Abstract
Federal Aviation Administration (FAA) currently does not allow use of recycled asphalt pavement (RAP) on Airport Improvement Program (AIP) funded airport runway and taxiway pavement projects, and is allowed for use only in pavement shoulders. FAA’s National Airport Pavement and Materials Research Center (NAPMRC) was established to evaluate performance of new and sustainable asphalt material technologies (such as WMA, RAP, etc.) under heavy aircraft loading at high pavement temperatures. As part of Test Cycle 2 (TC2), six test lanes were constructed – four outdoors and two indoors, each encompassing three different test sections. In two indoor lanes, RAP was added to the warm mix asphalt (WMA). Lane-1 is the control section with FAA standard P401 specification hot mix asphalt (HMA). Heavy weight deflectometer (HWD) tests were performed on the constructed test lanes to characterize the pavements. Extensive laboratory tests are planned on RAP/WMA and HMA (field cores and loose mixes). The test lanes will be subjected to accelerated pavement tests (APT) using custom designed airport heavy vehicle simulator (HVS-A) to study rutting performance (at high pavement temperatures) and fatigue behavior. This paper presents construction of test lanes, asphalt mix designs (with and without RAP), results from HWD tests on test lanes with RAP/WMA, and results from laboratory tests on pavement materials..
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hettiarachchi, C., Hou, X., Wang, J., Xiao, F.: A comprehensive review on the utilization of reclaimed asphalt material with warm mix asphalt technology. Constr. Build. Mater. 227 (2019). https://doi.org/10.1016/j.conbuildmat.2019.117096
Aho, B., Hein, D., Dennechuk, S., Bessom, R.: 10 Years of experience using warm mix asphalt for airside pavements—Boston Logan Airport. In: International Conference in Transportation & Development, p. 12. American Society of Civil Engineers, Reston, VA (2016). https://doi.org/10.1061/9780784479926.001
Garg, N., Kazmee, H., Ricalde, L., Parsons, T.: Rutting evaluation of hot and warm mix asphalt concrete under high aircraft tire pressure and temperature at National Airport Pavement and Materials Research Center. Transp. Res. Rec. J. Transp. Res. Board. 1–11 (2018). https://doi.org/10.1177/0361198118794293
Bonaquist, R.F.: Mix design practices for warm mix asphalt. NCHRP Report 691. National Cooperative Highway Research Program TRB, Washington, DC, USA (2011)
Capitao, S.D., Picado-Santos, L.G., Martinho, F.: Pavement engineering materials: review on the use of warm-mix asphalt. Constr. Build. Mater. 36, 1016–1024 (2012). https://doi.org/10.1016/J.CONBUILDMAT.2012.06.038
Chen, D.-H., Bilyeu, J., Lin, H.-H., Murphy, M.: Temperature correction on falling weight deflectometer measurements. Transp. Res. Rec. J. Transp. Res. Board. 1716, 30–39 (2000). https://doi.org/10.3141/1716-04
Lukanen, E.O., Stubstad, R., Briggs, R.: LTPP guide to asphalt temperature prediction and correction. Research Report No. FHWA-RD-98–085. FFHWA, McLean, VA (2000)
Loulizi, A., Al-Qadi, I., Lahouar, S., Freeman, T.: Measurement of vertical compressive stress pulse in flexible pavements: representation for dynamic loading tests. Transp. Res. Rec. J. Transp. Res. Board. 2002, 125–136 (1816). https://doi.org/10.3141/1816-14
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Garg, N., Kazmee, H., Ricalde, L. (2022). Use of Recycled Asphalt Pavement (RAP) in Airport Pavements. In: Di Benedetto, H., Baaj, H., Chailleux, E., Tebaldi, G., Sauzéat, C., Mangiafico, S. (eds) Proceedings of the RILEM International Symposium on Bituminous Materials. ISBM 2020. RILEM Bookseries, vol 27. Springer, Cham. https://doi.org/10.1007/978-3-030-46455-4_242
Download citation
DOI: https://doi.org/10.1007/978-3-030-46455-4_242
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-46454-7
Online ISBN: 978-3-030-46455-4
eBook Packages: EngineeringEngineering (R0)