Abstract
A series of polyurethaneurea (PUU) aqueous dispersions either with diethyltoluenediamine (DETDA) or ethylenediamine (EDA) as chain extender were prepared with polyester polyol, isophorone diisocyanate and dimethylol propionic acid (DMPA), and characterized. It was found that the physical properties of the PUU aqueous dispersions prepared with DETDA were similar to or better than those prepared with EDA. Compared with the EDA-extended waterborne PUU films, the water resistance and the mechanical properties of the DETDA-extended waterborne PUU films were enhanced appreciably; these enhancements are attributed to the strong hydrogen bonding in urea carbonyl groups and the ordered structure of hard segments in the systems. The DETDA-extended PUU film with 40 wt.% of hard segment and 4.0 wt.% of DMPA unit showed the lowest water-absorbing amount (2.6 wt.%) over all PUU films studied. The hydrophobic surface of the DETDA-extended PUU film modified with a small amount of aminoethylaminopropyl polydimethylsiloxane (AEAPS) was observed and its hydrophobicity was enhanced by increasing the AEAPS content further.
Similar content being viewed by others
References
Xiao, H, Xiao, HX, Frisch KC, Malwitz N, “Polyurethane-Urea Anionomer Dispersions. II.”J. Macromol. Sci. — Pure Appl. Chem., 32 (2) 169–177 (1995)
Bao, H, Zhang ZP, Yin SK, "Effect of Ionic Group on the Behaviour of Polyurethaneurea Emulsion." Polymer, 37 (13) 2751–2754 (1996)
Hu, YS, Tao, Y, Hu, CP, "Polyurethaneurea/Vinyl Polymer Hybrid Aqueous Dispersions based on Renewable Material." Biomacromolecules, 2 (1) 80–84 (2001)
Yen, MS, Kuo SC, “PCL-PEG-PCL Triblock Ester-Ether Copolydiol-Based Waterborne Polyurethane. II. Effect of NCO/OH Mole Ratio and DMPA content on the Physical Properties.”J. Appl. Polym. Sci., 67 1301–1344 (1998)
Yang, DY, Hu, CP, Ying SK, "Preparation and Characterization of Waterborne Poly(urethane urea) with Well-defined Hard Segments." J. Polym. Sci. Part A: Polym. Chem., 43 2606–2614 (2005)
Chen, H, Jiang, XW, He, L, Zhang, T, Xu, M, Yu, XH, “Novel Biocompatible Waterborne Polyurethane L-lysine as an Extender.” J. Appl. Polym. Sci., 84 2474–2480 (2002)
Yen, MS, Chen, PY, Tsai, HC, “Synthesis, Properties and Dyeing Application of Nonionic Waterborne Polyurethanes with Different Chain Length of Ethyldiamines as the Chain Extender.” J. Appl. Polym. Sci., 90 2824–2833 (2003)
Delpech, MC, Coutinho, FMB, "Waterborne Anionic Polyurethanes and Poly(urethane-urea)s: Influence of the Chain Extender on Mechanical and Adhesive Properties." Polym. Test, 19 939–952 (2000)
Macosko, CW, Fundamentals of Reaction Injection Molding, pp 27–28. Hanser Publishers, Munich, Vienna, New York (1989)
Wu, SH, Polymer Interface and Adhesion, pp 178–181. Marcel Dekker, Inc, New York (1982)
Xu, Q, Jing, H, Hu, CP, Ying, SK, “Particle Size and Morphology of Aqueous Polyurethaneurea-Acrylate Dispersions.” J. Funct. Polym. (in Chinese), 12 (4) 405–408 (1999)
Su, T, Wang, GY, Xu, XD, Hu, CP, "Preparation and Properties of Waterborne Polyurethaneurea Consisting of Fluorinated Siloxane Units." J. Polym. Sci. Part A: Polym. Chem., 44 3365–3373 (2006)
Luo, N, Wang, DN, Ying, SK, "Hydrogen Bonding between Urethane and Urea: Band Assignment for the Carbonyl Region of FTIR Spectrum." Polymer, 37 (14) 3045–3047 (1996)
Wang, GY, Zhu, MQ, Hu, CP, "Interpenetrating Polymer Networks of Polyurethane and Graft Vinyl Ester Resin-polyurethane Formed with Diphenylmethane Diisocyanate." J. Polym. Sci. Part A: Polym. Chem., 38 136–144 (2000)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jiang, L., Chen, Y.L. & Hu, C.P. Polyurethaneurea aqueous dispersions prepared with diethyltoluenediamine as chain extender. J Coat Technol Res 4, 59–66 (2007). https://doi.org/10.1007/s11998-007-9010-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-007-9010-7