Abstract
Recently rotary energy harvester, which can replace traditional batteries to power small electronic devices in the rotary system has been proposed. However, most of the proposed rotary energy harvesters are only can be installed concentrically in rotary system, cannot work in the need of eccentric installation. This paper presents a novel electromagnetic energy harvester that can be used in a rotary system where the energy harvester is required to be installed eccentrically. The rotation mechanical energy is converted into electrical energy through a structure of a cylindrical shell, a magnetic ball and coil, which is based on the principle of electromagnetic induction. A protype of proposed energy harvester and corresponding measurement setup has been built for concept verification. The performance of the proposed energy harvester including open-circuit voltage and output power for resistive load have been preliminarily studied at different rotational speed, eccentric distance and diameter of the magnetic ball. The results reveal that the proposed energy harvester is very promising in the application of self-powered system which requires to be installed eccentrically in rotary system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Babayo AA, Anisi MH, Ali I (2017) A review on energy management schemes in energy harvesting wireless sensor networks. Renew Sustain Energ Rev 76:1176–1184
Yick J, Mukherjee B, Ghosal D (2008) Wireless sensor network survey. Comput Netw 52(12):2292–2330
Zhang J, Wang P, Ning Y, Zhao W, Zhang X (2020) Modeling and experiment characterization of a piezoelectric energy harvester with a wind concentrator structure. Arab J Sci Eng 45:9793–9802. https://doi.org/10.1007/s13369-020-04953-1
Hong SK, Yang CH, Jabbar H, Woo MS, Song D, Sung TH (2015) Design of piezoelectric energy harvester with additional springs for varying stiffness of module. J Electroceram 35(1):11–18. https://doi.org/10.1007/s10832-015-9986-9
Praveen Kumar D, Amgoth T, Annavarapu CSR (2019) Machine learning algorithms for wireless sensor networks: A survey. Inf Fusion 49:1–25
Fang KQ, Zhang Y, Tang L, Qu H (2019) A string-driven rotor for efficient energy harvesting from ultra-low frequency excitations. Appl Phys Lett 115:203903
Tian YW, Li GM, Yi ZR, Liu JQ, Yang B (2018) A low-frequency MEMS piezoelectric energy harvester with a rectangular hole based on bulk PZT film. Phys Chem Solids 117:21–27
Zhou N, Zhang Y, Bowen CR, Cao JY (2020) A stacked electromagnetic energy harvester with frequency up-conversion for swing motion. Appl Phys Lett 117:163904
Narolia T, Gupta VK, Parinoy I (2020) Design and experimental study of rotary-type energy harvester. Intell Mater Syst Struct 31:1–10
Ju S, Ji CH (2018) Impact-based piezoelectric vibration energy harvester. Appl Energy 214:139–151
Zhang YL, Luo AX, Wang YF, Dai XT, Lu Y, Wang F (2020) Rotational electromagnetic energy harvester for human motion application at low frequency. Appl Phys Lett 116:053902
Yang WX, Wang YQ, Li YK, Wang JL, Cheng TH, Wang ZL (2019) Integrated flywheel and spiral spring triboelectric nanogenerator for improving energy harvesting of intermittent excitations/triggering. Nano Energy 66:104104
Deng HX, Wang ZM, Du Y, Zhang J, Ma MC, Zhong X (2018) A seesaw-type approach for enhancing nonlinear energy harvesting. Appl Phys Lett 112:213902
Ouyang S, Zhang JH, Yu FP, Qin LF (2019) A vibration energy harvester based on Ca3TaGa3Si2O14 piezoelectric crystal for high temperature applications. Appl Phys Lett 115:253901
Yang F, Zhang JH, Lin MY, Ouyang S, Qin LF (2020) An ultralow frequency, low intensity, and multidirectional piezoelectric vibration energy harvester using liquid as energy-capturing medium. Appl Phys Lett 117:173901
Wang H, Li B, Liu Y, Zhao W (2019) Low-frequency, broadband piezoelectric vibration energy harvester with folded trapezoidal beam. Rev Sci Instrum 90:035001
Zhao N et al (2016) Three-dimensional piezoelectric vibration energy harvester using spiral-shaped beam with triple operating frequencies. Rev Sci Instrum 87:015003
Fan KQ, Cai ML, Liu HY, Zhang YW (2019) Capturing energy from ultra-low frequency vibrations and human motion through a monostable electromagnetic energy harvester. Energy 169:356–368. https://doi.org/10.1016/j.energy.2018.12.053
Lin Z, Zhang YL (2016) Dynamics of a mechanical frequency up-converted device for wave energy harvesting. J Sound Vib 367:170–184
Liu HC, Lee C, Kobayashi T, Tay CJ, Quan C (2011) Investigation of piezoelectric MEMS-based wideband energy harvesting system with assembled frequency-up-conversion mechanism. Procedia Eng 25:725–728
Zhang JH, Qin LF (2019) A tunable FUC wideband piezoelectric vibration energy harvester for low-frequency variable environment using a novel impact- and rope-driven hybrid mechanism. Appl Energy 240:26–34
Zhang JH et al (2016) A novel ropes-driven wideband piezoelectric vibration energy harvester. Appl Sci 6(12):402. https://doi.org/10.3390/app6120402
Liu HC, Lee C, Kobayashi T, Tay CJ, Quan C (2012) Piezoelectric MEMS-based wideband energy harvesting systems using a frequency-up-conversion cantilever stopper. Sens. Actuators A Phys 186:242–248
Yi Z, Yang B, Zhang W, Wu Y, Liu J (2021) Battery-less tire pressure real-time monitoring system driven by an ultralow frequency piezoelectric rotational energy harvester. IEEE Trans Ind Electron 68(4):3192–3201
Wang Y, Yang Z, Li P, Cao D, Huang W, Inman DJ (2020) Energy harvesting for jet engine monitoring. Nano Energy
Rui et al (2019) Design and experimental study of a piezoelectric energy harvester in automotive spokes. J Phys D Appl Phys
Zou HX et al (2017) Design, modeling and experimental investigation of a magnetically coupled flextensional rotation energy harvester. Smart Mater Struct 26(11):115023
He J, Cao SL, Zhang HL (2019) Cylinder-based hybrid rotary nanogenerator for harvesting rotational energy from axles and self-powered tire pressure monitoring. Energy Sci Eng 8(2):1–9
O’Donnell T, Saha C, Beeby S, Tudor J (2007) Scaling effects for electromagnetic vibrational power generators. Microsyst Technol 13(11):1637–1645
Modarres-Sadeghi Y et al (2011) Chaotic response is a generic feature of vortex-induced vibrations of flexible risers. J Sound Vib 330:2565–2579
Acknowledgements
This work was supported in part by the Knowledge Innovation Program of Shenzhen City (Fundamental Research, Free Exploration) under Grant JCY20190809162001746 and in part by Guangdong Basic and Applied Basic Research Foundation (Grant No.2020A1515011486) and in part by the National Natural Science Foundation of China (Grant No. 51775465).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Xia, H., Yang, F., Lin, M., Qin, L. (2022). An Eccentric Electromagnetic Energy Harvester for Rotary System. In: Jing, X., Ding, H., Wang, J. (eds) Advances in Applied Nonlinear Dynamics, Vibration and Control -2021. ICANDVC 2021. Lecture Notes in Electrical Engineering, vol 799. Springer, Singapore. https://doi.org/10.1007/978-981-16-5912-6_80
Download citation
DOI: https://doi.org/10.1007/978-981-16-5912-6_80
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-5911-9
Online ISBN: 978-981-16-5912-6
eBook Packages: EngineeringEngineering (R0)