Abstract
This chapter describes the performance analysis of different concentrating technologies through experimental and numerical modeling activities. Two solar thermal systems with different designs and, accordingly, different concentration ratios have been studied. The first solar device is a stationary compound parabolic concentrator (CPC) collector: it is provided with truncated or full CPC reflectors and evacuated tubes. Each evacuated tube is composed of an outer glass envelope and a glass absorber with selective coating in thermal contact, via absorber fin, with a U-shaped channel for the liquid flow. The second system is a parabolic trough concentrator (PTC) with two-axis solar tracking: the primary optics consists of a segment of parabolic cylinder which concentrates the direct normal irradiance (DNI) on a linear receiver. In this system, two types of flat receivers have been tested. One receiver has been designed for thermal energy extraction, and it consists of a canalized roll-bond plate provided with a semi-selective coating. The other receiver has been designed for cogeneration of electricity and heat (CPVT), and it is equipped with triple-junction photovoltaic cells, which are actively cooled by an aluminum roll-bond heat exchanger. The performance of the described collectors has been experimentally characterized at the Solar Energy Conversion Laboratory of the University of Padova (45.4°N, 11.9°E), Italy. The collectors have also been mathematically modeled, and the numerical data have been validated against the experimental measurements.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Foster R, Ghassemi M, Cota A, Energy S (2010) Renewable energy and the environment CRC Press, Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL, pp 33487–32742
Hsieh CK (1981) Thermal analysis of CPC collectors. Sol Energy 27(1):19–29
Kumar R, Kaushik SC, Garg HP, Vatsa N (1999) Numerical analysis of a tubular solar collector with cusp reflectors. Int J Ambient Energy 20(3):149–158
Kim JT, Ahn HT, Han H, Kim HT, Chun W (2007) The performance simulation of all-glass vacuum tubes with coaxial fluid conduit. Int Commun Heat Mass Transf 34(1):587–597
Rabl A (1975) Comparison of solar concentrators. Sol Energy 18(1):93–111
Kim YS, Balkoski K, Jiang L, Winston R (2013) Efficient stationary solar thermal collector systems operating at a medium-temperature range. Appl Energy 111(1):1071–1079
Zambolin E, Del Col D (2012) An improved procedure for the experimental characterization of optical efficiency in evacuated tube solar collectors. Renew Energy 43(1):37–46
Soriga I, Neaga C, 2012 Thermal analysis of a linear Fresnel lens solar collector with black body cavity receiver, U.P.B. Sci. Bull., Series D, vol. 74, no. 4, ISSN 1454-2358
Rabl A (1976) Optical and thermal properties of compound parabolic concentrators. Sol Energy 18(1):497–511
National Renewable Energy Laboratory (NREL) (2012) SolTrace version 2012.7.9. http://www.nrel.gov/csp/soltrace. Accessed Jan 2014
Comité Européen de Normalisation (CEN) (2006) EN 12975-2: Thermal solar systems and components—solar collector—part 2: test methods, Brussels, Belgium
Zamboiln E, Del Col D (2010) Experimental analysis of thermal performance of flat plate and evacuated tube solar collectors in stationary standard and daily conditions. Sol Energy 84(1):1382–1396
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Bortolato, M., Aboulmagd, A., Padovan, A., Del Col, D. (2016). Solar Thermal Collectors with Low and High Concentration. In: Sayigh, A. (eds) Renewable Energy in the Service of Mankind Vol II. Springer, Cham. https://doi.org/10.1007/978-3-319-18215-5_63
Download citation
DOI: https://doi.org/10.1007/978-3-319-18215-5_63
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-18214-8
Online ISBN: 978-3-319-18215-5
eBook Packages: EnergyEnergy (R0)