Abstract
In the present study, low-cycle fatigue life of a coiled tubing (CT) with a CT-100 steel was evaluated by using various work hardening models. Tensile and low-cycle fatigue tests were performed, and experimental results were used to calibrate material model constants. A nonlinear finite element model was constructed in the ABAQUS program by using a CT fatigue test machine. During the test cycles, bending and straightening conditions were repeated and histories of strains were collected. The multiaxial low-cycle fatigue life was calculated by using Manson–Coffin relation and Tresca criterion. The kinematic and combined hardening models can be used to evaluate the fatigue life of CT, and their results are conservative compared with the fatigue test results. Results of the present study can be used as the basic data in establishing CT fatigue analysis.
Similar content being viewed by others
References
S. M. Tipton, Multiaxial plasticity and fatigue life prediction in coiled tubing, Fatigue Lifetime Predictive Techniques, ASTM STP 1292, 3 (1996) 283–304.
X. Tian, H. Zhang, Q. Duan and Y. Ji, Establishment and application of fatigue life prediction models for coiled tubing, Proc. of the ASME 2015 PVP Conference, PVP2015–45130, Boston, Massachusetts, USA (2015).
K. R. Newman, P. A. Brown and S. Dowell, Development of a stadard coiled–tubing fatigue test, Society of Petroleum Engineers, Proc. of 68th Annual Technical Conference and Exhibition, SPE 26539, Huston, Texas, USA (1993) 303–309
J. A. Bannantine, J. J. Comer and J. L. Handrock, Fundamentals of metal fatigue analysis, Prentice–Hall, Inc., Upper Saddle River, New Jersey, USA (1990).
J. M. Collin, T. Parenteau, G. Mauvoisin and P. Pilvin, Material parameters identification using experimental continuous spherical indentation for cyclic hardening, Computational Material Science, 46 (2009) 333–338.
C. O. Frederick and P. J. Armstrong, A mathematical representation of the multiaxial bauschinger effect, Materials at High Temperatures, 24 (2007) 1–26.
G. H. Koo and J. H. Lee, Investigation of ratcheting characteristics of modified 9Cr–1Mo steel by using the chaboche constitutive model, International Journal of Pressure Vessels and Piping, 84 (2007) 284–292.
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper was presented at ICMR 2017 & QR2MSE 2017, Crowne Plaza Chengdu West, Chengdu, China, October 24–27, 2017. Recommended by Guest Editor Dong Ho Bae.
Tae-Young Ryu received his B.S. and M.S. degrees in the School of Mechanical Engineering, Sungkyunkwan University, Korea in 2010 and 2012, respectively. He is currently a graduate student at the School of Mechanical Engineering, Sungkyunkwan University. His research interests include fracture mechanics and nonlinear plasticity.
Nam-Su Huh received his B.S., M.S. and Ph.D. degrees in Mechanical Engineering from Sungkyunkwan University, Korea, in 1996, 1998 and 2001, respectively. He is currently a Professor at the Department of Mechanical System Design Engineering, Seoul National University of Science and Technology. His research interests include structural integrity assessment based on computational mechanics of materials.
Rights and permissions
About this article
Cite this article
Ryu, TY., Choi, JB., Huh, NS. et al. Effects of work hardening models on low-cycle fatigue evaluations of coiled tubing with CT-100 steel. J Mech Sci Technol 32, 5055–5061 (2018). https://doi.org/10.1007/s12206-018-1001-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-018-1001-3