Abstract
According to the general process as per Chap. 2, the factory has been modeled as a sequence of sections agreeing with the specified processes. Depending on the process, they will be stated the general requirements of energy and water described in the following sections.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ceramic technology sanitary-ware, 2010th edn. SACMI IMOLA S.C. (2010)
Manufacturing systems for ceramic sanitary ware SACMI. https://www.sacmi.com/en-US/Ceramics/Sanitaryware. Accessed 05 Nov 2020
Cuviella-Suárez C, Colmenar-Santos A, Borge-Diez D, López-Rey Á (2018) Management tool to optimize energy and water consumption in the sanitary-ware industry. J Clean Prod 197, Part 1:280–296. https://doi.org/10.1016/j.jclepro.2018.06.195
Cuviella-Suárez C, Colmenar-Santos A, Borge-Diez D, López-Rey Á (2019) Heat recovery in sanitary-ware industry applied to water and energy saving by multi-effect distillation. J Clean Prod 213:1322–1336. https://doi.org/10.1016/j.jclepro.2018.12.269
Saidur R, Hossain MS, Islam MR, Fayaz H, Mohammed HA (2011) A review on kiln system modeling. Renew Sustain Energy Rev 15(5):2487–2500. https://doi.org/10.1016/j.rser.2011.01.020
Reference document on best available techniques in the ceramic manufacturing industry. European Commission, August 2007 (2007). http://eippcb.jrc.ec.europa.eu/reference/BREF/cer_bref_0807.pdf. Accessed 02 Dec 2016
Kaya S, Küçükada K, Mançuhan E (2008) Model-based optimization of heat recovery in the cooling zone of a tunnel kiln. Appl Therm Eng 28(5):633–641. https://doi.org/10.1016/j.applthermaleng.2007.04.002
de Paulo Nicolau V, Dadam AP (2009) Numerical and experimental thermal analysis of a tunnel kiln used in ceramic production. J Braz Soc Mech Sci Eng 31(4):297–304. https://doi.org/10.1590/s1678-58782009000400003
Mezquita A, Boix J, Monfort E, Mallol G (2014) Energy saving in ceramic tile kilns: cooling gas heat recovery. Appl Therm Eng 65(1):102–110. https://doi.org/10.1016/j.applthermaleng.2014.01.002
Zhang Y, Wang J, Redemann T, Specht E (2015) Thermal behavior of kiln cars while traveling through a tunnel kiln. Adv Mech Eng 7(5):1687814015588468. https://doi.org/10.1177/1687814015588468
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Cuviella-Suárez, C., Borge-Diez, D., Colmenar-Santos, A. (2021). Production Line: Process and Energy Modeling. In: Water and Energy Use in Sanitary-ware Manufacturing. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-030-72491-7_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-72491-7_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-72490-0
Online ISBN: 978-3-030-72491-7
eBook Packages: EnergyEnergy (R0)