Abstract
Castings of high-strength iron are use very widely. The range of automobile parts cast from iron with globular graphite is widening. It includes crankshafts and camshafts, flywheels, crankcases, various engine parts, etc. In order to increase hardness of the surface layer, the wear resistance, and the service life of parts made of high-strength cast iron, they are often subjected to nitriding. The present work is aimed at studying the nitriding process for parts made of VCh70 and VCh85 high-strength cast iron.
Similar content being viewed by others
References
Yu. M. Lakhtin and Ya. D. Kogan,Nitriding of Steel [in Russian], Mashinostroenie, Moscow (1976).
Yu. M. Lakhtin and Ya. D. Kogan,The Theory and Technology of Nitriding [in Russian], Metallurgiya, Moscow (1991).
R. Chatterjee-Fischer, F.-V. Eizell, et al.,Nitriding and Carbonitriding [Russian translation], Metallurgiya, Moscow (1990).
A. K. Tikhonov and N. V. Bogdanova, “Short-duration gas nitriding of parts for VAZ automobiles,”Metalloved. Term. Obrab. Met., No. 10, 11–15 (1996).
“Short-duration nitriding with and without carburizing additives,” in:Rep. Aichelin (1986).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 10, pp. 29–30, October, 1998.
Rights and permissions
About this article
Cite this article
Starostin, V.N., Pytyaeva, E.I. & Pershina, V.V. Short-duration gas nitriding of parts made of high-strength cast iron in the gaz joint-stock company. Met Sci Heat Treat 40, 421–422 (1998). https://doi.org/10.1007/BF02468252
Issue Date:
DOI: https://doi.org/10.1007/BF02468252