Abstract
The need to recycle and reuse timber is outlined in this chapter. The chapter considers the effects of preservative, how to deal with metal nails in timber, effective timber strength grading, and finally cost versus sustainability. Various uses of reclaimed timber are outlined and a summary of the important criteria for timber reclamation is provided. Timber reclaimed and recycled from demolition can be a viable and environmentally efficient commodity that can be reused effectively, both structurally and, as processed, in other forms.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
British Standards Institution (2011). BS EN 14081: 2011 Strength graded structural timber with rectangular cross section. London: BSI.
British Standards Institution (2009). BS EN 338:2009 Structural timber. Strength classes. London: BSI.
British Standards Institution (2008). BS EN 1995-1-1: 2004+A1 Eurocode 5. Design of timber structures. General. Common rules and rules for buildings. London: BSI.
British Standards Institution (2007) BS 4978:2007 Visual strength grading of softwood. London: BSI.
British Standards Institution (2004). PAS 104:2004 Wood recycling in the panelboard manufacturing industry. Specification for quality and guidance for good practice for the supply of post consumer wood for consumption in the manufacture of panelboard products. London: BSI.
British Standards Institution (2002). BS 5268-2: 2002 Structural use of timber. Code of practice for permissible stress design, materials and workmanship. London: BSI.
British Standards Institution (2000a). BS EN 519:1995 Structural timber - Grading - Requirements for machine strength graded timber and grading machines. London: BSI.
British Standards Institution (1997). BS EN 476-7:1997 Fire tests on building materials and structures. Method of test to determine the classification of the surface spread of flame of products. London: BSI.
British Standards Institution (1996). BS 4978:1996 Visual strength grading of softwood. London: BSI.
British Standards Institution (1996a). BS EN 335-3 Durability of wood and wood-based products. Definition of hazard classes of biological attack: Application to wood-based panels. London: BSI.
British Standards Institution (1995). BS EN 519:1995 Structural timber - Grading - Requirements for machine strength graded timber and grading machines. London: BSI.
British Standards Institution (1995). BS EN 384:1995 Structural timber – determination of characteristic values of mechanical properties and density. London: BSI.
British Standards Institution (1989). BS EN 476-6:1989 Fire tests on building materials and structures. Method of test for fire propagation for products. London: BSI.
CIRIA (1999). Reclaimed and recycled construction materials handbook. Publication - C513. London: Construction Industry Research and Information Association (CIRIA). ISBN – 9780860175131.
Corporate Watch (2004). UK Construction Industry Overview. Corporate Watch UK. http://www.corporatewatch.org.uk/?lid=277. Accessed 21 September 2012.
Cooper, P., Ung, T., Aucoin, JP., & Timusk, C. (1996). The potential for re-use of preservative treated utility poles removed from service. Waste Management and Research, 14, 263–279.
EPF (2002). Standard for Delivery Conditions of Recycled Wood. Brussels: European Panel Federation. http://www.europanels.org/pdf/Environment_WoodRecycling_Standard1.pdf. Accessed 12 October 2012.
Falk, R.H., DeVisser, D., Plume, G.R., & Fridley, K.J. (2003). Effect of drilled holes on the bending strength of large dimension Douglas-fir lumber. Forest Products Journal, 53(5), 55–60.
Fridley, K.J., Mitchell, J.B., Hunt, M.O., & Senft, J.F. (1996). Effect of 85 years of service on mechanical properties of timber roof members. Part 1 - Experimental observations. Forest Products Journal, 46(5), 72–78.
Glos, P. (1995). Strength grading (STEP1 Lecture A6). Timber engineering STEP 1. London: Centrum Haut. ISBN: 9056450018
HMSO (2008). Site waste management regulations 2008. SI 2008/314. London: HMSO.
HMSO (2005). Regulatory Reform (Fire Safety) Order. SI 2005/1541. London: HMSO. http://www.legislation.gov.uk/uksi/2005/1541/introduction/made. Accessed 10 October 2012.
John, VM and Zordan, SE. (2001) Research and development methodology for recycling residues as building materials - a proposal. Waste Management. Vol. 21, pp 213-219.
Lanius, R.M., Tichy, R., & Bulliet, W.M. (1981). Strength of old joists. Journal of Structural Engineering. ASCE, 107(12), 2349–2364.
LTIC (1972). Timber design manual. Canada: Laminated Timber Institute of Canada (LTIC).
Madsen, B. (1992). Structural behavior of timber (3rd edition). Canada: Timber Engineering Limited, Vancouver, BC.
Nakajima, S., & Murakami, T. (2008). Strength properties of two-by-four salvaged lumbers. 2008 World Conference on Timber Engineering, Miyazaki. http://www.ewpa.com/Archive/2008/June/Paper_034.pdf
Pearson, R.G. (1972). Effect of duration of load on the bending strength of wood. Holzforschung, 26(4), 153–158.
Plume, G.D. (1997). Reclaimed timber: A modern construction material. Proceedings of the conference on the use of recycled wood and paper in building applications. USA: Forest Products Society, 104–107.
Rammer, D.R. (1999). Evaluation of recycled timber members. Materials and construction – the Proceedings of the fifth ASCE materials engineering congress. May 10-12, Cincinnati, Ohio. pp 46–51.
Ravenshorst, G.J.P., & Van-de-Kuilen, J.W.G. (2006). An innovative species independent strength grading model. World Conference on Timber Engineering, Portland, Oregon. url: http://www.ewpa.com/Archive/2006/aug/Paper_020.pdf. (Accessed: 10 May 2010).
Recycling revolution (2012). Recycling facts [Website]. http://www.recycling-revolution.com/recycling-facts.html. Accessed 20 October 2012.
Smith, M. (2012). An investigation into the strength properties of reclaimed timber joists (MPhil thesis). Newcastle upon Tyne, UK: University of Northumbria.
TRADA (1954). Timbers for house building. UK: Timber Research and Development Association (TRADA).
Tukker, A., & Gielen, D.J. (1994). A concept for the environmental evaluation of waste management benefits. Environmental aspects of construction with waste materials. Amsterdam: Elsevier. pp.737–738
Wood, L.W. (1951). Relation of strength of wood to duration-of-load. U.S.D.A Forest Service Report No. 1916. USA: Forest Products Laboratory, Madison, WI.
Woolley, T. Kimmins, S. Harrison, R. & Harrison P. (1997). Green building handbook: Volume 1: A guide to building products and their impact on the environment. Routledge.
WRAP (2004). Evaluation of the market development potential of the waste wood and wood products reclamation and reuse sectoi. London: Waste and Resources Action Programme (WRAP). ISBN–1844051110.
WRAP (2008). Reclaimed building products guide: A guide to procuring reclaimed building products and materials for use in construction projects. London: Waste and Resources Action Programme (WRAP). http://www.bioregional.com/files/publications/WRAPReclaimedBuildingProducts_May08.pdf. Accessed 21 September 2012.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Smith, M. (2013). Use of Recycled and Reclaimed Timbers. In: Richardson, A. (eds) Reuse of Materials and Byproducts in Construction. Green Energy and Technology. Springer, London. https://doi.org/10.1007/978-1-4471-5376-4_5
Download citation
DOI: https://doi.org/10.1007/978-1-4471-5376-4_5
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-5375-7
Online ISBN: 978-1-4471-5376-4
eBook Packages: EnergyEnergy (R0)