Abstract
Due to the recent developments and growth in the field of surface engineering, several new coatings and deposition techniques, such as PVD, CVD, and PACVD (Plasma Assisted Chemical Vapour Deposition) are increasingly applied in the industry. Duplex technologies, like the combined processes involving a PVD or PACVD coating and a preliminary plasma nitriding, enhance the mechanical, chemical, and physical performance of the surface layer in a new, efficient way. The objective of our research work is to investigate the tribological behaviour of two, industrially applied duplex treated advanced TiAlN and CrAlN hard coatings, which can efficiently be used to improve the lifetime of the X153CrMoV12 cold work tool steel. Instrumented scratch tests with constant and progressive loading were carried out to compare the resistance of the two hard coatings to scratching, while ball-on disc tests were accomplished to compare their wear resistance. The investigations were supplemented with morphological analysis of the scratch grooves and wear tracks using optical microscopy, while the coatings were characterised with their microVickers hardness and layer thickness determined by the ball cratering method. Results prove a significant improvement of the tribological performance of the tested coatings compared to the uncoated reference material and superior wear behaviour of the CrAlN coating in terms of both scratch and wear resistance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bell, T., Bardet, W.P.: Surface Engineering. ASM International Handbook, vol. 5, pp. 1800–1810 (1994)
Burakowski, T., Wierzchon, T.: Surface Engineering of Metals: Principles, Equipment, Technologies, p. 608. CRC Press, Boca Raton (1998). ISBN: 9780849382253
Luo, D.B., Fridrici, V., Kapsa, P.: A systematic approach for the selection of tribological coatings. Wear 271(9–10), 2132–2143 (2011). https://doi.org/10.1016/j.wear.2010.11.049
Jehn, H.A.: Multicomponent and multiphase hard coatings for tribological applications. Surf. Coat. Technol. 131(1–3), 433–440 (2000). https://doi.org/10.1016/s0257-8972(00)00783-0
Vetter, J., Barbezat, G., Crummenauer, J., Avissar, J.: Surface treatment selections for automotive applications. Surf. Coat. Technol. 200(5–6), 1962–1968 (2005). https://doi.org/10.1016/j.surfcoat.2005.08.011
Holmberg, K., Ronkainen, H., Matthews, A.: Tribology of thin coatings. Ceram. Int. 26(7), 787–795 (2000). https://doi.org/10.1016/s0272-8842(00)00015-8
Pye, D.: Practical Nitriding and Ferritic Nitrocarburizing. ASM International, Chapter 1, pp. 15–18 (2003). ISBN: 0-87170-791-8
https://www.oerlikon.com/balzers/hu/hu/termekportfolio/surface-technologies/pvd-based-processes/arc-evaporation/. Accessed 15 Oct 2021
https://www.oerlikon.com/balzers/global/en/portfolio/balzers-surface-solutions/pvd-and-pacvd-based-coating-solutions/balinit/crn-based/balinit-formera/?tab=applications_29. Accessed 15 Oct 2021
https://www.oerlikon.com/balzers/global/en/portfolio/balzers-surface-solutions/pvd-and-pacvd-based-coating-solutions/balinit/tialn-based/balinit-lumena/?tab=applications_58. Accessed 15 Oct 2021
Gonczy, S.T., Randall, N.: An ASTM standard for quantitative scratch adhesion testing of thin, hard ceramic coatings. Int. J. Appl. Ceram. Technol. 2(5), 422–428 (2005). https://doi.org/10.1111/j.1744-7402.2005.02043.x
Valli, J., Mäkelä, U.: Applications of the scratch test method for coating adhesion assessment. Wear 115(1–2), 215–221 (1987). https://doi.org/10.1016/0043-1648(87)90211-0
Berg, G., Friedrich, C., Broszeit, E., Berger, C.: Scratch test measurement of tribological hard coatings in practice. Fresenius’ J. Anal. Chem. 358(1–2), 281–285 (1997). https://doi.org/10.1007/s002160050407
Nledengvist, P., Hogmark, S.: Experiences from scratch testing of tribological PVD coatings. Tribol. Int. 30(7), 507–516 (1997). https://doi.org/10.1016/s0301-679x(97)00014-5
Khadem, M., Penkov, O.V., Yang, H.-K., Kim, D.-E.: Tribology of multilayer coatings for wear reduction: a review. Friction 5(3), 248–262 (2017). https://doi.org/10.1007/s40544-017-0181-7
Hutchings, I. (ed.): Tribology Friction and Wear of Engineering Materials, 2nd edn., pp. 165–185. University of Cambridge, UK Philip Shipway University of Nottingham, UK (2017)
Ali, H.M.: Design and Manufacturing of a Pin-on-Disc wear testing apparatus. Kirkuk Univ. J. Sci. Stud. 12(4), 77–108 (2017)
https://www.boehler.hu/app/uploads/sites/92/2022/03/productdb/api/k110_hu.pdf. Accessed 26 Mar 2022
DIN EN 1071-2: Advanced technical ceramics - methods of test for ceramic coatings - Part 2: determination of coating thickness by the crater grinding method, pp. 1–17 (2003)
ASTM Standard G99, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. ASTM International, West Conshohocken, PA (2010)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Jalalova, P., Fülöp, F., Maros, M.B. (2023). Investigation of the Tribological Behaviour of Advanced TiAlN and CrAlN Hard Coatings Deposited on X153CrMoV12 Cold Work Tool Steel. In: Jármai, K., Cservenák, Á. (eds) Vehicle and Automotive Engineering 4. VAE 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-15211-5_51
Download citation
DOI: https://doi.org/10.1007/978-3-031-15211-5_51
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-15210-8
Online ISBN: 978-3-031-15211-5
eBook Packages: EngineeringEngineering (R0)