Abstract
With shipbuilding engineering structural optimization and energy saving in the direction of development, metal welding structure gets more and more application in engineering, metal welding structure of the welding deformation problems can become a hot research topic in the field of welding and the general character, how to implement effective for accurate detection of welding deformation and control, become an important research direction. This paper tried to analyze the research on detection of welding deformation in different sensory technology. The results shown that they could get good result in different application environment for different sensing technology. The non-contact detection could get more intelligent and more accuracy and the contact detection are more reliable and widely used in industrial. However, according to automation and intelligent requirement of modern industrial, it is the trend to develop more non-contact detection method in shipbuilding processing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Brown S, Song H (1992) Finite element simulation of welding of large structures. J Eng Ind Trans ASME 114(4):441–445
Chen SB, Lv N (2014) Research evolution on intelligentized technologies for arc welding process. J Manuf Process 16(1):109–122
Lindgren LE (2001) Finite element modeling and simulation of welding part 3: efficiency and integration. J Therm Stresses 24(2):141–192
Song HS, Zhang YM (2007) Image processing for measurement of three-dimensional GTA weld pool surface. Weld J NY 86(10):323
Papazoglou VJ, Masubuchi K (1978) Analysis and control of distortion in welded aluminum structures. Weld J 57(9):251s–262s
Fan CJ, Lv FL, Chen SB (2009) Visual sensing and penetration control in aluminum alloy pulsed GTA welding. Int J Adv Manuf Technol 42:126–137
Deng DA (2009) FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Mater Des 30(2):359–366
Markovits T, Takacs J, Szilagyi A et al (2008) Real-time monitoring of the laser bending process. Int J Microstruct Mater Prop 3(1):141–149
Xu G, Song S, Lv Y (2004) A new intelligent displacement temperature measurement system is presented. Ind Control Comput 02:44–46
Li H, Zhang Y (2002) A high accuracy multi-point transient temperature measurement system. J Nanchang Univ 26(2):191–194
Wang XF, Takacsb J, Krallicsb G et al (2002) Research on the thermos-physical process of laser bending. J Mater Process Technol 127(3):388–391
Chen X, Li Z, Liu K et al (2009) An online contour measurement and locating compensation method of the carriage roof for high-speed railway combining laser and vision. In: The 14th International symposium on measurement technology and intelligent instruments. Niigata, 2 September 2019
Reeves M, Moore AJ, Hand DP et al (2003) Dynamic shape measurement system for laser materials processing. Soc Photo—Opt Instrum Eng 42(10):2923–2929
Selami Y, Lv N, Tao W, Yang H, Zhao H (2020) Optimizing laser triangulation displacement sensor of 3D positioning and posture using coa based bpnn. Sens Rev
Gao X, Zhou X, Li Y (2019) Application of magneto-optical imaging magnetic flux leakage characteristics in the reconstruction of welding defects. Opt Precision Eng 27(8)
Camilleir D, Mollieone P, Gray TGF (2007) Computational methods and experimental validation of welding distortion models. Proc Inst Mech Eng, Part I: J Mater Des Appl 221(4):235–249
Camilleir D, Gary TGF (2005) Computationally efficient welding distortion simulation techniques. Model Simul Mater Sci Eng 13(8):1365–1382
Shiari H, Urushizaki M, Sawamoto S et al (2004) Analysis of bending deformation behavior during circumferential welding of cylindrical parts: study of deformation behavior at micron to sub-micron level of laser-welded automotive parts. Weld Int 18(8):626–634
Wang R, Liang Z, Zhang J (2008) Experiment investigation on out-of-plan distortion of aluminium alloy 5A12 in TIG welding. Rare Metal Mater Eng 37(2):1264–1269
Wang R, Liang Z, Zhang J (2008) Dynamic process of angular distortion between aluminum and titanium alloys with TIG welding. Trans Nonferrous Metals Soc China 18(2):233–239
Liu C, Wang R, Zhang J (2007) Dynamic process test and numerical analysis of weld bead deformation. J Xi’an Jiaotong Univ 18(2):233–239
Liu C, Zhang JX (2009) Numerical simulation of transient welding angular distortion with external restraints [J]. Sci Technol Weld Joining 14(1):26–31
Xue B (2009). Study on dynamic deformation of full position TIG welding of stainless steel pipe with back wall. Xi’an Jiaotong University
Wang Q, Zhu Y, Mei Y, Zhou B (2020) Application of a high accuracy detection system in welding deformation of closured weld joint. Power Gener Air-Conditioning S1:12–14
Qiao G, Wu Q, Shao Y (1986) Study on predeformation process. J Aviat 4:5–10
Qiao G (1979) Welding stress and deformation of titanium alloy thin-walled member. J Aviat 2:5–10
Guan Q, Zhang CX (1994) Dynamic control of welding distortion by moving spot heat sink. Weld World 33(4):309–313
Shao X (2004) Control measures for welding deformation of low-pressure cylinder in Huaneng Yuhuan power plant. J Mech Eng 40(8):87–90
Schenk T, Richardson IM, Kraska M et al (2009) A study on the influence of clamping on welding distortion. Comput Mater Sci 45(4):999–1005
Acknowledgements
This work was supported by the National Natural Science Foundation of China (No. 51969001), the Guangxi Natural Science Foundation of China (No. 2018GXNSFAA138080; No. 2016GXNSFAA380188), the Guangxi Major Science and Technology Projects of China (No. GuikeAA17292003), and Innovation Project of Guangxi Graduate Education (No. YCBZ2019050), and the Guangxi Science and Technology Base and Talent Project of China (No. GuikeAD18281007)
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Jiao, Z., Feng, Z., Han, J., Huang, W. (2021). Research on Welding Transient Deformation Monitoring Technology Based on Non-contact Sensor Technology. In: Chen, S., Zhang, Y., Feng, Z. (eds) Transactions on Intelligent Welding Manufacturing. Transactions on Intelligent Welding Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-33-6502-5_9
Download citation
DOI: https://doi.org/10.1007/978-981-33-6502-5_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-6501-8
Online ISBN: 978-981-33-6502-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)