Abstract
The DTS water-cooled hood system provides a hood design that can be used on Peirce-Smith converters or similar furnace vessels to allow converter off-gas systems to operate at higher temperatures. The system, which uses only one control valve, uses a closed-circuit cooling water system for lowpumping costs and minimal opportunity for oxygen entrainment in the water. An aircooled converter hood can be replaced by a DTS water-cooled system during the rebricking shut down, meaning retrofit installation does not interfere with production.
Similar content being viewed by others
References
F.C. Gunther, “Photographic Study of Surface-Boiling Heat Transfer to Water with Forced Convection,” ASME-Transactions.
“Water-Cooled Jacket System for Waste Gases Containing SO2” (Koseka Smelting and Refining Co. Ltd.).
Author information
Authors and Affiliations
Additional information
For more information, contact J. Deakin at H.G. Engineering, 400 Carlington Drive, Toronto, Canada M9W 5X9, (416) 674-8505; fax (416) 674-8520; e-mail Johnd@hgeng.com.
Rights and permissions
About this article
Cite this article
Drummond, W., Deakin, J. A water-cooled hood system for Peirce-Smith converters and similar furnace vessels. JOM 51, 40–41 (1999). https://doi.org/10.1007/s11837-999-0041-7
Issue Date:
DOI: https://doi.org/10.1007/s11837-999-0041-7