Abstract
Computational aeroacoustics simulations require a considerable amount of time, which makes the comparison of a large number of different geometric designs a difficult task. The goal of the present study were to provide a suitable methodology for aeroacoustic optimization. By means of numerical analyses using commercial computational fluid dynamics tools (Ansys Fluent), the application of a detached splitter plate in the turbulent wake of a circular cylinder as a passive control method for noise generation was investigated. We have employed two-dimensional URANS simulations, so this case can be considered a toy problem, which contains the main challenges of the physical problem and could indicate trends correctly, but was simplified in order to decrease the computational cost to an affordable level, at the cost of making comparison with experimental data not possible. The irradiation of noise caused by the interaction between the flow and both bodies was evaluated using computational aeroacoustics tools based on the Ffowcs-Williams and Hawkings method. Using a commercial optimization software package (modeFRONTIER), various design optimization methodologies were applied to this flow in order to achieve a possible optimal configuration, i.e., one which is capable of reducing the far field noise level without increasing the aerodynamic forces. Using a multi-objective optimization tool, it was possible to evaluate the behavior of heuristic optimization algorithms and the major advantage of algorithms based on response surface methods when applied to a nonlinear aeroacoustics problem, since they require a smaller number of calculated designs to reach the optimal configuration. In addition, we applied a partitive clustering technique to identify and group the cases simulated into five clusters based on their geometric parameters, overall sound pressure level and RMS of the drag coefficient, confirming the efficiency of the application of long detached splitter plates placed next to the cylinder in stabilizing the turbulent wake, whereas the positioning of splitter plates at a distance larger than a critical gap increased the overall sound pressure level radiated due to the formation of vortices in the gap.
Similar content being viewed by others
References
Ali MSM (2011) Flow and noise associated with the interaction of a square cylinder with a downstream flat plate. PhD thesis, School of Mechanical Engineering, University of Adelaide
Becker S, Hahn C, Kaltenbacher M, Lerch R (2008) Flow-induced sound of wall-mounted cylinders with different geometries. AIAA J 46:2265–2281. https://doi.org/10.2514/1.34865
Lighthill MJ (1952) On sound generated aerodynamically. I. General theory. Proc R Soc Lond 211(1107):564–587. https://doi.org/10.1098/rspa.1952.0060
Orselli RM (2012) Investigação numérica de escoamento e ruído gerado em corpos rombudos prismáticos. PhD thesis, Mechanical Engineering Department, Universidade de São Paulo
Curle N (1955) The influence of solid boundaries upon aerodynamic sound. Proc R Soc Lond 231(1187):505–514. https://doi.org/10.1098/rspa.1955.0191
Strouhal V (1878) ’Über eine besondere art der tonerregung. Ann Phys 241(10):216–251. https://doi.org/10.1002/andp.18782411005
You D, Choi H, Choi M, Kang S (1998) Control of flow-induced noise behind a circular cylinder using splitter plates. AIAA J 36(11):1961–1967. https://doi.org/10.2514/2.322
Choi H, Jeon W, Kim J (2008) Control of flow over a bluff body. Annu Rev Fluid Mech 40:113–139. https://doi.org/10.1146/annurev.fluid.39.050905.110149
Hwang J, Yang K (2003) Reduction of flow-induced forces on a circular cylinder using a detached splitter plate. Phys Fluids 15(8):2433–2436. https://doi.org/10.1063/1.1583733
Zdravkovich MM (1981) Review and classification of various aerodynamic and hydrodynamic means for suppressing vortex shedding. J Wind Eng Ind Aerodyn 7(2):145–189. https://doi.org/10.1016/0167-6105(81)90036-2
Kwon K, Choi H (1996) Control of laminar vortex shedding behind a circular cylinder using splitter plates. Phys Fluids 8:479. https://doi.org/10.1063/1.868801
Unal MF, Rockwell D (1988) On vortex formation from a cylinder. Part 2. Control by splitter-plate interference. J Fluid Mech 190:513–529. https://doi.org/10.1017/S0022112088001430
Anderson EA, Szewczyk AA (1997) Effects of a splitter plate on the near wake of a circular cylinder in 2 and 3-dimensional flow configuration. Exp Fluids 23(2):161–174. https://doi.org/10.1007/s003480050098
Winkler M, Becker K, Doolan C, Kameier F, Paschereit CO (2012) Aeroacoustic effects of a cylinder-plate configuration. AIAA J 50(7):1614–1620. https://doi.org/10.2514/1.J051578
Cox JS, Rumsey CL, Brentner KS, Younis BA (1998) Computation of vortex shedding and radiated sound for a circular cylinder: subcritical to transonic Reynolds numbers. Theor Comput Fluid Dyn 12(4):233–253. https://doi.org/10.1007/s001620050108
Roshko A (1954) On the drag and shedding frequency of two-dimensional bluff bodies. NACA TN, 3619:1–25. doi: 2060/19930083869
Ozono S (1999) Flow control of vortex shedding by a short splitter plate asymmetrically arranged downstream of a cylinder. Phys Fluids 11(2928):2928–2934. https://doi.org/10.1063/1.870151
Talote C (2000) Aerodynamic noise: a critical survey. J Sound Vib 231(3):549–562. https://doi.org/10.1006/jsvi.1999.2544
Ffowcs-Willians JE, Hawkings DL (1969) Sound generated by turbulence and surfaces in arbitrary motion. Philos Trans R Soc Lond A 264(1151):321–342. https://doi.org/10.1098/rsta.1969.0031
Inoue O, Hatakeyama N (2002) Sound generation by a two-dimensional circular cylinder in a uniform flow. J Fluid Mech 471:285–314. https://doi.org/10.1017/s0022112002002124
Chae S, Yee K (2010) Helicopter rotor shape optimization for the improvement of aeroacoustic performance in hover. J Aircr 47(5):1170–1783. https://doi.org/10.2514/1.C000283
Heo M-W, Seo T-W, Shim H-S, Kim K-Y (2016) Optimization of a regenerative blower to enhance aerodynamic and aeroacoustic performance. J Mech Sci Technol 30(3):1197–1208. https://doi.org/10.1007/s12206-016-0223-5
Versteeg HK, Malalasekera W (2007) An introduction to computational fluid dynamics. 2nd edn. Pearson Education Ltd., Harlow, ISBN-10: 0131274988
Dowling AP, Ffowcs-Willians JE (1983) Sound and sources of sound. Halsted Press, New York, ISBN 10: 0853125279
Di Francescantonio P (1997) A new boundary integral formulation for the prediction of sound radiation. J Sound Vib 202(4):491–509. https://doi.org/10.1006/jsvi.1996.0843
Lübon C (2013) Turbulent flow modeling using ANSYS fluid dynamics. In: Course at 2013 ESSS Conference & ANSYS Users Meeting
ANSYS Inc. (2013) Advanced ANSYS fluent acoustics. www.ansys.com/customerportal/
Howe MS (1998) Acoustics of fluid–structure interactions. Cambridge University Press, Cambridge, ISBN-10: 0521054281
Deb K, Pratap A, Agarwal S, Meyarivan T (2002) A fast and elitist multi-objective genetic algorithm: NSGA-II. IEEE Trans Evol Comput 6(2):181–197. https://doi.org/10.1109/4235.996017
Wagner CA, Hüttl T, Sagaut P (2007) Large-Eddy simulation for acoustics. Cambridge University Press, Cambridge, ISBN-10: 1107406331
Nogueira LW (2015) Otimização acústica e análise numérica do escoamento ao redor de um conjunto cilindro-placa separadora. MSc dissertation (in Portuguese)
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Jader Barbosa Jr.
Rights and permissions
About this article
Cite this article
Nogueira, L.W., Carmo, B.S. Numerical analysis and acoustic optimization of a detached splitter plate applied for passive cylinder wake control. J Braz. Soc. Mech. Sci. Eng. 40, 37 (2018). https://doi.org/10.1007/s40430-017-0931-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-017-0931-5