Understanding the Multidimensionality of Climate-Smartness: Examples from Agroforestry in Tanzania

Climate-smart agriculture (CSA) has three goals—productivity, resilience and mitigation. Rarely are these accounted for in CSA programming or the scientific evidence that supports it. Here, we evaluate the climate smartness of CSA-based agroforestry practices in Tabora and Dodoma, Tanzania using unpublished data from earlier studies. Firstly, a study of on-farm wood production and its use with the improved cook stove (ICS) was used to ascertain the productivity and mitigation effects of CSA. Next, intercropping experiments of maize or cassava with pigeonpea and/or G. sepium provided information on the production and resilience benefits of CSA. It was found that agroforestry practices (shelterbelt, trees on contours and intercropping) supplied up eight tons per hectare (t ha−1) of wood—enough to support a five-member family for up to 6 years when using ICS. Employing ICS also reduced the time spent in cooking (20%) and fuelwood collection (32%), and reduced gas emissions by 62%. Generally, intercropping pigeonpea or G. sepium enhanced farm production (as noted by a land equivalent ratio greater than 1) and agroecosystem resilience through crop diversification by using suitable intercropping arrangements and including a drought-resistant crop. Using the latter two in semi-arid Dodoma enhanced crop production across seasons and sites. Our analysis shows that adopting CSA-based agroforestry and intercropping practices is beneficial. However, these benefits are not universal. It also illustrates other key principles for understanding multidimensionality of CSA objectives, including the need to: select appropriate indicators, ensure designs are robust for heterogeneity, examine trade-offs, and conduct participatory evaluation of CSA.

that, on average, Tanzania will have future rainfall totals approximately equivalent to today, seasons may shift and the predictability of precipitation will decline (International Center for Tropical Agriculture and World Bank 2017). There is already a need to help farmers to prepare for today's variable precipitation. And coping with today's conditions will help farmers adjust better to changes in the future.
Increasing the rate of adoption of improved agricultural technologies can help build resilience to weather-related risks. For example, Kimaro et al. (2015) examined the resilience of productivity across four seasons within conventional and conservation agriculture in the highlands of central Tanzania and found higher yields and lower interannual variation across all permutations of conservation agriculture in comparison to the control. Furthermore, rainwater use efficiency (RUE) and soil moisture retention were found to be higher in conservation farming and intercropping practices in Tanzania versus traditional practices . These results suggest that improved technologies can increase resilience, especially in areas with lower than average rainfall and persistent drought.
However, the adoption of improved technology may affect more than just the resilience of the farming system. It may also affect the system's productivity, including both yields of edible and non-edible crop products and incomes (Charles et al. 2013). Furthermore, it may change the environmental sustainability of the production system; for instance, the climate change mitigation potential, by either sequestering carbon in biomass and/or soils and/or reducing greenhouse gas emissions (Kaonga and Bayliss-Smith 2009). The multidimensionalities of impacts with agricultural change are fundamental to climate-smart agriculture (CSA), which aims to achieve three goals simultaneously: sustainably increase production, improve resilience and mitigate climate change.
Despite multiple goals, rarely are CSA practices evaluated in ways that cross more than one of these three objectives (Rosenstock et al. this volume). This is important for development practitioners because it limits the evidence with which to evaluate potential trade-offs and increases the likelihood of unintended consequences with development programming (Lamanna et al. 2016). Comprehensive information that addresses multiple objectives is needed to evaluate changes in agricultural systems. That, however, is easier said than done, because research is typically undertaken for specific purposes without these three factors in mind, and the costs of multi-indicator measurements may be prohibitive.
We present data from three previously unpublished experiments in two regions of Tanzania: two near Dodoma and one near Tabora. Dodoma has a semiarid climate with a unimodal rainfall regime (7 to 8-month dry period) and mean annual precipitation of 560 millimetres (mm) (Kimaro et al. 2009). Tabora is subhumid with mean annual precipitation of 928 mm (Nyadzi et al. 2003). The experiments in both sites use pigeonpea -based intercropping systems. Here, we present examples of how scientists can investigate CSA in multidimensional assessments.

Production and Mitigation Benefits of Agroforestry and Intercropping Practices in Dodoma
In arid and semiarid areas of Tanzania, food crops and fuelwood are both the product of agricultural landscapes. Thus, issues of food, fuel and climate are inherently linked and may be best addressed together. Agroforestry-specifically, shelterbelt, G.sepium intercropping, and border plantings of fuelwood and food crops-has been promoted to address these concerns simultaneously. In theory, this technology may be climate-smart. Growing trees and crops together has been shown to have positive, negative and no effect on crop productivity (Coe et al. 2016). For instance, intercropping maize with 'fertiliser trees' such as G. sepium and/or pigeonpea (Cajanus cajan) improves land productivity, soil fertility and enhances the ability of the land to capture and store rainfall, creating resilient cropping systems (Sileshi et al. 2011;Kimaro et al. 2016). Lastly, production of fuelwood reduces collection from natural areas as well as deforestation and degradation (Ramadhani et al. 2002).
The mitigation benefits may be further enhanced when coupled with improved cook stove (ICS) technologies that increase the efficiency of fuelwood use. Thus, assessing the synergies of on-farm wood production using agroforestry along with ICS technology increases our understanding of the multidimensional impacts of CSA; yet the impacts of these technologies have often been evaluated separately. We conducted studies to evaluate the CSA benefits of on-farm wood supply and its efficient use by ICS as well as crop yields under agroforestry and maize-pigeonpea intercropping in Kongwa and Chamwino districts, Dodoma, Tanzania. The first study assessed wood supply from agroforestry technologies (shelterbelts, boundary tree planting, contours planting, and Gliricidia sepium intercropping), established on nearly 110 farmers' fields, to evaluate the climate-smartness of these technologies in Chamwino (Ilolo village) and Kongwa (Molet, Mlali Laikala and Chitego villages) districts. Fuelwood yield was determined using speciesspecific biomass equations (Sererya et al. 2017) and household wood consumption was assessed using the kitchen performance test (Uckert et al. 2017). While it has been found that greenhouse gas (GHG) emissions reduced through the use of the ICS (Sererya 2016), the offset of carbon dioxide emissions by using fuelwood produced on-farm was used to assess the mitigation impacts of ICS and agroforestry technologies. Crops production in alleys between shelterbelts was determined through the systematic sampling of small plots.
We found evidence that agroforestry met some components of CSA. Maize grain yield in the alleyways between shelterbelt strips ranged from 2.3 to 3.2 tons per hectare (t ha −1 ). Crop yields declined slightly in shelterbelt areas under the influence of trees, but were similar in yield to that obtained in maize monoculture in Dodoma (Kimaro et al. 2009). Wood biomass production in shelterbelt, farm boundaries, intercropping and on contour bounds ranged from 0.5 to 8 t ha −1 , depending on the species and spacing adopted (Table 13.1). This amount of wood can sustain a fivemember family for 4-6 years when using the traditional three-stone firewood (TSF) stove and ICS, respectively (Table 13.1). Relative to the TSF, households using ICS consumed 23% less firewood, which resulted in a reduction in fuelwood collection time (32%) as well as cooking time (20%) (Uckert et al. 2017). However, firewood and time consumption vary between different foods cooked (Hafner et al. 2018). The reduction of GHG emissions (carbon monoxide, carbon dioxide and particulate organic matter) by the ICS technology, relative to TSF, ranged from 60% to 62% (Sererya 2016). The costs of fuelwood used in ICS and TSF in Dodoma is estimated at Tanzanian Shilling (TZS) 15,984 (United States Dollar (USD) 7.2) and TZS 32,940 (USD 14.8), respectively (Sererya 2016). Based on these estimates, the economic benefits (in terms of cost savings) of on-farm wood supply ranged from USD 90 to 750 ha −1 , depending on the tree species and planting spacing adopted. These results suggest that diversification of production (crops and wood) options and income sources through agroforestry contribute in building community resilience (adaptive capacity) as noted by Charles et al. (2013).
We did not measure directly the resilience benefits of the agroforestry systems. Neither the interannual variability of production nor explicit indicators of proxies for resilient agroecosystems (soil carbon, biodiversity, resource efficiency etc.) were available. The former because of the short timeframe of the research and the latter because the research was designed for other purposes. Increasing the duration of research would have helped provide more robust evidence, as would collecting a wider range of indicators. This agrees with early assessments of the literature available in Tanzania (Lamanna et al. 2016) and, therefore, we suggest research protocols for CSA need to be more inclusive to capture specific measures of resilience.
'Mother' and 'baby' research designs were used in Malawi to examine effects across heterogeneous conditions (Snapp 2002). In this study, the mother trial (N = 15)-or replicated on-farm experiments-were laid out in a randomised complete block design and were managed by researchers. Baby trials (N = 275)-or farmer-managed demonstrations of maize-pigenopea intercropping-took place in farmers' fields to allow for participatory evaluation of the technology. Mother trial had five treatments including the control, and the baby trial had maize-pigeonpea intercropping and maize monoculture as a control. Duration of time (years) it will take for a household of five members to complete the amount of wood produced on-farm. The estimate is based on a household consumption rate of 5 kg per day when using the traditional TSF (Uckert et al. 2017) Results of this intercropping experiment showed key challenges in understanding what is and isn't CSA. Productivity in farmer-managed baby trials in three villages (Laikala, Mlali and Chitego) ranged from 1.2 to 3.2 t ha −1 (>150%), suggesting variations in site and weather conditions. Laikala and Mlali are lower potential sites due to greater degradation while Chitego is a higher potential site for crop production (Kimaro et al. 2015). Overall, maize yield in baby trials across sites was 50% higher than the farmer practice yield of 1.5 t ha −1 in the same areas (Kimaro et al. 2012). However, productivity benefits were by no means universal across all planting arrangements and agroecologies. Apart from an intercropping combination-on a one-to-one (1:1) ratio-maize grain yield was reduced by pigeonpea intercropping (Table 13.2). This yield suppression of one component in the mixture was offset when considering farm-level productivity, as reflected by the land equivalent ratio (LER) of greater than one (Table 13.3). Moreover, the intercropping arrangement with higher legume proportions of pigeonpea than maize (1:2 ratio of maize to pigeonpea) was more beneficial to farmers at Mlali village, a lower potential site (LER = 1.46) than in Chitego village, a high potential site (LER = 1.24); but only in the year of poor precipitation and yields (Table 13.3). These findings demonstrate the importance of adopting research protocols that have sufficient temporal and spatial representation to get less spurious results. In this trial, pigeonpea-a droughtresistant crop relative to maize-determines farm-level productivity benefit within the mixture under harsh conditions; reflecting improved resilience due to diversifi- Planting ratios tested were: alternate rows of maize and pigeonpea (1M:1M), one maize row and two pigeonpea rows (1M:2PP), two maize rows and one pigeonpea row (2M:1PP) and monocultures of maize (MM) and pigeonpea as controls a Planting ratios tested were: alternate rows of maize and pigeonpea(1M:1M), one maize row and two pigeonpea rows (1M:2PP), two maize rows and one pigeonpea row (2M:1PP) and monocultures of maize and pigeonpea as controls cation with drought-tolerant crops. Accordingly, we found the 1:1 arrangement (maize/pigeonpea)-the common farmer practice-to be less sensitive to site and year heterogeneity, suggesting greater resilience. Lastly, the use of LERs to quantify value for the farmer allows the combination of multiple farm outputs and, thus, provides a way to compare monoculture to polycultures. Our results show mixed results when describing yield, but clear benefits of intercropped agroforestry in terms of increased productivity and decreased variance when quantified with LERs (a more comprehensive measure), highlighting the importance of selecting appropriate indicators when studying CSA.

Production and Resilience Benefits of Cassava-Based Intercropping Practices in Tabora
Cassava is the third most important food crop, after maize and rice, in Urambo and Uyui districts, Tabora region. It is also a more drought-resistant crop than maize and rice (de Oliveira et al. 2017). Most farmers use this crop as a safety net for food shortages, especially in years with prolonged drought. At the same time, intercropping has potential to mitigate soil fertility issues. The added biomass to soils under the cassava-based intercropping system often improves fertility, acidity and soil structure, especially when leguminous species such as pigeonpea are used (Makumba et al. 2009). Thus, cassava-legume intercropping was tested as a strategy for diversifying production and/or income sources as well as building biological quality in these villages. We evaluated the resilience and productivity aspects of cassava farming under monoculture, intercropping and rotations with pigeonpea in Mbola, Itebulanda and Utenge villages. The research followed a mother-baby plot approach (Snapp 2002), with a researcher-managed plot in each village. Then, ninety farmer-managed plots (baby plots) were set up across the three villages. There was also an on-station experiment at the research farm of the Agricultural Research Institute (ARI) in Tumbi. At the research and mother plots, each treatment was replicated three times in a randomised complete block design; while treatments at the baby plots were unreplicated. Measures of yield, soil moisture and RUE were used as indicators of productivity and resilience. Mitigation was not estimated.
Yields of intercropping treatments (Canavalia, Cowpea and Pigeonpea), by comparison to the control, were reduced by 78.5%, 58% and 43% respectively in the research site at the ARI (Table 13.4). The greater reduction in yield in mother plots provides some indication of the differences between research and farmermanaged implementations of these trials. Similar results were also noted for cassava yields intercropped with pigeonpea (50%) and cowpea (60%) by farmers in their baby trial. Such a difference has broad implications for our understanding of the ability of management practices to generate resilience and livelihood benefits, as the vast majority of the data available to evaluate the climate-smartness of technologies was generated on the research stations (Rosenstock et al. this volume). Intercropping effects on RUE were similar to those on yield (Table 13.4). Comparatively low soil moisture content in intercropping treatments compared to monoculture (data not shown) suggests competition on soil moisture, which resulted in reduced yield and RUE. Apparently, monocultures of drought-tolerant crops, like cassava, provide a promising strategy to enhance farm production and to build resilience, while minimising the negative effects of intercropping. The most promising crop combinations need to be identified after more seasons (crop rotations).
This study has only been conducted for one season so far. However, it already illustrates the importance of offering CSA options from a farmer-centric perspective. Preliminary results suggest that cassava is sensitive to competition, and yields may be adversely affected by intercropping, especially in seasons with low and sporadic precipitation, like in 2017. Thus, despite the best intentions, cassava intercropping may not be climate-smart in this area and, perhaps, farmers are better off by diversifying into cassava monocultures, cassava-legume rotation if they want to diversify out of maize.

Implications for Development
This chapter analyses the benefits and trade-offs of three agroforestry and intercropping practices in two agroecologies to build evidence for CSA scaling in Tanzania. The analysis involved on-farm wood supply using shelterbelts, intercropping and contours technologies as well as crops production and the resilience effects of pigeonpea -based intercropping systems in semiarid Dodoma and subhumid Tabora. Integrating on-farm wood production and ICS contributed to meeting the multiobjectives of CSA through improved wood supply to meet household annual demand and reducing GHG emissions (less than 60% relative to TSF) as well as productive time lost in cooking and searching for firewood. Moreover, crop diversification at the appropriate intercropping combinations enhanced crop yield (maize and pigeonpea) and agroecosystem resilience as noted by higher LER in the 1:1 ratio across sites. Plant combinations with higher proportions of pigeonpea conferred greater resilience, especially in seasons with less precipitation, which demonstrates the significance of selecting for drought-resistant crops and appropriate farm management practices (i.e., planting combinations/density) in building resilient farming systems. The suppression of yields of intercropped cassava (43-79%) during the first season suggests that the benefits of intercropping may take time to be realised and/or may be comprised by the poor selection of companion crops and farm management practices, such as intercropping, crop rotation, and plant spacing. Trends of CSA benefits in research and farmer-managed experiments were similar, although absolute values of yields (maize, cassava or fuelwood) were higher in research plots. Thus, participatory evaluation of technology is critical for validating and downscaling research results under farmer management conditions and for farmers to appreciate the benefits of CSA prior to wide scaling. Overall results of our analysis of CSA benefits illustrate key principles when considering the multidimensionality of CSA, including the need to: select appropriate indicators, ensure designs are robust for heterogeneity, examine trade-offs, and conduct participatory evaluation of CSA on farmers' field sites. Together, these factors provide more robust evidence for CSA programming and help practitioners and policymakers to be on the lookout for such issues and support evidence-based scaling initiatives. Unfortunately, so many practices and technologies have been labeled CSA in the past few years that some would say it is just rebranding. Accounting for the principles highlighted here, and explicitly considering the multidimensionality of CSA objectives in decision-making, will go a long way to improving implementation and achieving outcomes for farmers.
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made. The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.