Abstract
Titanium dioxide (TiO2)/conducting polymers composite pigments were synthesized by chemical oxidative polymerization technique in a simple and eco-friendly manner. These composite pigments were characterized for morphology by scanning electron microscopy and transmission electron microscopy, for conductivity by four point probe and conductive-atomic force microscopy, for elemental composition by X-ray photoelectron spectroscopy, and for chemical composition by Fourier transform infrared spectroscopy. Three different types of composite pigments were synthesized, namely TiO2/polypyrrole composite pigment, TiO2/polypyrrole composite pigment doped with tungstate anion, and TiO2/polyaniline composite pigment. Core and shell morphology was obtained for TiO2/polypyrrole composite pigment and TiO2/polypyrrole composite pigment doped with tungstate anion. Coatings based on these pigments were formulated and applied on a cold rolled steel substrate. Constant immersion in 5% sodium chloride was employed for studying the corrosion resistance offered by composite pigments-based coatings. The corrosion resistance of the coatings was monitored by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization technique. EIS results demonstrated increased corrosion protection for the core and shell TiO2/polypyrrole composite, TiO2/polypyrrole (tungstate doped) composite, and TiO2/polyaniline composite. Additionally, potentiodynamic scan results demonstrated passivation achieved by synthesized composite pigments-based coatings, suggesting improved corrosion protection.
Similar content being viewed by others
References
Hays, GF, “World Corrosion Organization.” In: Eliezer, A (ed.) Corrodia. NACE International, Houston, 2010
Sangaj, NS, Malshe, VC, “Permeability of Polymers in Protective Organic Coatings.” Prog. Org. Coat., 50 (1) 28–39 (2004)
Roberge, P, Corrosion Engineering: Principles and Practice. McGraw-Hill Education, New York, 2008
McCafferty, E, Introduction to Corrosion Science. Springer, New York, 2010
Davis, JR, Corrosion: Understanding the Basics. ASM International, Materials Park, 2000
Ahmad, Z, Principles of Corrosion Engineering and Corrosion Control. Elsevier Science, Oxford, 2006
Cohen, MD, Kargacin, B, Klein, CB, Costa, M, “Mechanisms of Chromium Carcinogenicity and Toxicity.” Crit. Rev. Toxicol., 23 (3) 255–281 (1993)
Hong, SY, Marynick, DS, “Understanding the Conformational Stability and Electronic Structures of Modified Polymers Based in Polythiophene.” Macromolecules, 25 (18) 4652–4657 (1992)
Zor, S, Kandemirli, F, Yakar, E, Arslan, T, “Electrochemical Synthesis of Polypyrrole on Aluminium in Different Anions and Corrosion Protection of Aluminium.” Prot. Met. Phys. Chem. Surf., 46 (1) 110–116 (2010)
Bai, H, Shi, GQ, “Gas Sensors Based on Conducting Polymers.” Sensors, 7 (3) 267–307 (2007)
Smela, E, “Conjugated Polymer Actuators for Biomedical Applications.” Adv. Mater., 15 (6) 481–494 (2003)
Rudge, A, Davey, J, Raistrick, I, Gottesfeld, S, Ferraris, JP, “Conducting Polymers as Active Materials in Electrochemical Capacitors.” J. Power Sources, 47 (1–2) 89–107 (1994)
Chandrasekhar, P, Conducting Polymers, Fundamentals and Applications: A Practical Approach. Springer, New York, 1999
Gurunathan, K, Amalnerkar, DP, Trivedi, DC, “Synthesis and Characterization of Conducting Polymer Composite (PAn/TiO2) for Cathode Material in Rechargeable Battery.” Mater. Lett., 57 (9–10) 1642–1648 (2003)
Hou, JH, Yang, CH, Li, YF, “Synthesis of Regioregular Side-Chain Conjugated Polythiophene and Its Application in Photovoltaic Solar Cells.” Synth. Met., 153 (1–3) 93–96 (2005)
Pei, J, Yu, WL, Huang, W, Heeger, AJ, “A Novel Series of Efficient Thiophene-Based Light-Emitting Conjugated Polymers and Application in Polymer Light-Emitting Diodes.” Macromolecules, 33 (7) 2462–2471 (2000)
Geetha, S, Rao, CRK, Vijayan, M, Trivedi, DC, “Biosensing and Drug Delivery by Polypyrrole.” Anal. Chim. Acta, 568 (1–2) 119–125 (2006)
Tallman, D, Spinks, G, Dominis, A, Wallace, G, “Electroactive Conducting Polymers for Corrosion Control.” J. Solid State Electrochem., 6 (2) 73–84 (2002)
Mengoli, G, Munari, MT, Bianco, P, Musiani, MM, “Anodic Synthesis of Polyaniline Coatings onto Fe Sheets.” J. Appl. Polym. Sci., 26 (12) 4247–4257 (1981)
Deberry, DW, “Modification of the Electrochemical and Corrosion Behavior of Stainless-Steels with an Electroactive Coating.” J. Electrochem. Soc., 132 (5) 1022–1026 (1985)
Wei, Y, Wang, JG, Jia, XR, Yeh, JM, Spellane, P, “Polyaniline as Corrosion Protection Coatings on Cold-Rolled Steel.” Polymer, 36 (23) 4535–4537 (1995)
Ahmad, N, MacDiarmid, AG, “Inhibition of Corrosion of Steels with the Exploitation of Conducting Polymers.” Synth. Met., 78 (2) 103–110 (1996)
Tallman, DE, Pae, Y, Bierwagen, GP, “Conducting Polymers and Corrosion: Polyaniline on Steel.” Corrosion, 55 (8) 779–786 (1999)
Rammelt, U, Nguyen, PT, Plieth, W, “Protection of Mild Steel by Modification with Thin Films of Polymethylthiophene.” Electrochim. Acta, 46 (26–27) 4251–4257 (2001)
Armelin, E, Pla, R, Liesa, F, Ramis, X, Iribarren, JI, Alemán, C, “Corrosion Protection with Polyaniline and Polypyrrole as Anticorrosive Additives for Epoxy Paint.” Corros. Sci., 50 (3) 721–728 (2008)
Baldissera, AF, Ferreira, CA, “Coatings Based on Electronic Conducting Polymers for Corrosion Protection of Metals.” Prog. Org. Coat., 75 (3) 241–247 (2012)
Guimard, NK, Gomez, N, Schmidt, CE, “Conducting Polymers in Biomedical Engineering.” Prog. Polym. Sci., 32 (8–9) 876–921 (2007)
Spinks, G, Dominis, A, Wallace, G, Tallman, D, “Electroactive Conducting Polymers for Corrosion Control.” J. Solid State Electrochem., 6 (2) 85–100 (2002)
Tuken, T, Yazici, B, Erbil, M, “Polypyrrole/Polythiophene Coating for Copper Protection.” Prog. Org. Coat., 53 (1) 38–45 (2005)
Castagno, KRL, Dalmoro, V, Azambuja, DS, “Characterization and Corrosion of Polypyrrole/Sodium Dodecylbenzene Sulfonate Electropolymerised on Aluminum Alloy 1100.” Mater. Chem. Phys., 130 (1–2) 721–726 (2011)
Sharifirad, M, Omrani, A, Rostami, AA, Khoshroo, M, “Electrodeposition and Characterization of Polypyrrole Films on Copper.” J. Electroanal. Chem., 645 (2) 149–158 (2010)
Li, Y, Leung, MY, Tao, XM, Cheng, XY, Tsang, J, Yuen, CWM, “Polypyrrole-Coated Conductive Fabrics as a Candidate for Strain Sensors.” J. Mater. Sci., 40 (15) 4093–4095 (2005)
Jonas, F, Schrader, L, “Conductive Modifications of Polymers with Polypyrroles and Polythiophenes.” Synth. Met., 41 (3) 831–836 (1991)
Jang, JS, Lim, B, Lee, J, Hyeon, T, “Fabrication of a Novel Polypyrrole/Poly(Methyl Methacrylate) Coaxial Nanocable Using Mesoporous Silica as a Nanoreactor.” Chem. Commun., 01 83–84 (2001)
Hosseini, MG, Sabouri, M, Shahrabi, T, “Comparison of the Corrosion Protection of Mild Steel by Polypyrrole–Phosphate and Polypyrrole–Tungstenate Coatings.” J. Appl. Polym. Sci., 110 (5) 2733–2741 (2008)
Khan, M, Chaudhry, AU, Hashim, S, Zahoor, MK, Iqbal, MZ, “Recent Developments in Intrinsically Conductive Polymer Coatings for Corrosion Protection.” Chem. Eng. Res. Bull., 14 (2) 73–86 (2010)
Olad, A, Naseri, B, “Preparation, Characterization and Anticorrosive Properties of a Novel Polyaniline/Clinoptilolite Nanocomposite.” Prog. Org. Coat., 67 (3) 233–238 (2010)
Bahrami Panah, N, Danaee, I, “Study of the Anticorrosive Properties of Polypyrrole/Polyaniline Bilayer via Electrochemical Techniques.” Prog. Org. Coat., 68 (3) 214–218 (2010)
Deshpande, P, Jadhav, N, Gelling, V, Sazou, D, “Conducting Polymers for Corrosion Protection: A Review.” J. Coat. Technol. Res., 11 (4) 473–494 (2014)
Qi, XN, Vetter, C, Harper, AC, Gelling, VJ, “Electrochemical Investigations into Polypyrrole/Aluminum Flake Pigmented Coatings.” Prog. Org. Coat., 63 (3) 345–351 (2008)
Wicks, ZW, Jones, FN, Pappas, SP, Wicks, DA, Organic Coatings: Science and Technology. Wiley, Hoboken, 2007
Hosseini, MG, Bagheri, R, Najjar, R, “Electropolymerization of Polypyrrole and Polypyrrole-ZnO Nanocomposites on Mild Steel and Its Corrosion Protection Performance.” J. Appl. Polym. Sci., 121 (6) 3159–3166 (2011)
Yan, M, Vetter, CA, Gelling, VJ, “Electrochemical Investigations of Polypyrrole Aluminum Flake Coupling.” Electrochim. Acta, 55 (20) 5576–5583 (2010)
Ferreira, CA, Domenech, SC, Lacaze, PC, “Synthesis and Characterization of Polypyrrole/TiO2 Composites on Mild Steel.” J. Appl. Electrochem., 31 (1) 49–56 (2001)
Lenz, DM, Delamar, M, Ferreira, CA, “Application of Polypyrrole/TiO2 Composite Films as Corrosion Protection of Mild Steel.” J. Electroanal. Chem., 540 35–44 (2003)
Mahmoudian, MR, Basirun, WJ, Alias, Y, Ebadi, M, “Synthesis and Characterization of Polypyrrole/Sn-Doped TiO2 Nanocomposites (NCs) as a Protective Pigment.” Appl. Surf. Sci., 257 (20) 8317–8325 (2011)
Mahmoudian, MR, Basirun, WJ, Alias, Y, “Synthesis of Polypyrrole/Ni-Doped TiO2 Nanocomposites (NCs) as a Protective Pigment in Organic Coating.” Prog. Org. Coat., 71 (1) 56–64 (2011)
Rammelt, U, Duc, LM, Plieth, W, “Improvement of Protection Performance of Polypyrrole by Dopant Anions.” J. Appl. Electrochem., 35 (12) 1225–1230 (2005)
He, J, Tallman, DE, Bierwagen, GP, “Conjugated Polymers for Corrosion Control: Scanning Vibrating Electrode Studies of Polypyrrole-Aluminum Alloy Interactions.” J. Electrochem. Soc., 151 (12) B644–B651 (2004)
Paliwoda-Porebska, G, Rohwerder, M, Stratmann, M, Rammelt, U, Duc, L, Plieth, W, “Release Mechanism of Electrodeposited Polypyrrole Doped with Corrosion Inhibitor Anions.” J. Solid State Electrochem., 10 (9) 730–736 (2006)
Sabouri, M, Shahrabi, T, Farid, HR, Hosseini, MG, “Polypyrrole and Polypyrrole-Tungstate Electropolymerization Coatings on Carbon Steel and Evaluating Their Corrosion Protection Performance via Electrochemical Impedance Spectroscopy.” Prog. Org. Coat., 64 (4) 429–434 (2009)
Kamaraj, K, Karpakam, V, Sathiyanarayanan, S, Azim, SS, Venkatachari, G, “Synthesis of Tungstate Doped Polyaniline and Its Usefulness in Corrosion Protective Coatings.” Electrochim. Acta, 56 (25) 9262–9268 (2011)
Rohwerder, M, Michalik, A, “Conducting Polymers for Corrosion Protection: What Makes the Difference Between Failure and Success?” Electrochim. Acta, 53 (3) 1300–1313 (2007)
Jadhav, N, Vetter, CA, Gelling, VJ, “The Effect of Polymer Morphology on the Performance of a Corrosion Inhibiting Polypyrrole/Aluminum Flake Composite Pigment.” Electrochim. Acta, 102 28–43 (2013)
Jadhav, N, Vetter, CA, Gelling, VJ, “Characterization and Electrochemical Investigations of Polypyrrole/Aluminum Flake Composite Pigments on AA 2024-T3 Substrate.” ECS Trans., 41 (15) 75–89 (2012)
Jadhav, N, Gelling, VJ, “Synthesis and Characterization of Micaceous Iron Oxide/Polypyrrole Composite Pigments and Their Application for Corrosion Protection of Cold-Rolled Steel.” Corrosion, 70 (5) 464–474 (2013)
Warren, LF, Walker, JA, Anderson, DP, Rhodes, CG, Buckley, LJ, “A Study of Conducting Polymer Morphology—The Effect of Dopant Anions Upon Order.” J. Electrochem. Soc., 136 (8) 2286–2295 (1989)
Omastova, M, Trchova, M, Kovarova, J, Stejskal, J, “Synthesis and Structural Study of Polypyrroles Prepared in the Presence of Surfactants.” Synth. Met., 138 (3) 447–455 (2003)
Pigoislandureau, E, Nicolau, YF, Delamar, M, “XPS Study of Layer-by-Layer Deposited Polypyrrole Thin-Films.” Synth. Met., 72 (2) 111–119 (1995)
Idla, K, Talo, A, Niemi, HEM, Forsen, O, Ylasaari, S, “An XPS and AFM Study of Polypyrrole Coating on Mild Steel.” Surf. Interface Anal., 25 (11) 837–854 (1997)
Senthil, K, Yong, K, “Growth and Characterization of Stoichiometric Tungsten Oxide Nanorods by Thermal Evaporation and Subsequent Annealing.” Nanotechnology, 18 (39) 395604 (2007)
Golczak, S, Kanciurzewska, A, Fahlman, M, Langer, K, Langer, JJ, “Comparative XPS Surface Study of Polyaniline Thin Films.” Solid State Ionics, 179 (39) 2234–2239 (2008)
Kim, DY, Lee, JY, Kim, CY, Kang, ET, Tan, KL, “Difference in Doping Behavior Between Polypyrrole Films and Powders.” Synth. Met., 72 (3) 243–248 (1995)
Socrates, G, Infrared and Raman Characteristic Group Frequencies: Tables and Charts. Wiley, Chichester, 2004
Shakoor, A, Rizvi, TZ, “Synthesis and Characterization of Polypyrrole Dodecylbenzenesulfonate-Titanium Dioxide Nanocomposites.” J. Appl. Polym. Sci., 117 (2) 970–973 (2010)
Liang, WB, Lei, JT, Martin, CR, “Effect of Synthesis Temperature on the Structure, Doping Level and Charge-Transport Properties of Polypyrrole.” Synth. Met., 52 (2) 227–239 (1992)
Kasisomayajula, SV, Qi, X, Vetter, C, Croes, K, Pavlacky, D, Gelling, VJ, “A Structural and Morphological Comparative Study Between Chemically Synthesized and Photopolymerized Poly(pyrrole).” J. Coat. Technol. Res., 7 (2) 145–158 (2010)
Saravanan, C, Shekhar, RC, Palaniappan, S, “Synthesis of Polypyrrole Using Benzoyl Peroxide as a Novel Oxidizing Agent.” Macromol. Chem. Phys., 207 (3) 342–348 (2006)
Turcu, R, Darabont, AL, Nan, A, Aldea, N, Macovei, D, Bica, D, Vekas, L, Pana, O, Soran, ML, Koos, AA, Biro, LP, “New Polypyrrole-Multiwall Carbon Nanotubes Hybrid Materials.” J. Optoelectron. Adv. Mater., 8 (2) 643–647 (2006)
Wu, T-M, Chang, H-L, Lin, Y-W, “Synthesis and Characterization of Conductive Polypyrrole/Multi-walled Carbon Nanotubes Composites with Improved solubility and Conductivity.” Compos. Sci. Technol., 69 (5) 639–644 (2009)
Li, L, Yan, G, Wu, J, Yu, X, Guo, Q, “Preparation of Polyaniline-Metal Composite Nanospheres by In Situ Microemulsion Polymerization.” J. Colloid Interface Sci., 326 (1) 72–75 (2008)
Mallick, K, Witcomb, MJ, Scurrell, MS, “Directional Assembly of Polyaniline Functionalized Gold Nanoparticles.” J. Phys. Condens. Matter, 19 (19) 196225 (2007)
Rashid, M, Sabir, S, Rahim, AA, Waware, U, “Polyaniline/Palm Oil Blend for Anticorrosion of Mild Steel in Saline Environment.” J. Appl. Chem., 2014 6 (2014)
Ray, S, Easteal, AJ, Cooney, RP, Edmonds, NR, “Structure and Properties of Melt-Processed PVDF/PMMA/Polyaniline Blends.” Mater. Chem. Phys., 113 (2–3) 829–838 (2009)
Chauhan, NPS, Ameta, R, Ameta, R, Ameta, SC, “Thermal and Conducting Behaviour of Emeraldine Base (EB) form of Polyaniline (PANI).” Indian J. Chem. Technol., 18 (2) 118–122 (2011)
Zareh, EN, Moghadam, PN, Azariyan, E, Sharifian, I, “Conductive and Biodegradable Polyaniline/Starch Blends and their Composites with Polystyrene.” Iran. Polym. J., 20 (4) 319–328 (2011)
Kalasad, MN, Gadyal, MA, Hiremath, RK, Ikram, IM, Mulimani, BG, Khazi, IM, Krishnan, SKA, Rabinal, MK, “Synthesis and Characterization of Polyaniline Rubber Composites.” Compos. Sci. Technol., 68 (7–8) 1787–1793 (2008)
Mansfeld, F, “Electrochemical Impedance Spectroscopy (EIS) as a New Tool for Investigating Methods of Corrosion Protection.” Electrochim. Acta, 35 (10) 1533–1544 (1990)
Mansfeld, F, Han, LT, Lee, CC, Zhang, G, “Evaluation of Corrosion Protection by Polymer Coatings Using Electrochemical Impedance Spectroscopy and Noise Analysis.” Electrochim. Acta, 43 (19–20) 2933–2945 (1998)
Bonora, PL, Deflorian, F, Fedrizzi, L, “Electrochemical Impedance Spectroscopy as a Tool for Investigating Underpaint Corrosion.” Electrochim. Acta, 41 (7–8) 1073–1082 (1996)
Zomorodian, A, Brusciotti, F, Fernandes, A, Carmezim, MJ, Moura e Silva, T, Fernandes, JCS, Montemor, MF, “Anti-corrosion Performance of a New Silane Coating for Corrosion Protection of AZ31 Magnesium Alloy in Hank’s Solution.” Surf. Coat. Technol., 206 (21) 4368–4375 (2012)
Muralidharan, V, “Warburg Impedance—Basics Revisited.” Anti-Corros. Methods Mater., 44 (1) 26–29 (1997)
Loveday, D, Peterson, P, Rodgers, B, “Evaluation of Organic Coatings with Electrochemical Impedance Spectroscopy—Part 2: Application of EIS to Coatings.” JCT CoatingsTech, 1 (10) 88–93 (2004)
Krstajic, NV, Grgur, BN, Jovanovic, SM, Vojnovic, MV, “Corrosion Protection of Mild Steel by Polypyrrole Coatings in Acid Sulfate Solutions.” Electrochim. Acta, 42 (11) 1685–1691 (1997)
Sathiyanarayanan, S, Azim, SS, Venkatachari, G, “A New Corrosion Protection Coating with Polyaniline-TiO2 Composite for Steel.” Electrochim. Acta, 52 (5) 2068–2074 (2007)
Sabouri, M, Shahrabi, T, Hosseini, MG, “Improving Corrosion Protection Performance of Polypyrrole Coating by Tungstate Ion Dopants.” Russ. J. Electrochem., 43 (12) 1390–1397 (2007)
Acknowledgments
The authors gratefully acknowledge the support of this research by US Army Research Laboratory under Grant No. W911NF-09-2-0014, W911NF-10-2-0082, and W911NF-11-2-0027.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jadhav, N., Gelling, V. Titanium dioxide/conducting polymers composite pigments for corrosion protection of cold rolled steel. J Coat Technol Res 12, 137–152 (2015). https://doi.org/10.1007/s11998-014-9613-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-014-9613-8