Abstract
The thermal performance of roof configurations consists of one of the colour paints (surface treatment) analysed in terms of indoor temperature. Hourly floating temperature is evaluated using a modified Fourier admittance method for roofs with surface treatment of paints. A simulation is carried out to obtain optimal roof structure with surface treatment of colour paints for composite climate, New Delhi. Roof contributes maximum heat gain in the buildings during summer leading to higher-energy consumption throughout the summer. The impact of colour paints is analysed in terms of minimum hourly floating room temperature in the buildings. The simulation results indicated that all roof structures with colour paint performed better than roof structures without colour.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mansouri, O., Belarbi, R., Bourbia, F.: Albedo effect of external surfaces on the energy loads and thermal comfort in buildings. Energy Procedia 139, 571–577 (2017)
Talukdar, S.J., Khandaker, A., Hossen, M.S. Evaluation of the outdoor thermal discomfort of three major cities of Bangladesh. In: International Conference on Sustainability in Natural and Built Environment (iCSNBE2019), vol. 19, p. 22 (2019)
Granadeiro, V., Almeida, M., Souto, T., Leal, V., Machado, J., Mendes, A.: Thermochromic paints on external surfaces: impact assessment for a residential building through thermal and energy simulation. Energies 13(8), 1912 (2020)
Fantucci, S., Serra, V.: Investigating the performance of reflective insulation and low emissivity paints for the energy retrofit of roof attics. Energy Build. 182, 300–310 (2019)
Jandaghian, Z., Berardi, U.: Analysis of the cooling effects of higher albedo surfaces during heat waves coupling the weather research and Forecasting model with building energy models. Energy Build. 207, 109627 (2020)
Sansaniwal, S.K., Mathur, J., Garg, V., Gupta, R.: Review of studies on thermal comfort in Indian residential buildings. Sci. Technol. Built Environ., 1–22 (2020)
Nihar, K., Dhaka, S., Bhatia, A., Garg, V.: Cool roof implications on thermal adaptation in built environment. In: International Symposium to Promote Innovation & Research in Energy Efficiency (2017)
Singh, S.P., Tulsidasani, T.R., Sawhney, R.L., Sodha, M.S.: Recent researches in indirect evaporative cooler V: relative thermal performance of buildings coupled to direct and indirect evaporative cooler. Int. J. Energy Res. 21(15), 1413–1423 (1997)
Sodha, M.S., Singh, S.P., Sawhney, R.L.: Evaluation of discomfort in a room with desert cooler. Int. J. Energy Res. 14(7), 745–756 (1990)
Bansal, N.K., Garg, S.N., Kothari, S.: Effect of exterior surface colour on the thermal performance of buildings. Build. Environ. 27(1), 31–37 (1992)
Zingre, K.T., Wan, M.P., Tong, S., Li, H., Chang, V.W.C., Wong, S.K., Lee, I.Y.L.: Modeling of cool roof heat transfer in tropical climate. Renew. Energy 75, 210–223 (2015)
Dabaieh, M., Wanas, O., Hegazy, M.A., Johansson, E.: Reducing cooling demands in a hot dry climate: a simulation study for non-insulated passive cool roof thermal performance in residential buildings. Energy Build. 89, 142–152 (2015)
Zingre, K.T., Wan, M.P., Wong, S.K., Toh, W.B.T., Lee, I.Y.L.: Modelling of cool roof performance for double-skin roofs in tropical climate. Energy 82, 813–826 (2015)
Zingre, K.T., Yang, X., Wan, M.P.: Performance analysis of cool roof, green roof and thermal insulation on a concrete flat roof in tropical climate. Evergreen: Joint J. Novel Carbon Resource Sci. Green Asia Strat. 2(2), 34–43 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Singh, S.P., Rawat, M. (2021). Impact of Roof Colour Paints on the Indoor Temperature in a Non-conditioned Building of Composite Climate. In: Kumar, A., Pal, A., Kachhwaha, S.S., Jain, P.K. (eds) Recent Advances in Mechanical Engineering . ICRAME 2020. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-9678-0_8
Download citation
DOI: https://doi.org/10.1007/978-981-15-9678-0_8
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-9677-3
Online ISBN: 978-981-15-9678-0
eBook Packages: EngineeringEngineering (R0)