Validation of Screening Protocols for Heat Tolerance in Rice

Selected heat tolerant mutant rice genotypes were tested for physiological and biochemical indicators associated with the pre-field screen protocols. These tests included measuring physiological and biochemical indicators associated with plant stress responses, such as electrolyte leakage, malondialdehyde level, total protein content, antioxidant enzyme activity at seedling, vegetative stages and flowering stages to understand the mechanism of the heat tolerance characteristics/traits of the selected germplasm and explore the potential of pyramiding different mutations for durable heat tolerance. The candidate heat tolerant mutant lines were also tested in hot spot areas in the different countries.

breeders need to be selective in what is to be tested. The pre-field screening protocols described in Chap. 2 provide potential candidates that may be advanced for field evaluations thus saving time, space and costs on lines with no potential.

Physiological and Biochemical Characterization of Heat Tolerant Lines at the Seedling Stage
Physiological and biochemical changes to heat stress in rice include electrolyte leakage, lipid peroxidation level, MDA content and antioxidant enzyme activity (Campos et al. 2003;Heath and Packer 1986;Bajji et al. 2001;Nakano and Asada 1981;Oberley and Spitz 1985). Selected heat tolerant mutant lines of rice recorded a low level of electrolyte leakage thereby indicating less damage to membrane, as compared to the wild type parent medium heat tolerant IR64 ( Fig. 3.1). Moreover MDA content (an indicator of lipid peroxidation) was assessed as a test for heat tolerance. It was observed that heat tolerant mutant lines showed relatively low MDA levels ( Fig. 3.2). MDA is a reactive aldehyde and is one of the many reactive electrophile species that cause toxic stress in cells. Thus, the lower the level of MDA shows better plant performance. Antioxidant enzymes such as CAT and APX (ascorbate peroxidase) showed higher activity on the first day of heat stress treatment and SOD showed higher activities on the third day of heat stress treatment, as compared to wild type genotypes ( Fig. 3.3) indicating a heat stress tolerant physiology.

Physiological and Biochemical Characterization of Heat Tolerant Lines at the Flowering Stage
Before heat treatments at flowering of the putative heat tolerant lines (D100/P1-8, D100/P1-79, D100/P2-111, D100/P4-96), an assessment was made for membrane stability at the late vegetative stage. Electrolyte leakage was similar in all genotypes in control conditions, but the heat tolerant lines had superior electrolyte leakage than the wild type standard under heat stress conditions ( Fig. 3.4).
Morphological and biochemical analysis of putative heat tolerant mutant plants were analysed at the flowering stage as this is a temperature sensitive stage (Jagadish et al. 2007). The mutants phenotype were analysed under optimum temperatures in glasshouse conditions immediately after heat stress treatment (40 C for 4 h) and after recovery (72 h, 28 C). The putative heat tolerant mutants performed better than their wild type parent ( Fig. 3.5). The mutant plants were healthy and continued to grow after the heat stress treatment, whereas a reduction in growth was observed in wild type plants after heat stress and during the recovery period. Data on panicle length, height, number of tillers and number of seeds per panicle were found to be superior in the heat tolerant mutants than for wild type ( Fig. 3.5). The putative mutant lines also produced more vegetative and reproductive growth under normal as well as heat stress conditions, indicating that tolerance to heat stress was constitutive.
Anthesis in rice is very sensitive to heat stress (Jagadish et al. 2007). Putative heat tolerant mutants performed better than their wild type parent under heat stress at the flowering stage. Phenotypic data were recorded in control optimum temperature conditions, immediately after heat stress treatment (40 C for 4 h) for three subsequent days (to span main panicle flowering) and after recovery (72 h 28 C). Besides healthier appearance and better growth, the putative heat tolerant mutants recorded higher spikelet fertility and yield components such as panicle length, number of tillers, and number of spikelets per panicle grain yield and plant height per plot as compared to wild type. The mutant lines had a higher vegetative and reproductive growth under both normal and heat stress conditions, suggesting that the genetic controls were constitutive.

Electrolyte Leakage Measurement
Analysis of electrolyte leakage is carried out following the protocol of Bajji et al. (2002). Leaf samples from control and heat-treated plants are harvested and washed with distilled water to remove any surface adhering ions. About 100 mg of the tissue are dipped immediately into 20 ml of de-ionized water. After incubating the leaf tissues at 37 C for 2 h, the electrical conductivity (E1) of the immersion solution is measured using a conductivity meter (ELEINS, Inc., India). To determine the total conductivity (E2), the samples with immersion solution (effusate) are autoclaved for 15 min at 121 C and the conductivity of the effusate is measured after cooling it to room temperature. Relative electrical conductivity is measured by the formula: percentage of electrolyte leakage ¼ E1/E2 Â 100.

Lipid Peroxidation Assay
Lipid peroxidation is estimated measuring the formation of MDA. MDA content is quantified by thiobar-bituric acid reactive substances assay (Heath and Packer 1986;Larkindale and Knight 2002). For this, about 100 mg of leaf tissue from the control and heat-treated plants is homogenized in 5 mL of 5% (w/v) trichloroaceticacid and the homogenate centrifuged at 12,000Âg for 10 min at room temperature. The supernatant is mixed with an equal volume of thiobarbituric acid [0.5% in 20% (w/v) trichloroaceticacid] and the mixture is then boiled for 25 min at 100 C, followed by centrifugation for 5 min at 7500 g to clarify the solution. Absorbance of the supernatant is measured at 532 nm. MDA equivalents are calculated by the extinction coefficient of 155 mM À1 cm À1 .

Measurement of Total Proteins
Total soluble proteins are extracted from the rice leaves (100 mg) of heat treated plants at the seedling stage using Zivy's buffer (Zivy et al. 1983). Amount of soluble proteins is estimated by Bradford's assay (Bradford 1976) with the help of the standard curve prepared using various known concentrations of other protein, such as Bovine Serum Albumin (BSA fraction V), prepared by using different concentration of Bovine Serum Albumin (Ernst and Zor 2010).

Antioxidant Enzyme Activity Assay
About 100 mg leaf material from the heat treated plants was homogenized in ice-cold 50 mM K-PO 4 buffer (pH 7.5) containing 2 mM EDTA and 0.1 mM phenylmethylsulphonylfloride (PMSF). The homogenizing buffer for APX additionally contained 2 mM of Na-ascorbate. The homogenate was centrifuged at 12,000Âg for 10 min at 4 C and the supernatant was used for enzyme assay. Total protein content in supernatant was determined following the method of Bradford (1976).The activity of SOD was measured using the method of Giannopolitis and Reis (1977). The assay mixture (1 mL) for SOD contained 79.2 mM Tris-HCI buffer (pH 8.9), containing 0.12 mM EDTA, 10.8 mM tetra ethylene diamine, bovineserum albumin (3%), 6 mM nitroblue tetrazolium (NBT), 60 μM riboflavin in 5 mM KOH and 5 μg of enzyme extract. The increase in absorbance due to formazan formation was read at 560 nm. The increase in absorbance in the absence of enzyme was taken as 100%, and 50% initial was taken as equivalent to 1 unit of SOD activity. APX activity was determined according to Nakano and Asada (1981). The reaction mixture in a total volume of 1 ml consisted of 50 mM (pH 7.5) K-PO4buffer, 0.1 mM EDTA, 0.25 mM ascorbate, 10 mM H 2 O 2 and enzyme extract. H 2 O 2 -dependent oxidation of ascorbate was followed spectrophotometrically by recording the decrease in absorbance at 290 nm (D ¼ 2.8 mM À1 cm À1 ). Slope values of absorbance in 290 nm are considered for rate calculation. Catalase (CAT) activity was determined following the method of Aebi (1983) by measuring the decrease in absorbance at 240 nm due to the decomposition of H 2 O 2 (D ¼ 40 M À1 cm À1 ). The slope value of the rapid decline in 240 nm absorption was considered for rate calculation. The reaction mixture in 1 ml contained 50 mM K-PO 4 buffer (pH 7.0) with leaf extract equivalent to 4-5 μg protein. The reaction was initiated by adding H 2 O 2 to a final concentration of 20 mM. All the experiments involved in physiological and biochemical analyses were repeated three times using three independent mutant plants from each line.

Validation Protocols of Rice Heat Tolerance Under Field Conditions
After screening at the seedling stage and flowering stages (as described in Chap. 2) identified heat tolerant genotypes were tested in field conditions to validate the pre-field screening protocols in hotspot test locations.
The field trials were conducted in different places which were known for heat stress in Cuba, Pakistan and UR Tanzania. Field experiments were planted in completely randomized block designs with three or four replications per location. To further verify the results of seedling and reproductive stages screening protocols data were collected on: • Time of day for flowering (anthesis) • Plant height • Number of tillers per plant • Panicle length • Spikelet number of the main tiller panicle • Spikelet fertility (ratio of filled/unfilled grains) • Thousand kernel weight • Paddy yield Data were recorded for plant height; number of productive tillers per plant, panicle length, and spikelet per main panicle, panicle fertility, thousand seed weight and yield were recorded. From these data the tested genotypes including mutant lines were categorized as below (Tables 3.1, 3.2 and 3.3).
Screened lines were evaluated for various agro-morphological characters in field tests and compared to standards including local cultivars and parental lines at different locations and years. Temperature and rainfall of the locations were recorded and compared with long term temperature means. Comparisons were made for yield performance as well as yield components such as spikelet number, thousand kernel weight and filled/unfilled grain ratio under natural high temperature conditions. The results of field screening confirmed the results of the laboratory (physiological and biochemical) testing and also pre-field screening results at both the seedling and flowering stage.

Validation Protocols of Rice Heat Tolerance Under Field Conditions
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 3.0 IGO license (https://creativecommons.org/licenses/by/3.0/igo/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the International Atomic Energy Agency (IAEA), provide a link to the Creative Commons license and indicate if changes were made.
Any dispute related to the use of the works of the IAEA that cannot be settled amicably shall be submitted to arbitration pursuant to the UNCITRAL rules. The use of the IAEA's name for any purpose other than for attribution, and the use of the IAEA's logo, shall be subject to a separate written license agreement between the IAEA and the user and is not authorized as part of this CC-IGO license. Note that the link provided above includes additional terms and conditions of the license.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.