and search variables
Our goal is to create a natural-looking transition from a source motion M src to a destination motion M dst . This transition should be responsive: the user triggers it at an arbitrary frame t trigger (e.g., via a gamepad), and the destination motion should then be played as quickly as possible while maintaining naturalness. We assume that a set of n motion clips M = {M 1 , . . . , M n } (including M src and M dst ) is in memory at runtime, so that the clips are available as candidates for hop motion clips. We consider the case in which the temporal alignment between the source and destination motion clips is hardconstrained and cannot be altered by the transition calculation process. Note that satisfying this constraint is necessary for many practical scenarios. For example, in a fighting action game, a character might need to start playing a jump motion clip in response to player input to avoid an opponent's kick; it is not acceptable in a typical game design if the temporal alignment offset of the jump motion clip relative to the triggered frame is altered by the transition algorithm every time. Another example is the case in which a character's movement has to be synchronized with a certain factor (e.g., background music for a dance character) in both the source and destination states.
In precomputation, we search for optimal one-hop transitions for all possible triggered frames. Figure 4 illustrates the problem setting of the search for a certain triggered frame t trigger , which involves the following unknowns:  Among these variables, for simplicity we assume that the blend durations b s→h and b h→d are given; we thus omit them from the search variables. This is because optimizing them is a nontrivial problem. Some advanced techniques can find optimal blend durations (e.g., [37]), but for now we assign them a fixed value of 30 frames (0.5 sec in our implementation, which was selected following [31,33]), for simplicity. As a result, the search variables in our framework are expressed as follows. Let T t be a set of all the possible onehop transitions for a triggered frame t. We represent a onehop transition, T t ∈ T t , by a four-element tuple: Given a target triggered frame t, our framework seeks to find an optimal transition T * t ∈ T t (i.e., the best possible combination of i, o s→h , s s , and s h ) that minimizes the duration necessary for the overall transition while maximizing the overall naturalness; this constitutes a trade-off.

Search for optimal one-hop motion transition
Search objective We solve the following discrete search problem for each possible triggered frame t: where S : T → R ≥0 is a smoothness cost function, R : T → R ≥0 is a responsiveness cost function, and w ∈ R >0 is a weight parameter for the user to control the trade-off between the transition smoothness and responsiveness, depending on the usage scenario. The smoothness cost function is defined as  A and B). A lower value means that the two motions are less distant (i.e., more similar) at the indicated frames, and thus, a transition created under that condition is expected to become smoother. The details of the distance function are described in [16].
To evaluate the smoothness of a one-hop transition, our framework calculates distance values for both (1)  where D s→h and D h→d are distance (or dissimilarity) functions that measure the distances between the source and hop motion clips and the hop and destination motion clips, respectively, during individual transitions. The responsiveness cost function should be a monotonically increasing function with respect to the duration of the overall transition. Our current implementation simply defines it as the sum of the stay durations: Choice of distance function Our current implementation uses a distance function proposed by Kovar et al. [16] which has been used in many follow-up works [6,15,17]. It spatially aligns the two motion fragments to be blended by finding an optimal 2D rigid transformation (i.e., horizontal translation and the yaw rotation) in the least-squares sense, and then it calculates the sum of the distances between corresponding points on the character's body for every pair of frames. This metric is coordinate invariant and implicitly incorporates derivative information by considering multiple frames rather than a single frame. We do not repeat the specific equations here; refer to the original paper for the details. Figure 5 shows an example of computed distance function values for a pair of motion clips. We emphasize that the choice of the distance function is not our focus, and that our framework is orthogonal to that choice. It can use any other distance function, such as those considering joint orientations and velocities [23,37], joint accelerations [1], and so on.
Search strategy We solve the search problem by using a simple exhaustive strategy with pruning. If at least one of three values, D s→h (T t ), D h→d (T t ), and w R(T t ), is larger than the objective value of the "best current" solution, then that T t cannot be the optimal solution (because these three values are all nonnegative), and thus, we can prune that condition without calculating the other values. We calculate w R(T t ) first and then the other two, as w R(T t ) can be more efficiently calculated than the others can. Also, we visit smaller s s and s h first and then increment these values; because R is a monotonically increasing function with respect to both s s and s h , doing so is likely to find lower-cost solutions at earlier stages of the search, which is helpful for effective pruning.
Storage and use of precomputed results Precomputed optimal transitions can be stored in a lookup table in which triggered frames are the keys for retrieval. By using a random-access array to implement the lookup Discussion By selecting the destination motion clip as the hop motion clip and setting o s→h = o s→d and s s = s h = 0, which is included in the search space, our one-hop transition can express the same transition as by the direct approach. Therefore, our framework is always guaranteed to find a transition that is equal to or better than that by the direct approach in terms of the search objective.

Default weight
Though it is important to let users adjust the weight parameter w in Eq. 2, it is helpful to provide a "default" value. We present a simple algorithm to find such a value as follows. First, from the set of target motion clips, we randomly sample N transition conditions, each consisting of source and destination motion clips, their temporal alignment, and a trigger frame. Then, we search for optimal transitions for these conditions without using stay durations (i.e., we set s s = s h = 0) and record the average smoothness cost valueS 0 . Next, we perform the search again but incorporate the stay durations as search variables, with an upper bound s max ∈ Z >0 and with w = 0, and we record the average smoothness cost valuē S s max . Finally, we obtain a default weight as Intuitively, this algorithm measures how much the smoothness cost decreases when using stay durations as compared to when not using them, and then it normalizes the value to find a reasonable relative scale between the smoothness and responsiveness costs. We use 2s max as the denominator, because it is the upper bound of the responsiveness cost when not using stay durations. Another option is to use the average of the responsiveness costs. Either way is valid, because the smoothness and responsiveness costs become comparable through multiplication by the weight. Unless otherwise stated, the results presented in this paper were generated with this default weight automatically set (N = 100, s max = 60).

Implementation details
To demonstrate that our framework is compatible with a popular game engine, we implemented the runtime component in Unity. In particular, we used the Playables API in Unity to blend motion clips. The precomputation module was implemented as an independent executable, which can be run via either a command line or the Unity Editor. As a baseline for comparison, we also implemented the direct approach, which begins a transition immediately from the triggered frame and uses 30 frames to make the transition directly to the destination motion clip. This mimics the common practice.
We tested our framework by using a dance motion dataset that we created using a motion capture system. The dataset consists of various motions from three dance genres: hiphop, jazz, and pop. Each genre has around 20 motion clips, and each clip lasts around 20 seconds. The frame rate was reduced to 60 frames per second in postprocessing. Unless otherwise stated, each result was generated using around 20 motion clips from this dataset.
Note that we did not apply any postprocessing techniques to clean up footskate artifacts (e.g., [12]) for demonstration purposes. Thus, small footskate artifacts that appear in our results can be fixed to improve the naturalness.

Use case: interactive choreography
Assumed scenario As a use case for our framework, we considered a scenario of "interactive character dancing," in which the choreography of a virtual dancer is assembled in real time by an operator who improvises the selection of a prerecorded motion clip to play in the next moment. Figure 6 shows a conceptual example state machine for this application. It requires making the played dance sequence as natural-looking as possible, and at the same time, as responsive to the requests to change the choreography as possible. Fig. 6 Conceptual example of a state machine configuration for an interactive dance application. The choreography is assumed to be created in an improvised manner Visual comparison Refer to the accompanying video, in which we show many transition results produced by our framework and also the baseline approach. Here, we include some of the representative results. Figure 7 shows two cases in which the framework greatly improved the visual quality by choosing appropriate hop motions. Figures 1 and 8 show cases in which the framework successfully cleaned up the footskate artifacts that appeared in the direct transitions.

Robustness test
To check whether our framework can robustly generate more plausible transitions than the baseline approach can for various inputs, we procedurally generated an extra set of 15 transition results by an objective rule (i.e., sequentially selecting triggered frames with a fixed interval, rather than applying subjective selection). The accompanying video includes these 15 transitions. According to our observation, the transitions produced by the framework are better than or at least equivalent to the baseline transitions in most cases.
Mostly unchanged cases When the direct transition is already very smooth (i.e., the smoothness cost of the original direct transition is sufficiently small that there is only a little room for improvement), the search module often selects the destination motion clip as the hop and sets a similar temporal alignment. Figure 9 shows such an example, in which only a slight difference in o s→h and o s→d is introduced, thus giving mostly the same results. For another example, see Result 07 of the robustness test in the accompanying video. Note that, in this situation, the resulting transition looks extremely responsive as if it were a direct (zero-hop) transition, but it can appear more natural than a transition by the naïve direct approach because our framework selects s s and o s→h in an optimal way.
Cost values To better understand the behavior of our framework from a quantitative perspective, we calculated the cost values of both our optimal one-hop transitions (i.e., the summation of D s→h , D h→d , and w R) and the corresponding Fig. 7 Results of direct motion transitions and our optimal one-hop motion transitions for two challenging scenarios. (Top) The transition is triggered when the source motion involves crouching. The direct transition exhibits a severe visual artifact of sudden momentum change. In contrast, our transition inserts a standing-up motion after some stay duration, which makes the overall transition look much more natural.
(Bottom) The source and destination motions are dances that involve standing and sitting, respectively. The direct transition creates a sudden sitting-down motion. In contrast, our transition lets the character sit down while dancing by inserting a dance segment with a sitting-down motion, which is much more natural in terms of choreography (Bottom) Our optimal one-hop motion transition inserts an appropriate hop motion of closing the legs, and the resulting footskate artifact is almost negligible Fig. 9 Example of a case in which the direct (Top) and optimal one-hop (Bottom) approaches produce similar results. In this case, the destination motion clip was selected as the optimal hop motion. This is likely to happen when the direct motion transition is already very smooth Fig. 10 Cost value comparison of our optimal one-hop motion transitions and the corresponding naïve direct transitions direct transitions (i.e., the distance between the source and destination motion clips during a direct transition, in other words, D s→d ). Figure 10 displays the results in a side-by-side manner. The transitions generated for the robustness test were used here; see the accompanying video for the corresponding rendered motions. The figure shows that our framework could always find lower-cost transitions than those produced by the direct approach, and that our results have various proportions of individual cost values to total cost values.

Effect of changing weight
To demonstrate the effect of the weight parameter w, we generated transition results by using different weights: 0.1 · w default , w default , and 10 · w default . Figure 11 shows timelapse visualizations of these results. Although the source and destination motion clips, their temporal alignment, and the triggered frame were identical, different optimal one-hop transitions were obtained depending on the weights. This demonstrates that the weight controls a trade-off between smoothness and responsiveness: our transition becomes more responsive when using a larger weight, while it becomes smoother when using a smaller weight. Note that even when the largest weight (i.e., 10 · w default ) was used, it provided a much smaller smoothness cost (0.0467) than the direct transition did (0.0984), owing to the insertion of a hop motion.

Extensibility
One of the advantages of our framework is its simplicity, which makes it easy to investigate various extensions. To demonstrate its extensibility, we created a beat-aware version of the one-hop transition search module for interactive dancing applications. In this extension, hop dance motions are selected and aligned by taking their beats into consideration. This is easily achieved by restricting the search space of the temporal alignment offset o s→h to only beat frames. Figure 12 shows a result generated by this extension. As the source, hop, and destination motions share the same beats in this case, the resulting motions appear well synchronized to the underlying music.

Discussion
Multiple hops The number of inserted hops is always one in our framework. We adopted this design because it is a minimal insertion but greatly improves the quality. Being minimal is important to provide better transparency for designers as well as better responsiveness of transitions. Nevertheless, it will be an important future work to investigate the approach of inserting multiple motion clips (e.g., [13]) to obtain even smoother transitions. Note that it is possible to search multiple hops in our framework with a straightforward extension, but this prohibitively increases the computational cost of the search; therefore, we did not include that approach as a baseline in the evaluation, and some techniques need to be developed to make it tractable.
Higher responsiveness As shown in Fig. 9, when the destination motion clip is selected as the hop motion clip and the temporal alignments o s→h and o s→d are similar, the resulting transition can look very responsive. For users who desire Fig. 11 Visualizations of a direct motion transition (first row) and our optimal one-hop motion transitions with various weights (the other rows) under the same conditions. The weight controls a trade-off between smoothness and responsiveness: our transition becomes more responsive when using a larger weight, while it becomes smoother when using a smaller weight Fig. 12 Result of a beat-aware optimal one-hop dance motion transition. Our extended framework inserted a hop motion so that it shared the same beats as the source and destination dance motion clips. Thus, the resulting transition was well synchronized to the underlying music very quick transitions, it would be useful to provide an option to enforce (or favor) this condition in the search.
Blending duration We used a fixed blending duration to maintain the simplicity of our framework, but making this variable adaptive [37] would be beneficial to improving both the naturalness and the responsiveness. Thus, we suggest that developers of motion control systems pursue that direction if they require increased quality.
Separate handling of body parts It would be an interesting future work to investigate how to apply one-hop transitions in a situation with some body parts (e.g., the upper and lower bodies) separately controlled. It is straightforward to independently precompute optimal one-hop transitions for each body part and play them at runtime; however, it is not trivial to determine how that approach would affect the naturalness of transitions.
Efficient search strategy Our current implementation uses a simple exhaustive search to obtain optimal solutions in precomputation. Our (unoptimized) code typically takes a 36-core server about one hour to perform the search for around 1000 possible triggered frames (depending on the total length of the motion clips to be used). If necessary, using a heuristic search algorithm such as beam search could reduce the precomputation cost. It would also be interesting to seek efficient algorithms that use the found solution for a triggered frame to obtain the solution of the next frame, because optimal solutions are often similar to those of their neighboring frames. This idea could also be used for compressing the lookup table to reduce the runtime memory usage.
Positional and orientational constraints We do not yet incorporate positional or orientational constraints in the search (i.e., searching for an optimal one-hop transition that results in a certain amount of translation and rotation), which are necessary for certain use cases. This would require some extensions to the objective of the search, as well as a way of managing the lookup table.
Interpolated motions We assumed a scenario in which every state is associated with a single motion clip to play. It is also a common practice, however, to associate some states with parametric motions defined as continuous interpolations of multiple motion clips. This approach is used for dynamically generating motion variations; for example, interpolating running and walking motion clips generates intermediate-speed walking motions. Also, time warping techniques can be combined to create further variations. We have not yet considered this scenario. It would thus be a good future work to further improve the practicality of our framework by handling dynamically interpolated motions.
Creation of dedicated motion datasets To demonstrate our framework, we used an existing dataset of dance motions for hop motion candidates. It would be an interesting future work to create motion datasets dedicated to such use for hop motions. An ideal dataset could improve our framework in providing more natural transitions (even for transitions between totally dissimilar motions such as from sleeping to running), providing quicker transitions, and reducing the runtime memory usage.

Connection of nonoverlapping motions
Our framework can also be used for connecting two nonoverlapping motion clips (i.e., connecting the last frame of one clip and the first frame of another). This situation often arises (e.g., [1,32]), and is typically solved by smoothing the naïvely connected motion with a certain window duration. Rather than smoothing, our framework connects the two nonoverlapping motions by inserting an appropriate hop motion.
Reason for precomputing every frame Motion-graph-based methods (e.g., [1,16,23]) first create a graph structure only once and then search "paths" in the graph by considering user-specified constraints to synthesize motions. In contrast, we compute optimal one-hop transitions (one-hop graphs) for every possible triggered frame. This is necessary because the strategy of being as responsive as possible means that every frame can produce a different optimal one-hop transition.
More sophisticated metrics for motion transition Our current implementation uses the distance metric used by Kovar et al. [16] to measure and ensure the smoothness of transitions. This metric, however, only considers the pose-space geometric distances between motion segments and does not consider either the semantics or styles of motions. Thus, it may potentially cause insertion of a perceptually awkward hop motion. Measurement of such motion compatibility related to visual perception could be enabled by a data-driven (or machinelearning) approach with crowdsourced data generation, as researchers have recently demonstrated the effectiveness of that approach in various domains [4,8,19,22,26].
Ease of extension Our framework is simple enough to easily be extended according to specific usage scenarios. We demonstrated an extension of our framework in the previous section (see Fig. 12), in which we could make the search module aware of musical beats by simply modifying the search space. Similarly, we could offer another extension of the search module as follows. As our dataset has annotations of dance genres (i.e., hip-hop, jazz, and pop), we could create a genre-aware version of the search module for interactive dancing applications. This could be achieved by, for example, adding a genre cost term to the search objective in Eq. 2: where c ∈ R >0 is a constant value to control the genre term's strength. In this way, the search module could favor hop motions from a target genre (e.g., the genre of the source and destination motions), but it could also choose a hop motion from different genres when necessary to ensure sufficient smoothness. Hence, we can extend the search to favor solutions that are more context appropriate.
Applications to other domains We believe that the design of our optimal one-hop transition framework is applicable not only to character motion but also to other domains. For example, "interactive music" [14] is a technique to make the transitions of background music in games naturally responsive to game contexts. Inserting an optimal hop (or fill) would potentially create quicker, more natural transitions for that technique.