Abstract
Though the cylinder shape is similar, the shape of the cylinder changes from model to model. Therefore the time consuming procedure of forming cylinder should be repeated for every type of cylinders. Consequently, a new design system is highly demanded to reduce those undesirable time. In this study a 3-D cylinder design supporting system has been developed using Pro/PROGRAM of the widespread CAD software Pro/ENGINEER. With the input geometric data of piston, tube, cover, this 3-D design supporting system could complete the basic design process. This new design system showed remarkable design efficiency also when it was applied to the case of redesign and modification of the previous standard output for a different cylinder type.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Jung, H.S.: A Study on the Automatic Supporting System for Automobile Bonnet Tools. Doctoral thesis. Konkuk University, Republic of Korea (2003)
Kim, D.J.: A Study on the Automatic Supporting System for Automobile Heming Tools. Doctoral thesis. Konkuk University, Republic of Korea (2003)
G.S. Kim.: A study on the Automatic Design of Press Dies using ObjectARX. Master’s thesis. Konkuk University, Republic of Korea (2000)
Lee, S.J.: A Study on the design Supporting System for Press Die of Automobile Panels. Doctoral thesis, Konkuk University, Republic of Korea (2006)
Tae Sung Software & Engineer Fea Departure, Ansys Workbench escaping from king elements. SIGMA press (2007)
SMC Korea, http://www.smckorea.co.kr/
Tpc Gongdan Press Company, http://www.tpc4u.com/
ShynYeoung Mechatronics, http://www.sym21.com/
TPC Mechatronics, http://www.tpc.or.kr/
Esposito, A.: Fluid Power with Applications. Pearson Education And Scitech Media Inc. (2004)
White, F.M.: Fluid Mechanics, 5th edn. McGraw-Hill, Korea (2003)
Pro|ENGINEER Master Guide Book, uniDESK (2005)
Choi, K.W., Park, B.K.: Pro|Engineer wildfire basic I, II, Kijeon Study corporation (2006)
Anglin, D.L., Crouse, W.H.: Automative Mechanics. Intervision (2004)
Henault, M., Sevrence, S., Walraven, M., Karam, F., Motkowski, G.: Automating Design in Pro/Engineer with Pro/PROGRAM. ONWORD press (1997)
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2008 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Lee, S.S., Kim, C.W., Kim, K.T., Lee, N.K., Park, K.S. (2008). A Study on the Design Supporting System for Cylinder Using Pro/PROGRAM. In: Gervasi, O., Murgante, B., Laganà, A., Taniar, D., Mun, Y., Gavrilova, M.L. (eds) Computational Science and Its Applications – ICCSA 2008. ICCSA 2008. Lecture Notes in Computer Science, vol 5072. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-69839-5_44
Download citation
DOI: https://doi.org/10.1007/978-3-540-69839-5_44
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-69838-8
Online ISBN: 978-3-540-69839-5
eBook Packages: Computer ScienceComputer Science (R0)