Abstract
A novel multi-resonator using slotted complementary split ring resonator (CSRR) on planar transmission line is proposed for the design of chip-less RFID tag. The 4 bit multi resonator is operates from 4 to 5 GHz. The tag consists of a micro strip open stub resonators and two UWB monopole antennas. The 65 mm × 50 mm chip-less RFID tag is designed on a Taconic substrate with permittivity of 2.75. In the end, the chip-less tag has a 8-bit—data capacity are designed in the range of 4–5.8 GHz.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahsan, K., Shah, H., Kingston, P.: RFID applications: an introductory and exploratory study. IJCSI: Int. J. Comput. Sci. Issues 7(1) 3 (2010)
Lee, W.-S., Jang, H.-S., Lee, W.-S., Oh, K.-S., Yu, J.-W.: Design of near-field chipless RFID tags and reader based on transmission line. In: Microwave Conference Proceedings (APMC), Asia-Pacific (2013)
Bhuiyan, M.S., Azad, A., Karmakar, N.: Dual-band modified complementary split ring resonator (MCSRR) based multi-resonator circuit for chipless RFID tag .In: 2013 IEEE Eighth International Conference on Intelligent Sensors, Sensor Networks and Information Processing (2013)
Bhuiyan, M.S.; Karmakar, N.: Chipless RFID tag based on split-wheel resonators. In: 7th European Conference on Antennas and Propagation (EuCAP) (2013)
Jalil, M.E., Kamal, M., Rahim, A., Samsuri, N.A., Dewan, R.: Chipless RFID Tag based on meandered line resonator. In: IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) (2014)
Sum, M., Dinesh, R., Nijas, C.M., Mridula, S., Mohanan P.: Frequency coded chipless RFID tag using spurline resonator. Radioengineering 23, 203 (2014)
Baena, J.D., Bonache, J., Martín, F., Sillero, R.M., Falcone, F., Lopetegi, T., Laso, M.A.G., García–García, J., Gil, I., Portillo, M.F., Sorolla, M.: Senior, equivalent-circuit models for split-ring resonators and complementary split-ring resonators coupled to planar transmission lines. IEEE Trans. Microw. Theory Tech. 53(4), 1451 (2005)
Acknowledgments
This work was supported by Ministry of Higher education (MOHE), Research Management Centre (RMC), Universiti Teknologi Malaysia (UTM JB) Johor Bahru, under research grant no. 05H35, 04H38, 4F360 and 4L811.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Jalil, M.E.B., Rahim, M.K.A., Samsuri, N.A., Dewan, R. (2015). Multi-resonator Using Complementary Split Ring Resonator for Chip-Less RFID Application. In: Sulaiman, H., Othman, M., Abd. Aziz, M., Abd Malek, M. (eds) Theory and Applications of Applied Electromagnetics. Lecture Notes in Electrical Engineering, vol 344. Springer, Cham. https://doi.org/10.1007/978-3-319-17269-9_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-17269-9_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-17268-2
Online ISBN: 978-3-319-17269-9
eBook Packages: EngineeringEngineering (R0)