Abstract
Boundary layers are studied which are induced by micro-periodic boundary conditions as, for instance, in the case of contact of rough bodies. The adopted micromechanical framework is outlined briefly and two applications are provided. The finite element method is applied to study the normal contact compliance in the elasto-plastic regime, and the effect of macroscopic in-plane strain on contact response is analyzed. Secondly, a simple model for prediction of the effective heat transfer coefficient in steady-state conditions is presented.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R. Hill. Interfacial operators in the mechanics of composite media. J. Mech. Phys. Solids, 31(4):347–357, 1983.
M.P.F. Sutclie. Surface asperity deformation in metal forming processes. Int. J. Mech. Sci., 30(11):847–868, 1988.
W.R.D. Wilson and S. Sheu. Real area of contact and boundary friction in metal forming. Int. J. Mech. Sci., 30(7):475–489, 1988.
S. Stupkiewicz and Z. Mroz. Phenomenological model of real contact area evolution with account for bulk plastic deformation in metal forming. Int. J. Plast., 19(3):323–344, 2003.
A.E. Giannakopoulos. The influence of initial elastic surface stresses on instrumented sharp indentation. Trans. ASME J. Appl. Mech., 70:638–643, 2003.
Y.-H. Lee and D. Kwon. Estimation of biaxial surface stress by instrumented indentation with sharp indenters. Acta Mater., 52:1555–1563, 2004.
F.P. Bowden and D. Tabor. The Friction and Lubrication of Solids. Clarendon Press, Oxford, 1953.
K.L. Johnson. Contact Mechanics. Cambridge University Press, 1985.
S. Stupkiewicz. Micromechanics of contact and interphase layers. IFTR, Reports 2/2005, Institute of Fundamental Technological Research, Warsaw, 2005.
E. Sanchez-Palencia. Boundary layers and edge effects in composites. In E. Sanchez-Palencia and A. Zaoui, editors, Homogenization Techniques for Composite Media, volume 272 of Lecture Notes in Physics, pages 121–192. Springer, Berlin, 1987.
A.A. Bandeira, P. Wriggers, and P. de Mattos Pimenta. Numerical derivation of contact mechanics interface laws using a finite element approach for large 3D deformation. Int. J. Num. Meth. Engng., 59:173–195, 2003.
K. Varadi, Z. Neder, and K. Friedrich. Evaluation of the real contact areas, pressure distributions and contact temperatures during sliding contact between real metal surfaces. Wear, 200:55–62, 1996.
Z. Handzel-Powierza, T. Klimczak, and A. Polijaniuk. On the experimental verification of the Greenwood-Williamson model for the contact of rough surfaces. Wear, 154:115–124, 1992.
T. Wanheim, N. Bay, and A.S. Petersen. A theoretically determined model for friction in metal working processes. Wear, 28:251–258, 1974.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this chapter
Cite this chapter
Stupkiewicz, S., Sadowski, P. (2006). Micromechanical analysis of deformation and temperature inhomogeneities within rough contact layers. In: Wriggers, P., Nackenhorst, U. (eds) Analysis and Simulation of Contact Problems. Lecture Notes in Applied and Computational Mechanics, vol 27. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-31761-9_36
Download citation
DOI: https://doi.org/10.1007/3-540-31761-9_36
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-31760-9
Online ISBN: 978-3-540-31761-6
eBook Packages: EngineeringEngineering (R0)