Abstract
In this paper, a method for measuring the grounding resistance of the tower without disconnecting all the down conductors is proposed for the first time in view of the shortage of manual measurement of the grounding resistance of the tower. This paper introduces the measurement model of single or multiple down conductors, and uses a hybrid genetic algorithm to comprehensively calculate the grounding resistance of all towers in the closed loop, which greatly improves the measurement accuracy. Through simulation analysis and actual measurement, it proves that the method is simple and convenient to measure, does not need to disconnect the grounding wire, and has high measurement accuracy. Compared with the clamp ammeter method, the accuracy is improved by 30%. The method is applied to the on-line monitoring system of the tower grounding resistance, which can reduce the labor intensity of the line maintenance personnel, greatly improve the work efficiency and provide a basis for discovering the fault in time.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lin, J.: Three - pole method and clamp - meter method for measuring earthing resistance of transmission line. Electr. Eng. Autom. 30, 1–2 (2016)
Liao, F., Huang, W.: Study on new model and test method of ground parameter of line pole tower. Power Electr. Eng. 29(4), 1–4 (2009)
Xu, W., Li, X.: Based on ATP-EMTP, the calculation model of impact grounding resistance of tower ground body. Electr. Power Constr. 31(5), 22–25 (2010)
Wu, H.: Accurate measurement method and experimental study of earthing resistance of poles and towers, pp. 1–2. Chongqing University (2016)
Wu, Y., Xie, B.: Effect of the length of the test line on the measurement of grounding resistance by potential drop method. New Technol. New Prod. China 1(2), 32–33 (2016)
Yang, M.: Research on measurement method of ground resistance of transmission line poles and towers. New Technol. New Prod. China (9), 78 (2015)
Jia, C., Hu, Z.: Measurement of grounding resistance of grounding grid by multiple synchronous frequency. Power Autom. Equip. (4), 167–172 (2015)
Zhou, Q.: Comparison and analysis of ground resistance measurement of two commonly used transmission line poles and towers. Electr. Measur. 12(9), 48–49 (2012)
Galliana, F., Capra, P.P.: Traceable technique to calibrate clamp meters in AC current from 100 to 1 500 A. IEEE Trans. Power Syst. 61(9), 2512–2513 (2012)
Guo, K.: Study on measuring method of ground resistance of transmission line tower, pp. 11–15. North China Electric Power University (2008)
Tian, Q., Gu, Z.: Solving nonlinear equations based on hybrid genetic algorithm. Comput. Technol. Dev. 17(3), 10–12 (2007)
Xing, H., He, G.: Application of hybrid genetic algorithm in ground resistance measurement. J. Electro. Measur. Instrum. 30(9), 1389–1396 (2016)
Li, J., Wang, Y.: Fast convergence of hybrid genetic algorithm. Comput. Eng. Des. 35(2), 686–689 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Zhang, G., Wang, M., Wang, X., Zhao, L., Zhao, J. (2019). An On-line Monitoring Method for Monitoring Earth Grounding Resistance Based on a Hybrid Genetic Algorithm (Short Paper). In: Gao, H., Wang, X., Yin, Y., Iqbal, M. (eds) Collaborative Computing: Networking, Applications and Worksharing. CollaborateCom 2018. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 268. Springer, Cham. https://doi.org/10.1007/978-3-030-12981-1_41
Download citation
DOI: https://doi.org/10.1007/978-3-030-12981-1_41
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-12980-4
Online ISBN: 978-3-030-12981-1
eBook Packages: Computer ScienceComputer Science (R0)