Abstract
The difference in metallurgical quality of C-HRA-3 alloy smelting using two kinds of slag system was investigated by 10 kg electroslag remelting furnace. The results show that the alloy electroslag ingot smelting by a new-type 50% CaF2-26% Al2O3-20% CaO-3% MgO basic slag system has better surface quality compared to 60% CaF2-20% Al2O3-10% CaO-10% MgO basic slag system. The columnar crystal growth direction of the electroslag ingot, smelting by new-type slag system, has a smaller angle with the centerline, and the depth of the molten pool is greater. The content of Al, Ti, Zr, Si, and B at various positions of two electroslag ingots smelting with the same proportion of TiO2 and ZrO2 components can be controlled within the target content range of C-HRA-3 alloy. There are fewer inclusions in the electroslag ingot smelting by new-type slag system, and the proportion of oxide inclusions at four different ingot heights is lower.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chen ZZ, Liu ZD, Dong C, Bao HS, Zhang P, Han K, Gao P (2020) Stress rupture properties and microstructure characteristic of C-HRA-3 heat-resistant alloy at 850 °C. Heat Treat Met 45(01):135–138
Chen ZZ, Liu ZD, Bao HS, Gan Y (2017) Kinetics of austenite grain growth in heat-resistant alloy C-HRA-3. Iron Steel 52(07):64–67
Liu ZD, Chen ZZ, He XK, Bao HS (2020) Systematical innovation of heat resistant materials used for 630–700 °C advanced ultra-supercritical (A-USC) fossil fired boilers. Acta Metall Sin 56(4):539–548
Chen XC, Wang F, Shi CB, Ren H, Feng D (2012) Effect of electroslag remelting process on desulphurization of GH4169. J Iron Steel Res 24(12):11–16
Liu FB, Zang XM, Jiang ZH, Geng X (2010) Removal of non-metallic inclusions in current-conductive mould ESR process. China Metall 20(05):5–8
Yang BF, Liu JH, Han ZB, Liu HB, He Y, Yao CF (2015) Effect of electroslag remelting on inclusions in FeCrAl stainless steel. J Iron Steel Res 27(10):19–25
Li X, Geng X, Jiang ZH, Li HB, Xu FH, Wang LX (2015) Influences of slag system on metallurgical quality for high temperature alloy by electroslag remelting. Iron Steel 50(09):41–46
Wu ZH, Guo B, Wang SW, Wang YT, Zhang JW (2023) Effect of electroslag remelting in protective atmosphere on composition and inclusions of DZ2 high-speed axle steel. Spec Steel 44(01):19–24
Gao SL (2014) Study on electroslag remelting for GH3128 and GH2132 alloys by new premelted slag. Spec Steel Technol 20(01):50–52
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Lin, T., Li, L., Yang, Y. (2024). Experimental Investigation on Electroslag System for C-HRA-3 Heat-Resistant Alloy. In: Peng, Z., et al. Characterization of Minerals, Metals, and Materials 2024. TMS 2024. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-031-50304-7_46
Download citation
DOI: https://doi.org/10.1007/978-3-031-50304-7_46
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-50303-0
Online ISBN: 978-3-031-50304-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)