Abstract
In earlier Chapters the principles and processing involved in the various industrially exploited methods of carbon-carbon manufacture have been discussed. The aim of this Chapter is to detail the production, testing and evaluation of the materials on a laboratory scale for research purposes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Pioneer Gasket Inc., Salt Lake City, Utah, USA.
Savage, G. M. (1985) PhD Thesis, Univ. London.
Savage, G. M. and Williamson, J.,Submitted to J. Mat. Sci.
Wegman R. F. (1989) Non destructive test methods for structural composites, in SAMPE Handbook, 1, Covina, Ca, USA.
Belbin, G. R. (1984) Proc. I. Mech. E. 198, 47.
Gibbs, H. H. (1984) SAMPE J., 20, 37.
McAllister, L. E. and Taverna, A. R. (1971) Proc. Am. Ceram. Soc. 73rd Ann. Mtg.,Chicago.
McAllister, L. E. and Taverna, A. R. (1976) Proc. Int. Conf. on Comp. Mats, 1, Met. Soc. AIME,New York, p. 307.
Mullen, C. K. and Roy, P. J. (1972) Proc. 17th Nat. SAMPE Symp., p. iii—A- 2, AZ, USA.
Dietric, H. and McAllister, L. E. (1978) Proc. Am. Ceram. Soc. 80th Ann. Mtg.,Detroit.
Gray, G. and Savage, G. M. (1989) Metals and Materials Sept.,513.
Chard, W., Conaway, M. and Neisz, D. (1974) in Petroleum Derived Carbons, 21, (eds M. L. Deviney and T. M. O’Grady), ACS Symp. Series, Ann. Chem. Soc., Washington DC, p. 155.
Gray, G., Hunter, A., Payne, R. S. and Savage, G. M. (1990) Met. Pwdr Rpt., 45 (4), 290.
Gray, G. and Savage, G. M. (1991) High Temperature Technology (Butter-worths),9(2) May, 102.
ASTM (1987) ASM Standards and Literature References for Composite Materials, ASTM, Philadelphia, Pa, USA.
Curtis, P. J. (ed.) (1988) Crag Test Methods for the Measurement of the Engineering Properties of Fibre Reinforced Plastics,RAE Tech. Rpt 88012, Farnborough.
BS 1610 Br. Std Inst., (1989) London.
Student Manual for Strain Gauge Technology, Bull. 309, Measurements Group, PO Box 27777, Raleigh, N. Carolina, USA.
Hysol Division, The Dexter Corporation, Pittsburg, California, USA.
Whitney, J. M., Daniel, I. M. and Pipes, R. B. (1984) Experimental Mechanics of Fibre Reinforced Composite Materials, rev. edn, Soc. for Exp. Mech., Prentice-Hall, Englewood Cliffs, New Jersey.
Pipes, R. B. and Pagano, N. J. (1972) J. Comp. Mat., 4, 538.
Wilkins, D. J., Eisenmann, J. R., Canin, R. A., Margolic, W. S. and Benson, J. W. (1980) ASTM STP 775.
Delmonte, J. (1981) Technology of Carbon and Graphite Fibre Composites,van Nostrand Reinhold, New York.
Iosipescu, J. (1967) J. of Materials, 2, 537.
Kumosa, M. and Hull, D. (1987) Int. J. Fracture, 35, 83.
Charles, J. A. and Crane, F. A. A. (1989) Selection and Use of Engineering Materials, Butterworths, Harlow.
Gotham, K. V. (1969) Plastics and Polymers, 37, 309.
Turner, S. (1983) Mechanical Testing of Plastics 2nd edn, George Goodwin.
Guess, T. R. and Hoover, W. R. (1973) J. Comp. Mats., 7, 2.
Wu, E. M. (1968) Comp. Mats Workshop Techronic.
Outwater, J. O. and Murphy, M. S. (1969) Proc. 24th Ann. Tech. Conf. Reinforced Plastics,Comp. Div. Soc. of Plastics Ind., Sect. 11-C, p. 1.
Kim, H. C., Yoon, K. J., Pickering, R. and Sherwood, P. J. (1985) J. Mat. Sci., 20, 3967.
Savage, G. M. Submitted to J. Mat. Sci.
Brown, W. F. Jr (1970) ASTM STP 463.
Brown, W. F. Jr and Srawley, J. E. (1968) ASTM STP 410.
Tattersal, H. G. and Tappin, G. (1966) J. Mat. Sci., 1, 296.
Russell, A. J. and Street, K. N. (1982) Proc. ICCM-IV Bordeaux,p. 279.
Wilkins, D. J. (1982) ASTM STP 775, 168.
Amaral, J. E. and Pollock, C. N. (1989) in Mechanical Testing of Engineering Ceramics at High Temperatures (eds B. F. Dyson, R. D. Lohr and R. Morrell), Elsevier App. Sci. Pub., London, p. 51.
Loveday, M. S., Day, M. F. and Dyson, B. F. (eds) (1982) Measurement of High Temperature Mechanical Properties of Materials, HMSO, London.
Liu, K. C. and Brinkman, C. R. (1985) Proc. 23rd Automotive Technology Development Contractors’ Meeting, SAE, Detroit, p. 279.
Vaidyanthan, R., Shankar, J. and Avva, V. S. (1987) Proc. 25th Automotive Technology Development Contractors’ Coordination Meeting, SAE, Detroit, p. 175.
Herrmansson, L., Adlerborn, J. and Burstrom, D. ASEA CERAMA AB, company literature.
Gouila, R. K. (1983) J. Mat. Sci., 18, p. 307.
Sheshadri, S. G. and Chia, K. Y. (1987) J. Am. Ceram. Comm., 70 (10), 242.
Gyekenesi, J. Z. and Herrman, J. H. NASA Contractor Rpt 180888.
Mandell, J. F., Grade, D. H. and Dannerman, K A (1986) Proc ASTM Symp.,Phoenix Ariz. USA, 3–4 Nov.
Markovic, V., Ragan, S. and Marsh, H. (1984) J. Mat. Sci., 19, 3287.
Forrest, M. A. and Marsh, H. (1981) Proc. Biennial Conf on Carbon, Am. Carbon Soc., Univ. Pennsylvania, Philadelphia.
Kowbel, W. and Don, J. (1989) J. Mat. Sci., 24, 133.
Wicks, B. J. (1971) J. Mat. Sci., 16, 173.
Oberlin, A. (1982) J. Mat. Sci., 23, 7.
Johnson, D. J. and Crawford, D. (1973) J. Mat. Sci., 8, 286.
Badami, D. V., Joiner, J. C. and Jones, G. A. (1967) Nature, 215, 386.
Weizhou, P., Tianyou, P., Hanmin, Z. and Qias, Yu (1988) Proc. Int. Conf. Compos. Interfa,Elsevier, p. 399.
Sibilia, J. (ed.) (1988) A Guide to Materials Characterization and Chemical Analysis, VCH Publishers, Weinheim, Germany.
Eckert, E. R. G. and Irvine, T. F. (eds) (1977) Progress in Heat and Mass Transfer, 8 Pergamon Press, Oxford.
Rights and permissions
Copyright information
© 1993 G. Savage
About this chapter
Cite this chapter
Savage, G. (1993). Laboratory scale production and evaluation of carbon-carbon. In: Carbon-Carbon Composites. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1586-5_7
Download citation
DOI: https://doi.org/10.1007/978-94-011-1586-5_7
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4690-9
Online ISBN: 978-94-011-1586-5
eBook Packages: Springer Book Archive