Abstract
Epoxy resin is a widely used matrix materials for making composite materials. Natural as well as synthetic fibers are extensively used in composites. The use of synthetic fibers can be reduced by using natural fibers along with synthetic fibers. Natural fibers like hemp, flax, kenaf, jute, etc. have been used in conjunction with synthetic fibers like glass, Kevlar, and carbon. The ultimate properties are dependent of many parameters. The type of fibers, ratio of natural to synthetic fiber, the weaving and stacking pattern, fiber ply arrangement, etc. are some of the important factors governing the properties of the hybrid composites. This chapter outlines the mechanical properties and morphology of various natural/synthetic hybrid fiber composites with epoxy resin as the matrix material.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReference
H.P.S. Abdul Khalil, S. Hanida, C.W. Kang, N.A. Nik Fuaad, Agro-hybrid composite: The effects on mechanical and physical properties of oil palm fiber (efb)/glass hybrid reinforced polyester composites. J. Reinf. Plast. Compos. 26, 203–218 (2007). https://doi.org/10.1177/0731684407070027
M.R. Abhishek, P.M. Suresh, S.H.S. Murthy, Evaluation of mechanical properties of jute/E-glass epoxy hybrid composites by varying fiber loading with and without shear thickening fluid. Mater. Today: Proc. 4, 10858–10862 (2017). https://doi.org/10.1016/j.matpr.2017.08.039
E. Ahci, R. Talreja, Characterization of viscoelasticity and damage in high temperature polymer matrix composites. Compos. Sci. Technol. 66, 2506–2519 (2006). https://doi.org/10.1016/j.compscitech.2006.02.012
Z. Al-Hajaj, B.L. Sy, H. Bougherara, R. Zdero, Impact properties of a new hybrid composite material made from woven carbon fibres plus flax fibres in an epoxy matrix. Compos. Struct. 208, 346–356 (2019). https://doi.org/10.1016/j.compstruct.2018.10.033
M.B. Ameur, A. El Mahi, J.L. Rebiere, I. Gimenez, M. Beyaoui, M. Abdennadher, M. Haddar, Investigation and identification of damage mechanisms of unidirectional carbon/flax hybrid composites using acoustic emission. Eng. Fract. Mech. 216, 106511 (2019). https://doi.org/10.1016/j.engfracmech.2019.106511
K.P. Ashik, R.S. Sharma, A review on mechanical properties of natural fiber reinforced hybrid polymer composites. J. Miner. Mater. Charact. Eng. 3, 420–426 (2015). https://doi.org/10.4236/jmmce.2015.35044
S. Ashworth, J. Rongong, P. Wilson, J. Meredith, Mechanical and damping properties of resin transfer moulded jute-carbon hybrid composites. Compos. B 105, 60–66 (2016). https://doi.org/10.1016/j.compositesb.2016.08.019
O.M.L. Asumani, R.G. Reid, R. Paskaramoorthy, The effects of alkali–silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites. Compos. Part A Appl. Sci. Manuf. 43, 1431–1440 (2012). https://doi.org/10.1016/j.compositesa.2012.04.007
M.A. Attia, M.A.A. El-baky, A.E. Alshorbagy, Mechanical performance of intraply and inter-intraply hybrid composites based on e-glass and polypropylene unidirectional fibers. J. Compos. Mater. 51, 381–394 (2017). https://doi.org/10.1177/0021998316644972
C. Audibert, A.S. Andreani, E. Lainé, J.C. Grandidier, Mechanical characterization and damage mechanism of a new flax-Kevlar hybrid/epoxy composite. Compos. Struct. 195, 126–135 (2018). https://doi.org/10.1016/j.compstruct.2018.04.061
P.K. Bajpai, K. Ram, L.K. Gahlot, V.K. Jha, Fabrication of glass/jute/epoxy composite based industrial safety helmet. Mater. Today: Proc. 5, 8699–8706 (2018). https://doi.org/10.1016/j.matpr.2017.12.296
R. Bhanupratap, Impact damage resistance of Jute/Kevlar hybrid composite laminates subjected to varying heights: An experimental approach. Mater. Today: Proc. 39, 1396–1401 (2020). https://doi.org/10.1016/j.matpr.2020.04.873
R.A. Braga, P.A.A. Magalhaes Jr., Analysis of the mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites. Mater. Sci. Eng. C 56, 269–273 (2015). https://doi.org/10.1016/j.msec.2015.06.031
L. Calabrese, V. Fiore, P. Bruzzaniti, T. Scalici, A. Valenza, Pinned hybrid glass-flax composite laminates aged in salt-fog environment: Mechanical durability. Polymers 12, 40 (2020). https://doi.org/10.3390/polym12010040
C. Cerbu, H. Wang, M.F. Botis, Z. Huang, C. Plescan, Temperature effects on the mechanical properties of hybrid composites reinforced with vegetable and glass fibers. Mech. Mater. 149, 103538 (2020). https://doi.org/10.1016/j.mechmat.2020.103538
M. Cihan, A.J. Sobey, J.I.R. Blake, Mechanical and dynamic performance of woven flax/E-glass hybrid composites. Compos. Sci. Technol. 172, 36–42 (2019). https://doi.org/10.1016/j.compscitech.2018.12.030
D. De Fazio, S. Cuomo, L. Boccarusso, F. Pinto, M. Durante, M. Meo, Design and characterization of hybrid hemp/carbon laminates with improved impact resistance. Mater. Today: Proc. 34, 194–201 (2021). https://doi.org/10.1016/j.matpr.2020.02.732
H.N. Dhakal, M. Sain, Enhancement of mechanical properties of flax-epoxy composite with carbon fibre hybridisation for lightweight applications. Materials 13, 109 (2020). https://doi.org/10.3390/ma13010109
H.N. Dhakal, Z.Y. Zhang, R. Guthrie, J. MacMullen, N. Bennett, Development of flax/carbon fibre hybrid composites for enhanced properties. Carbohydr. Polym. 96, 1–8 (2013). https://doi.org/10.1016/j.carbpol.2013.03.074
V. Fiore, L. Calabrese, T. Scalici, P. Bruzzaniti, A. Valenza, Bearing strength and failure behavior of pinned hybrid glass-flax composite laminates. Polym. Test. 69, 310–319 (2018). https://doi.org/10.1016/j.polymertesting.2018.04.041
R. Giridharan, Preparation and property evaluation of glass/ramie fibers reinforced epoxy hybrid composites. Compos. Part B Eng. 167, 342–345 (2019). https://doi.org/10.1016/j.compositesb.2018.12.049
R. Gujjala, S. Ojha, S.K. Acharya, S.K. Pal, Mechanical properties of woven jute–glass hybrid-reinforced epoxy composite. J. Compos. Mater. 48, 3445–3455 (2014). https://doi.org/10.1177/0021998313501924
M.F. Ismaila, T.H. Mohamed, M.T.H. Sultana, A. Hamdana, A.U.M. Shaha, M. Jawaid, Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios. J. Mater. Res. Technol. 8, 2662–2673 (2019). https://doi.org/10.1016/j.jmrt.2019.04.005
M. Jawaid, H.P.S. Abdul Khalil, A. Hassan, R. Dungani, A. Hadiyane, Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites. Compos. Part B Eng. 45, 619–624 (2013). https://doi.org/10.1016/j.compositesb.2012.04.068
K. Jha, B.B. Samantaray, P. Tamrakar, A study on erosion and mechanical behavior of jute/E-glass hybrid composite. Mater. Today: Proc. 5, 5601–5607 (2018). https://doi.org/10.1016/j.matpr.2017.12.151
P. Karthick, A.A.E. Andrews, G. Srinath, N. Tejesh, K.A. Reddy, V.N.U. Rao, Persuade of sodium hydrate and potassium permanganate treated sisal/textile-grade glass fibers hybrid composite. Mater. Today: Proc. 33, 2818–2821 (2020). https://doi.org/10.1016/j.matpr.2020.02.702
G.H. Kumar, H. Babuvishwanath, R. Purohit, P. Sahu, R.S. Rana, Investigations on mechanical properties of glass and sugarcane fiber polymer matrix composites. Mater. Today: Proc. 4, 5408–5420 (2017). https://doi.org/10.1016/j.matpr.2017.05.052
C.C. Kun, C.Y. Liang, Ballistic-proof effects of various woven constructions. Fibers Text. East. Eur. 18, 63–67 (2010)
U. Kureemun, M. Ravandi, L.Q.N. Tran, W.S. Teo, T.E. Tay, H.P. Lee, Effects of hybridization and hybrid fibre dispersion on the mechanical properties of woven flax-carbon epoxy at low carbon fibre volume fractions. Compos. Part B 134, 28–38 (2018). https://doi.org/10.1016/j.compositesb.2017.09.035
S.S. Latif, S. Nahar, M. Hasan, Fabrication and electrical characterization of bamboo fiber-reinforced polypropylene composite. J. Reinf. Plast. Compos. 34, 187–195 (2014). https://doi.org/10.1177/0731684414565941
A. Le Duigou, P. Davies, C. Baley, Interfacial bonding of flax fiber/poly(L-lactide) bio-composites. Compos. Sci. Technol. 70, 231–239 (2010). https://doi.org/10.1016/j.compscitech.2009.10.009
H.P. Lee, U. Kureemun, M. Ravandi, W.S. Teo, Performance of interlaminar flax-carbon hybrids under bending. Procedia. Manufact. 43, 658–665 (2020)
W. Machnowski, B. Gutarowski, J. Perkowski, H. Wrzosek, Effects of gamma radiation on the mechanical properties of and susceptibility to biodegradation of natural fibers. Text. Res. J. 83, 44–55 (2012). https://doi.org/10.1177/0040517512449045
U. Magarajan, S.D. Kumar, D. Arvind, N. Kannan, P. Hemanandan, A comparative study on the static mechanical properties of glass fiber vs glass-jute fiber polymer. Compos. Mater. Today: Proc. 5, 6711–6716 (2018). https://doi.org/10.1016/j.matpr.2017.11.328
S.M. Maharana, P. Samal, J. Dehury, P.P. Mohanty, Effect of fiber content and orientation on mechanical properties of epoxy composites reinforced with jute and kevlar. Mater. Today: Proc. 26, 273–277 (2020). https://doi.org/10.1016/j.matpr.2019.11.239
M. Mittal, R. Chaudhary, Development of PALF/glass and coir/glass fiber reinforced hybrid epoxy composites. J. Mater. Sci. Surf. Eng. 6, 851–861 (2018) https://doi.org/10.jmsse/2348-8956/6-5.1
C. Nagaraj, D. Mishra, J.D.P. Reddy, Estimation of tensile properties of fabricated multi layered natural jute fiber reinforced E-glass composite material. Mater. Today: Proc. 27, 1443–1448 (2020). https://doi.org/10.1016/j.matpr.2020.02.864
J. Naveen, M. Jawaid, E.S. Zainudina, M.T.H. Sultan, R. Yahaya, Mechanical and moisture diffusion behaviour of hybrid kevlar/cocos nucifera sheath reinforced epoxy composites. J. Mater. Res. Technol. 8, 1308–1318 (2019). https://doi.org/10.1016/j.jmrt.2018.07.023
W. Ouarhim, H. Essabir, M.O. Bensalah, N. Zari, R. Bouhfid, A.E.K. Qaiss, Structural laminated hybrid composites based on raffia and glass fibers: Effect of alkali treatment, mechanical and thermal properties. Compos. Part B Eng. 154, 128–137 (2018). https://doi.org/10.1016/j.compositesb.2018.08.004
W. Ouarhim, H. Essabir, M.O. Bensalah, D. Rodrigue, R. Bouhfid, A.E. Qaiss, Hybrid composites and intra-ply hybrid composites based on jute and glass fibers: A comparative study on moisture absorption and mechanical properties. Mater. Today Commun. 22, 100861 (2020). https://doi.org/10.1016/j.mtcomm.2019.100861
T. Peijs, E.A.M. Smets, L.E. Govaert, Strain rate and temperature effects on energy absorption of polyethylene fibres and composites. Appl. Compos. Mater. 1, 35–54 (1994). https://doi.org/10.1007/BF00567210
F. Pinto, L. Boccarusso, D. De Fazio, S. Cuomo, M. Durante, M. Meo, Carbon/hemp bio-hybrid composites: Effects of the stacking sequence on flexural, damping and impact properties. Compos. Struct. 242, 112148 (2020). https://doi.org/10.1016/j.compstruct.2020.112148
M. Rafiquzzaman, M.M. Islam, M.H. Rahman, M.S. Talukdar, M.N. Hasan, Mechanical property evaluation of glass–jute fiber reinforced polymer composites. Polym. Adv. Technol. 27, 1308–1316 (2016). https://doi.org/10.1002/pat.3798
S. Rajesh, B. Vijayaramnath, C. Elanchezhian, S. Vivek, M.H. Prasadh, M. Kesavan, Experimental investigation of tensile and impact behavior of aramid-natural fiber composite. Mater. Today: Proc. 16(2019), 699–705 (2019). https://doi.org/10.1016/j.matpr.2019.05.148
K. Raju, M. Balakrishnan, Evaluation of mechanical properties of palm fiber/glass fiber and epoxy combined hybrid composite laminates. Mater. Today: Proc. 21, 52–55 (2020). https://doi.org/10.1016/j.matpr.2019.05.359
M. Ramasamy, A.R. Daniel, M. Nithya, S.S. Kumar, R. Pugazhenthi, Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber. Mater. Today: Proc. 37, 1699–1705 (2021). https://doi.org/10.1016/j.matpr.2020.07.243
R.S. Rana, A. Ashish Kumre, S. Rana, R. Purohit, Characterization of properties of epoxy sisal/glass fiber reinforced hybrid composite. Mater. Today: Proc. 4, 5445–5451 (2017). https://doi.org/10.1016/j.matpr.2017.05.056
M.J.M. Ridzuan, M.S. Abdul Majid, A. Khasri, K.S. Basaruddin, A.G. Gibson, Effect of moisture exposure and elevated temperatures on impact response of Pennisetum purpureum/glass reinforced epoxy (PGRE) hybrid composites. Compos. Part B Eng. 160, 84–93 (2018). https://doi.org/10.1016/j.compositesb.2018.10.029
S.N.A. Safri, M.T.H. Sultan, N. Saba, M. Jawaid, Effect of benzoyl treatment on flexural and compressive properties of sugar palm/glass fibers/epoxy hybrid composites. Polym. Test. 71, 362–369 (2018). https://doi.org/10.1016/j.polymertesting.2018.09.017
S.N.A. Safri, M.T.H. Sultan, M. Jawaid, M.S.A. Majid, Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites. Compos. Struct. 226, 111308 (2019). https://doi.org/10.1016/j.compstruct.2019.111308
E.H. Saidane, D. Scida, M. Assarar, H. Sabhi, R. Ayad, Hybridisation effect on diffusion kinetic and tensile mechanical behaviour of epoxy based flax–glass composites. Compos. Part A 87, 153–160 (2016). https://doi.org/10.1016/j.compositesa.2016.04.023
E.H. Saidane, D. Scida, M. Assarar, R. Ayad, Damage mechanisms assessment of hybrid flax-glass fiber composites using acoustic emission. Compos. Struct. 174, 1–11 (2017). https://doi.org/10.1016/j.compstruct.2017.04.044
E.H. Saidane, D. Scida, M.J. Paca, R. Ayadb, Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fiber woven composites: Failure mechanism evaluation using acoustic emission analysis. Polym. Test. 75, 246–253 (2019). https://doi.org/10.1016/j.polymertesting.2019.02.022
S. Samanta, M. Muralidhar, T.J. Singh, S. Sarkar, Characterization of mechanical properties of hybrid bamboo/GFRP and jute/GFRP composites. Mater. Today: Proc. 2, 1398–1405 (2015). https://doi.org/10.1016/j.matpr.2015.07.059
F. Sarasini, J. Tirillo, S. D’Altilia, T. Valente, C. Santulli, F. Touchard, L.C. Arnault, D. Mellier, L. Lampani, P. Gaudenzi, Damage tolerance of carbon/flax hybrid composites subjected to low velocity impact. Compos. B 91, 144–153 (2016). https://doi.org/10.1016/j.compositesb.2016.01.050
G. Saravanan, G.B. Bhaskar, E. Kaviyarasan, B. Naveen, S. Prabakaran, S. Rajesh, Experimental investigation of mechanical behavior of bauhinia racemosa – Based glass fiber reinforced composite. Mater. Today: Proc. 16, 758–765 (2019). https://doi.org/10.1016/j.matpr.2019.05.156
A. Sarwar, Z. Mahboob, R. Zdero, H. Bougherara, Mechanical characterization of a new Kevlar/Flax/epoxy hybrid composite in a sandwich structure. Polym. Test. 90, 106680 (2020). https://doi.org/10.1016/j.polymertesting.2020.106680
D. Sivakumar, L.F. Ng, N.F.M. Zalani, M.Z. Selamat, A.F.A. Ghani, S.H.S.M. Fadzullah, Influence of kenaf fabric on the tensile performance of environmentally sustainable fibre metal laminates. Alex. Eng. J. 57, 4003–4008 (2018). https://doi.org/10.1016/j.aej.2018.02.010
M.A.S. Sujon, M.A. Habib, M.Z. Abedin, Experimental investigation of the mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites. J. Mater. Res. Technol. 9, 10970–10981 (2020). https://doi.org/10.1016/j.jmrt.2020.07.079
M.T.H. Sultana, M. Jawaid, S.N.A. Safri, A.U.M. Shah, M.R. Yusof, J. Naveen, S. Mohd, K.A.M. Salleh, N. Saba, Effects of layering sequence and gamma radiation on mechanical properties and morphology of Kevlar/oil palm EFB/epoxy hybrid composites. J. Mater. Res. Technol. 8, 5362–5373 (2019). https://doi.org/10.1016/j.jmrt.2019.09.003
A.B.M. Supian, S.M. Sapuan, M.Y.M. Zuhri, E.S. Zainudin, H.H. Ya, Crashworthiness performance of hybrid kenaf/glass fiber reinforced epoxy tube on winding orientation effect under quasi-static compression load. Def. Technol. 16, 1051–1061 (2020). https://doi.org/10.1016/j.dt.2019.11.012
Y. Swolfs, L. Gorbatikh, I. Verpoest, Fiber hybridisation in polymer composites: A review. Compos. Part A Appl. Sci. Manuf. 67, 181–200 (2014). https://doi.org/10.1016/j.compositesa.2014.08.027
K. Vinoth, M.N.M. Ansari, S. Begum, Z. Yahya, A. Atiqah, Effect of fiber loading on tensile strength of kenaf/glass fiber epoxy hybrid composite for insulator application. Mater. Today: Proc. 29, 123–126 (2020). https://doi.org/10.1016/j.matpr.2020.05.684
H. Wang, L. Yang, H. Wu, Study on mechanical and thermomechanical properties of flax/glass fiber hybrid-reinforced epoxy composites. Polym. Compos. 42, 714–723 (2020). https://doi.org/10.1002/pc.25860
R. Yahaya, S.M. Sapuan, M. Jawaid, Z. Leman, E.S. Zainudin, Mechanical performance of woven kenaf-Kevlar hybrid composites. J. Reinf. Plast. Compos. 33, 2242–2254 (2014). https://doi.org/10.1177/0731684414559864
R. Yahaya, S.M. Sapuan, M. Jawaid, Z. Leman, E.S. Zainudin, Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites. Mater. Des. 67, 173–179 (2015a). https://doi.org/10.1016/j.matdes.2014.11.024
R. Yahaya, S.M. Sapuan, M. Jawaid, Z. Leman, E.S. Zainudin, Effects of kenaf contents and fiber orientation on physical, mechanical, and morphological properties of hybrid laminated composites for vehicle spall liners. Polym. Compos. 36, 1469–14786 (2015b). https://doi.org/10.1002/pc.23053
R. Yahaya, S.M. Sapuan, M. Jawaid, Z. Leman, E.S. Zainudin, Effect of fiber orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application. Defe. Technol. 12, 52–58 (2016). https://doi.org/10.1016/j.dt.2015.08.005
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Francis, B. (2022). Morphology and Mechanical Properties of Epoxy/Synthetic/Natural Fiber Composites. In: Mavinkere Rangappa, S., Parameswaranpillai, J., Siengchin, S., Thomas, S. (eds) Handbook of Epoxy/Fiber Composites . Springer, Singapore. https://doi.org/10.1007/978-981-19-3603-6_39
Download citation
DOI: https://doi.org/10.1007/978-981-19-3603-6_39
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-3602-9
Online ISBN: 978-981-19-3603-6
eBook Packages: Chemistry and Materials ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics