As the two typical structural paper packaging materials, corrugated fiberboard and honeycomb paperboard occupy an important position in the field of logistics packaging. Up to now, numerous studies were focused on the properties of the above sandwich paperboards. However, the issue of their edgewise compressive strength has reached no consensus yet. The objective of this study is to investigate the edge effect and the influence on edgewise compressive strength of the two sandwich paperboards by experimental and numerical simulation methods. Firstly, the standard size specimens of the two sandwich paperboards were made based on the machining direction (MD) and cross-machining direction (CD), and the edgewise compressive strength experiments were carried out. Secondly, the finite element models of corrugated fiberboard and honeycomb paperboard were constructed using the same material, comprehensive weight and thickness, while the numerical assessment on edgewise compressive strength of CD and MD of the models were analyzed, respectively. Finally, measures to restrain the edge effect were taken, and the edge enhancement finite element models of the two paperboards were eleborated. The buckling analysis was carried out based on the numerical method. The results obtained suggest that the edge effect is one of the major factors controlling the edgewise compression strength of corrugated fiberboard and honeycomb paperboard.
Similar content being viewed by others
References
G. X. Peng and Y. F. Guo, Logistics Transportation Packaging Design, 2nd edition, Printing Industry Press (2014).
H. Z. Xiong, Comparative Study on Mechanical Properties of Honeycomb Paperboard and Corrugated Board, Beijing Technology and Business University (2001).
H. W. Ji, G. L. Xu, J. C. Li, et al., “Experimental research on the edgewise compressive strength of honeycomb paperboard,” Packag. Eng., 27, 90–91 (2006).
D. Q. Sun, Finite Element Structural Analysis and Design Method of Porous Cushioning Materials, Chemical Industry Press (2014).
L. L. Hu and T. X. Yu, “Dynamic crushing strength of hexagonal honeycombs,” Int. J. Impact Eng., 37, No. 5, 467–474 (2010).
G. J. Hua and Y. Xie, “Finite element analysis of honeycomb and corrugated fiberboard side compression strength,” Packag. Eng., 30, 1–2 (2009).
G. J. Hua, D. T. Luo, and R. M. Wu, “Simulation analysis of corrugated board strength based on buckling criteria,” Packag. J., 2, 18–20 (2010).
Z. S. Liao, G. J. Hua, Y. Xie, et al., “Finite element analysis on transverse compressive strength of corrugated board edge,” Packag. Eng., 35, 56–60 (2014).
Z. W. Wang and Z. Yao, “Experimental investigation and finite element analysis for impact compression of honeycomb paperboards,” J. Mech. Eng., 48, 49–55 (2012).
S. Gao and B. Z. Wang, “Finite element analysis of double deck honeycomb board based on ANSYS,” Mech. Eng. Automat., 14, 69–71 (2012).
Acknowledgments
The work is supported by Science and Technology Project of Hunan Province (Grant No. 2015JC3114) and Teaching Reform Project of Hunan Province (Grant No. 2015-291-308).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Problemy Prochnosti, No. 1, pp. 210 – 219, January – February, 2017.
Rights and permissions
About this article
Cite this article
Hua, G.J., Shen, Y., Zhao, D. et al. Experimental and Numerical Analysis of the Edge Effect for Corrugated and Honeycomb Fiberboard. Strength Mater 49, 188–197 (2017). https://doi.org/10.1007/s11223-017-9857-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-017-9857-5