Abstract
Using the improved genetic algorithm (IGA) and according to the characteristics of the hub motor, a novel direct drive outer rotor hub motors which is known as permanent magnet synchronous motor (PMSM) used in vehicle was developed. Aiming to the design requirements, the overall design scheme of the outer rotor hub motor was given, and the main size and the overall electromagnetic structure were analyzed and calculated. By using ANSYS software, the internal electromagnetic field analysis of the machine was made. Finally, applying the direct torque control method on the hub motor (PMSM) based on SPWM through MATLAB/SIMULINK, and the simulation results show that the performance of the prototype designed reasonably.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Xing, X., Shi, C.: Design of a fault-tolerant direct-drive hub motor used by electric vehicle. Small Special Electr. Mach. 44(10), 22–25 (2016)
Jia, Y., Tong, L., Lu, T., Du, C.Y.: Simulation analysis and design of speed control system for direct drive motor. J. Beijing Inf. Sci. Technol. Univ. 28(6), 5–9 (2013)
Lei, L., Hu, Y., Song, Z., Chen, Y., Zhang, H.: Design of outer rotor hub motor for electric vehicle. Micromotors 49(10), 6–9 (2016)
Lu, D., Ouyang, M., Gu, J., Li, J.: Field oriented control of permanent magnet brushless hub motor in electric vehicle. Electr. Mach. Control 16(11), 76–83 (2016)
Wang, X., Gao, P.: Analysis of 3-D temperature of in-wheel motor with inner-oil improved cooling for electric vehicle. Electr. Mach. Control 20(3), 36–41 (2012)
Yane, Z., Jianwu, Z.: Study on electronic differential control system of independent in-wheel motor drive electric vehicle. J. Syst. Simul. 20(18), 4767–4771 (2008)
Sun, M.: Design and flux-weakening control for in-wheel motor of electric vehicle. Harbin Institute of Technology, Harbin, Ph.D., pp. 25–32 (2009)
Shen, X., Zhao, Q., Xu, P.: Control research on maximum power of the direct-drive permanent magnet synchronous rotor. J. Electr. Power 29(1), 28–31 (2014)
Liu, J., Hao, S., Sun, M., Zheng, W., Hao, M.: Research on permanent magnet synchronous in-wheel motor design and flux-weakening control. Micromotors 43(2), 17–21 (2010)
Chen, Q., Shu, H., Ren, K., Chen, L., Chen, B., Xin, A.: Optimization design of driving in-wheel motor of micro-electric vehicle based on improvement genetic algorithm. J. Central South Univ. (Sci. Technol.) 43(8), 2013–3018 (2012)
Shen, J., Miao, D.: Variable speed permanent magnet synchronous rotor systems and control strategies. Trans. China Electrotechn. Soc. 28(3), 2–8 (2013)
An, Q., Sun, L., Sun, L.: Research on novel open-end wind permanent magnet synchronous motor vector control systems. Proc. CSEE 35(22), 5891–5898 (2015)
Gao, J.: Research on design technology and application of direct-drive permanent magnet rotor with wind turbine. Hunan University Ph.D., Changsha, pp. 36–55 (2013)
Liu, Z.: Optimal design of permanent magnet synchronous motor vehicle characteristics and speed control system. J. Minjiang Univ. 31(5), 44–48 (2010)
Weng, M., Li, Q., Cao, M.: Parameters calculation and structure design for wheel hub permanent magnet brushless direct current motor of drive method. Electric Mach. Control Appl. 42(7), 12–15 (2015)
Acknowledgment
This research was supported by the Natural Science Foundation of Fujian Province of China. (Grant No. 2017J01667).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Liu, ZS. (2018). Optimum Design and Control Research of Direct Drive Hub Motor. In: Pan, JS., Tsai, PW., Watada, J., Jain, L. (eds) Advances in Intelligent Information Hiding and Multimedia Signal Processing. IIH-MSP 2017. Smart Innovation, Systems and Technologies, vol 82. Springer, Cham. https://doi.org/10.1007/978-3-319-63859-1_31
Download citation
DOI: https://doi.org/10.1007/978-3-319-63859-1_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-63858-4
Online ISBN: 978-3-319-63859-1
eBook Packages: EngineeringEngineering (R0)