Abstract
Polyacrylate/silica nanocomposite latexes were prepared by silica sol and facilely modified with a silane coupling agent γ-methacryloxypropyltrimethoxysilane (KH-570) aimed at reinforcing the interaction between silica nanoparticles and latex particles in a convenient way. The effects of silica sol and KH-570 amounts on the performance of latexes and films are discussed. Particle size and morphology tests demonstrated that the silica nanoparticles could form hydrogen bond interactions between latex particles, and thus influence the rheological properties of latexes. Tensile measurements and SEM photographs showed the reinforcing and toughening roles of silica nanoparticles. SEM images also indicated that the addition of silica sol increased the roughness of films, which resulted in the increase of hydrophilic silanol groups on the film surface and the decrease of water resistance of latex films. The latex films retained good adhesion force, flexibility, and impact resistance even when the silica sol content was as much as 25%. TGA data revealed that the incorporation of silica sol enhanced the thermal stability of the films. After introducing KH-570, the particle size increased with the increase of the amount of KH-570. Moreover, the addition of KH-570 improved the water resistance and maintained other properties of the latex films appropriately.
Similar content being viewed by others
References
Mahdavian, AR, Ashjari, M, Makoo, AB, “Preparation of Poly(styrene–methyl methacrylate)/SiO2 Composite Nanoparticles via Emulsion Polymerization. An Investigation into the Compatibilization.” Eur. Polym. J., 43 (2) 336–344 (2007)
Lee, J, Hong, CK, Choe, S, Shim, SE, “Synthesis of Polystyrene/Silica Composite Particles by Soap-Free Emulsion Polymerization Using Positively Charged Colloidal Silica.” J. Colloid Interface Sci., 310 (1) 112–120 (2007)
Hajji, P, David, L, Gerard, JF, Pascault, JP, Vigier, G, “Synthesis, Structure, and Morphology of Polymer–Silica Hybrid Nanocomposites Based on Hydroxyethyl Methacrylate.” J. Polym. Sci. Polym. Phys., 37 (22) 3172–3187 (1999)
Percy, MJ, Amalvy, JI, Randall, DP, Armes, SP, “Synthesis of Vinyl Polymer–Silica Colloidal Nanocomposites Prepared Using Commercial Alcoholic Silica Sols.” Langmuir, 20 (6) 2184–2190 (2004)
Zou, H, Wu, SS, Shen, J, “Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications.” Chem. Rev., 108 (9) 3893–3957 (2008)
Ramos-Fernández, JM, Guillem, C, Lopez-Buendía, A, Paulis, M, Asua, JM, “Synthesis of Poly-(BA-co-MMA) Latexes Filled with SiO2 for Coating in Construction Applications.” Prog. Org. Coat., 72 (3) 438–442 (2011)
Watanabe, M, Tamai, T, “Acrylic Polymer/Silica Organic–Inorganic Hybrid Emulsions for Coating Materials: Role of the Silane Coupling Agent.” J. Polym. Sci. Polym. Chem., 44 (16) 4736–4742 (2006)
Chen, YZ, Zhang, ZP, Yu, J, Guo, ZX, “Poly(methyl methacrylate)/Silica Nanocomposite Fibers by Electrospinning.” J. Polym. Sci. Polym. Phys., 47 (12) 1211–1218 (2009)
Zhang, XC, Chen, YZ, Yu, J, Guo, ZX, “Thermoplastic Polyurethane/Silica Nanocomposite Fibers by Electrospinning.” J. Polym. Sci. Polym. Phys., 49 (23) 1683–1689 (2011)
Xue, JM, Tan, CH, Lukito, D, “Biodegradable Polymer–Silica Xerogel Composite Microspheres for Controlled Release of Gentamicin.” J. Biomed. Mater. Res. B, 78B (2) 417–422 (2006)
Silvestri, B, Luciani, G, Costantini, A, Tescione, F, Branda, F, “In-Situ Sol–Gel Synthesis and Characterization of Bioactive pHEMA/SiO2 Blend Hybrids.” J. Biomed. Mater. Res. B, 89B (2) 369–378 (2009)
Guyard, A, Persello, J, Boisvert, JP, Cabane, B, “Relationship Between the Polymer/Silica Interaction and Properties of Silica Composite Materials.” J. Polym. Sci. Polym. Phys., 44 (7) 1134–1146 (2006)
Mahrholz, T, Stängle, J, Sinapius, M, “Quantitation of the Reinforcement Effect of Silica Nanoparticles in Epoxy Resins Used in Liquid Composite Moulding Processes.” Compos. A-Appl. Sci., 40 (3) 235–243 (2009)
Zhang, H, Tang, LC, Zhang, Z, Friedrich, K, Sprenger, S, “Fracture Behaviours of In Situ Silica Nanoparticle-Filled Epoxy at Different Temperatures.” Polymer, 49 (17) 3816–3825 (2008)
Qu, AL, Wen, XF, Pi, PH, Cheng, J, Yang, ZR, “Synthesis of Composite Particles Through Emulsion Polymerization Based on silica/Fluoroacrylate–Siloxane Using Anionic Reactive and Nonionic Surfactants.” J. Colloid Interface Sci., 317 (1) 62–69 (2008)
Pandis, C, Spnoudaki, A, Kyritsis, A, Pissis, P, Hernández, JCR, Ribelles, JLG, Pradas, MM, “Water Sorption Characteristics of Poly(2-hydroxyethyl acrylate)/Silica Nanocomposite Hydrogels.” J. Polym. Sci. Polym. Phys., 49 (9) 657–668 (2011)
Xiong, MN, Wu, LM, Zhou, SX, You, B, “Preparation and Characterization of Acrylic Latex/Nano-SiO2 Composites.” Polym. Int., 51 (8) 693–698 (2002)
Schmid, A, Tonnar, J, Armes, SP, “A New Highly Efficient Route to Polymer–Silica Colloidal Nanocomposite Particles.” Adv. Mater., 20 (17) 3331–3336 (2008)
Zhang, H, Zhang, X, Yang, XL, “Facile Synthesis of Monodisperse Polymer/SiO2/Polymer/TiO2 Tetra-Layer Microspheres and the Corresponding Double-Walled Hollow SiO2/TiO2 Microspheres.” J. Colloid Interface Sci., 348 (2) 431–440 (2010)
Reculusa, S, Mingotaud, C, Bourgeat-Lami, E, Duguet, E, Ravaine, S, “Synthesis of Daisy-Shaped and Multipod-Like Silica/Polystyrene Nanocomposites.” Nano Lett., 4 (9) 1677–1682 (2004)
Reculusa, S, Poncet-Legrand, C, Perro, A, Duguet, E, Bourgeat-Lami, E, Mingotaud, C, Ravaine, S, “Hybrid Dissymmetrical Colloidal Particles.” Chem. Mater., 17 (13) 3338–3344 (2005)
Huang, HZ, Lu, DP, Shen, L, Guan, R, “Reactive Surfactant in the Emulsion Copolymerization of Methyl Methacrylate and Octyl Acrylate.” J. Macromol. Sci. A, 45 (3) 242–247 (2008)
You, B, Wen, NG, Cao, YC, Zhou, SX, Wu, LM, “Preparation and Properties of Polystyrene-co-(butyl acrylate)-co-(acrylic acid)/Silica Nanocomposite Latex Prepared Using an Acidic Silica Sol.” Polym. Int., 58 (5) 519–529 (2009)
Song, XM, Zhao, YL, Wang, HT, Du, QG, “Fabrication of Polymer Microspheres Using Titania as a Photocatalyst and Pickering Stabilizer.” Langmuir, 25 (5) 4443–4449 (2009)
Yin, DZ, Zhang, QY, Yin, CJ, Jia, Y, Zhang, HP, “Effect of Particle Coverage on Morphology of SiO2-Covered Polymer Microspheres by Pickering Emulsion Polymerization.” Colloid Surf. A, 367 (1–3) 70–75 (2010)
Tiarks, F, Landfester, K, Antonietti, M, “Silica Nanoparticles as Surfactants and Fillers for Latexes Made by Miniemulsion Polymerization.” Langmuir, 17 (19) 5775–5780 (2001)
Balmer, JA, Armes, SP, Fowler, PW, “Packing Efficiency of Small Silica Particles on Large Latex Particles: A Facile Route to Colloidal Nanocomposites.” Langmuir, 25 (9) 5339–5347 (2009)
Ni, KF, Shan, GR, Weng, ZX, “Synthesis of Hybrid Core–Shell Nanoparticles by Emulsion (Co)polymerization of Styrene and γ-Methacryloxypropyltrimethoxysilane.” Macromolecules, 38 (17) 7321–7329 (2005)
Manson, JA, Sperling, LH, Polymer Blends and Composites. Plenum, New York (1974)
Qu, AL, Wen, XF, Pi, PH, Cheng, J, Yang, ZR, “Gradient Distribution of Fluorine on the Film Surface of the Organic–Inorganic Hybrid Fluoropolymer.” Colloid Surf. A, 345 (1–3) 18–25 (2009)
Liao, WB, Teng, HP, Qu, JQ, Masuda, T, “Fabrication of Chemically Bonded Polyacrylate/Silica Nanocomposite Films with High Silicon Contents by the Sol–Gel Method.” Prog. Org. Coat., 71 (4) 376–383 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhai, L., Lu, D., Fan, N. et al. Facile fabrication and modification of polyacrylate/silica nanocomposite latexes prepared by silica sol and silane coupling agent. J Coat Technol Res 10, 799–810 (2013). https://doi.org/10.1007/s11998-013-9513-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-013-9513-3