Abstract
Urethane liquid-applied membrane has been widely used in roof, basement floor, sports arena, etc. for its outstanding elasticity and water-tightness since 1970’s. The embo-tech membrane construction method using the embo-spray coating system for urethane liquid was later developed to prevent slipping, improve durability, and enhance the aesthetic quality of urethane-based floor materials. This paper studied the slip resistance performance of the embo-tech liquid-applied membrane construction method according to the viscosity of the urethane liquid and the diameter of the spray nozzle. The roughness of the embo-membrane samples has been analyzed in the slice image and 3D modeling using X-ray CT. A guideline for selecting the proper viscosity of the urethane liquid and the nozzle diameter to form the optimum embo-pattern has also been presented through roughness analysis. Ultimately, the results of X-ray CT have been verified in the field test using the shoes and tires. This paper suggests optimal construction method using the embo-tech liquid applied membrane construction method and can be used for quantitative evaluations on slip resistance performances of various embo-patterns.
Similar content being viewed by others
References
Bernard, D. and Chirazi, A. (2006). “Numerically enhanced microtomographic imaging method using a novel ring artifact filter.” Advances in X-ray Tomography for Geomaterials, pp. 117–124, DOI: 10.1002/9780470612187.ch6.
Bull, D. J., Helfen, L., Sinclair, I., Spearing, S. M., and Baumbach, T. (2013). “A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage.” Composites Science and Technology, Vol. 75, pp. 55–61, DOI: 10.1016/j.compscitech.2012.12.006.
Chang, W. R. (2004). “Preferred surface microscopic geometric features on floors as potential interventions for slip and fall accidents on liquid contaminated surfaces.” Journal of Safety Research, Vol. 35, No. 1, pp. 71–79, DOI: 10.1016/j.jsr.2003.09.017.
Cnudde, V., Cwirzen, A., Masschaele, B., and Jacobs, P. J. S. (2009). “Porosity and microstructure characterization of building stones and concretes.” Engineering Geology, Vol. 103, No. 3–3, pp. 76–83, DOI: 10.1016/j.enggeo.2008.06.014.
Dai, Q. (2011). “Two-and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images.” Construction and Building Materials, Vol. 25, No. 2, pp. 1102–1114, DOI: 10.1016/j.conbuildmat.2010.06.066.
de Argandoña, V. G. R., Calleja, L., Rodriguez-Rey, Á., del Rio, L. M. S., and Celorio, C. (2009). “X-ray Computed Tomography study of the influence of consolidants on the hydric properties of sandstones for stone conservation studies.” Engineering Geology, Vol. 103, No. 3–3, pp. 69–75, DOI: 10.1016/j.enggeo.2008.06.008.
Dewanckele, J., De Kock, T., Boone, M. A., Cnudde, V., Brabant, L., Boone, M. N., Fronteauc, G., Van Hoorebekeb, L., and Jacobs, P. (2012). “4D imaging and quantification of pore structure modifications inside natural building stones by means of high resolution X-ray CT.” Science of The Total Environment, Vol. 416, pp. 436–448, DOI: 10.1016/j.scitotenv.2011.11.018.
Hadiwardoyo, S. P., Sinaga, E. S., and Fikri, H. (2013). “The influence of Buton asphalt additive on skid resistance based on penetration index and temperature.” Construction and Building Materials, Vol. 42, pp. 5–10, DOI: 10.1016/j.conbuildmat.2012.12.018.
Henrik, Å. and Wallman, C.-G. (2001). Friction measurement methods and the correlation between road friction and traffic safety, VTI Meddelande 911A, Sweden, DOI: urn:nbn:se:vti:diva-4541.
Higo, Y., Oka, F., Sato, T., Matsushima, Y., and Kimoto, S. (2013). “Investigation of localized deformation in partially saturated sand under triaxial compression using microfocus X-ray CTwith digital image correlation.” Soils and Foundations, Vol. 53, No. 2, pp. 181–198, DOI: 10.1016/j.sandf.2013.02.001.
Hiriyannaiah, H. P. (1997). “X-ray computed tomography for medical imaging.” Signal Processing Magazine IEEE, Vol. 14, No. 2, pp. 42–59, DOI: 10.1109/79.581370.
Jacobs, P., Sevens, E., and Kunnen, M. (1995). “Principles of computerised X-ray tomography and applications to building materials.” Science of The Total Environment, Vol. 167, No. 1–3, pp. 161–170, DOI: 10.1016/0048-9697(95)04577-n.
Kim, I. J., Hsiao, H., and Simeonov, P. (2013). “Functional levels of floor surface roughness for the prevention of slips and falls: Cleanand-dry and soapsuds-covered wet surfaces.” Applied Ergonomics, Vol. 44, No. 1, pp. 58–64, DOI: 10.1016/j.apergo.2012.04.010.
Kim, K. Y., Yun, T. S., and Park, K. P. (2013). “Evaluation of pore structures and cracking in cement paste exposed to elevated temperatures by X-ray computed tomography.” Cement and Concrete Research, Vol. 50, pp. 34–40, DOI: 10.1016/j.cemconres.2013.03.020.
Kim, K. Y., Yun, T. S., Choo, J., Kang, D. H., and Shin, H. S. (2012). “Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography.” Construction and Building Materials, Vol. 37, pp. 93–101, DOI: 10.1016/j.conbuildmat. 2012.07.012.
Lee, S. D., Kim, T. W., and Jo, Y. J. (2004). “The effect of contact surface orientation on frictional heat generation.” The Korean Soceity of Tribologists And Lubrication Engineers, pp. 77–82.
Li, L., Gong, M., and Li, D. (2012). “Evaluation of the slip resistance of modified wood decking products.” Construction and Building Materials, Vol. 35, pp. 440–3, DOI: 10.1016/j.conbuildmat.2012.04.015.
Munkholm, L. J., Heck, R. J., and Deen, B. (2012). “Soil pore characteristics assessed from X-ray micro-CT derived images and correlations to soil friability.” Geoderma, Vols. 181-182, pp. 22–29, DOI: 10.1016/j.geoderma.2012.02.024.
Pardillo Mayora, J. M. and Jurado Pina, R. (2009). “An assessment of the skid resistance effect on traffic safety under wet-pavement conditions.” Accident Analysis and Prevention, Vol. 41, No. 4, pp. 881–886, DOI: 10.1016/j.aap.2009.05.004.
Ponikiewski, T., Katzer, J., Bugdol, M., and Rudzki, M. (2014). “Determination of 3D porosity in steel fibre reinforced SCC beams using X-ray computed tomography.” Construction and Building Materials, Vol. 68, pp. 333–340, DOI: 10.1016/j.conbuildmat.2014.06.064.
Somashekar, A. A., Bickerton, S., and Bhattacharyya, D. (2011). “Compression deformation of a biaxial stitched glass fibre reinforcement: Visualisation and image analysis using X-ray micro-CT.” Composites Part A: Applied Science and Manufacturing, Vol. 42, No. 2, pp. 140–150, DOI: 10.1016/j.compositesa.2010.10.017.
Trtik, P., Diaz, A., Guizar-Sicairos, M., Menzel, A., and Bunk, O. (2013). “Density mapping of hardened cement paste using ptychographic X-ray computed tomography.” Cement and Concrete Composites, Vol. 36, pp. 71–77, DOI: 10.1016/j.cemconcomp.2012.06.001.
Wang, D., Chen, X., Yin, C., Oeser, M., and Steinauer, B. (2013). “Influence of different polishing conditions on the skid resistance development of asphalt surface.” Wear, Vol. 308, No. 1–3, pp. 71–78, DOI: 10.1016/j.wear.2013.09.013.
Yoon, C. W., Lee, S. S., Kim, S. R., and Seo, J. W. (2009). “An experimental study and value analysis for performance assessment of the embo-thane membrane waterproofing method.” Korean Journal of Construction Engineering and Management, Vol. 10, No. 5, pp. 123–134, DOI: 10.6106/KJCEM.
Yoon, C. W., Seol, J. N., and Seo, J. W. (2013). “Value analysis of Floor covering methods considering the skid resistance performance.” Korean Journal of Construction Engineering and Management, Vol. 13, No. 2, pp. 58–69, DOI: 10.6106/kjcem.2012.13.2.058.
Zhang, M., He, Y., Ye, G., Lange, D. A., and van Breugel, K. (2012). “Computational investigation on mass diffusivity in Portland cement paste based on X-ray computed microtomography (µCT) image.” Construction and Building Materials, Vol. 27, No. 1, pp. 472–481, DOI: 10.1016/j.conbuildmat.2011.07.017.
Zhang, M. and Jivkov, A. P. (2014). “Microstructure-informed modelling of damage evolution in cement paste.” Construction and Building Materials, Vol. 66, pp. 731–742, DOI: 10.1016/j.conbuildmat.2014. 06.017.
Östman, E. and Persson, S. (1988). “Application of X-ray Tomography in non-destructive testing of fibre reinforced plastics.” Materials & Design, Vol. 9, No. 3, pp. 142–147, DOI: 10.1016/0261-3069(88)90156-2.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yoon, C.W., Seo, J.W., Lee, S.S. et al. Study on the slip resistance of embo-spray coating of urethane-based floor material. KSCE J Civ Eng 21, 76–84 (2017). https://doi.org/10.1007/s12205-016-0897-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-016-0897-3