Damage and Fracture Mechanics

1. Front Matter

   Pages i-xxv

   PDF

2. Determination of the Hardness of the Oxide Layers of 2017A Alloys

   • Chahinez Fares, Taoufik Boukharouba, Mohamed El Amine Belouchrani, Abdelmalek Britah, Moussa Naït Abdelaziz

   Pages 1-10

3. Effect of Non-Metallic Inclusions on Hydrogen Induced Cracking

   • Mimoun Elboujdaini, Winston Revie

   Pages 11-18

4. Defect Assessment on Pipe Transporting a Mixture of Natural Gas and Hydrogen

   • Guy Pluvinage

   Pages 19-32

5. Reliability Analysis of Low Alloy Ferritic Piping Materials

   • A. Guedri, B. Merzoug, Moe Khaleel, A. Zeghloul

   Pages 33-42

6. Experimental Characterization and Effect of the Triaxiality on the Behavior of the HDPE

   • K. Hachour, R. Ferhoum, M. Aberkane, F. Zairi, M. Nait Abdelaziz

   Pages 43-48

7. Effects of Aggressive Chemical Environments on Mechanical Behavior of Polyethylene Piping Material

   • Souheila Rehab-Bekkouche, Nadjette Kiass, Kamel Chaoui

   Pages 49-57

8. Hydrogen Embrittlement Enhanced by Plastic Deformation of Super Duplex Stainless Steel

   • A. Elhoud, N. Renton, W. Deans

   Pages 59-67

9. Hydrogen Effect on Local Fracture Emanating from Notches in Pipeline Steels

   • Julien Capelle, Igor Dmytrakh, Joseph Gilgert, Guy Pluvinage

   Pages 69-82

10. Reliability Assessment of Underground Pipelines Under Active Corrosion Defects

    • A. Amirat, A. Benmoussat, K. Chaoui

    Pages 83-92

11. An Overview of the Applications of NDI/NDT in Engineering Design for Structural Integrity and Damage Tolerance in Aircraft Structures

    • A. M. Abdel-Latif

    Pages 93-100

12. Improvement in the Design of Automobile Upper Suspension Control Arms Using Aluminum Alloys

    • M. Bouazara

    Pages 101-112

13. Performances of Vehicles'Active Suspensions

    • Nadhira Kheznadji Messaoud-Nacer

    Pages 113-120

14. Damaging Influence of Cutting Tools on the Manufactured Surfaces Quality

    • Idriss Amara, Embarek Ferkous, Fayçal Bentaleb

    Pages 121-130

15. Design and Test of a Sandwich T-Joint for Naval Ships

    • Lotfi Hamitouche, Mostapha Tarfaoui, Alain Vautrin

    Pages 131-141

16. Vibroacoustic Sources Identification of Gear Mechanism Transmission

    • Abbassia Derouiche, Nacer Hamzaoui, Taoufik Boukharouba

    Pages 143-152

17. Prediction of Structural and Dynamic Behaviors of Impacted Plates

    • Abdelhamid Miloudi, Mahmoud Neder

    Pages 153-162

18. Application of Structural INTegrity Assessment Procedure to Nuclear Power Plant Component

    • Nenad Gubeljak, Jozef Predan

    Pages 163-172

19. Failure Assessment Diagrams in Structural Integrity Analysis

    • Yu. G. Matvienko

    Pages 173-182

20. Degradation and Failure of Some Polymers (Polyethylene and Polyamide) for Industrial Applications

    • Boubaker Bounamous, Kamel Chaoui

    Pages 183-194

The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.

• Metall
• Polyamid
• Sand
• alloy
• concrete
• crystal
• engineering design
• fatigue
• finite element method
• fracture mechanics
• modeling
• nanomaterial
• polymer
• reinforced concrete

• Dépt. Génie M canique & Productique, Université des Sciences et de la Technologie Houari Boumediene (USTHB), El Alia, Algeria

  Taoufik Boukharouba

• Natural Resources Canada CANMET, Materials Technology Lab., Ottawa, Canada

  Mimoun Elboujdaini

• Université Paul Verlaine — Metz, Metz, France

  Guy Pluvinage

Policies and ethics