Abstract
Carbon nanotube reinforced hydroxyapatite composite coating (HA/CNT) was fabricated on stainless steel 316L by laser surface alloying (LSA) with a 2.5-kW CW Nd:YAG laser. Metallographical, compositional and phase analysis of the laser-fabricated composite coating were studied by means of scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffractometry (XRD). In addition, the corrosion behavior of the composite coating was investigated by means of potentiodynamic polarization technique and electrochemical impedance spectroscopy. A strong metallurgical bond was formed between the substrate and the coating which was presence of microcracks. The existence of CNT in laser fabricated layer was confirmed by XRD analysis. In addition, the data of electrochemical corrosion studies illustrated the HA/CNT composite coating possessed outstanding corrosion properties compared with the 316L substrate.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Lacefield WR (1993), An Introduction to Bioceramics. 2nd ed., Plenum Press, NY, Ch5:79–115.
Chen J, Wolke JGC, de Groot H, (1994) Microstructure and crystallinity in hydroxyapatite coatings. Biomaterials 15:396–399.
Kay JF, (1992) Calcium phosphate coatings for dental implants. Dent Clin North Am 36:1–18.
Zeng HT, Lacefield WR, (2000) XPS, EDX and FTIR analysis of pulsed laser deposited calcium phosphate bioceramic coatings: effect of various process parameters. Biomaterials 21:23–30.
Wang YC, Li YM, Yu HL, Ding JJ, Tang XH, Li JG, Z YH, (2005) In situ fabrication of bioceramic composite coatings by laser cladding. Surface & Coatings Technology 200:2080–2084.
Cheng GJ, Pirzada D, Cai M, Mohanty P, Bandyopadhyay A (2005), Bioceramic coating of hydroxyapatite in titanium substrate with Nd-YAG laser. Materials Science and Engineering C 25:541–547.
Lusquinos F, Pou J, Arias JL, Boutinguiza, Leon B, Perez-amor M (2002), Journal of Materials Science: Materials in Medicine 13:601–605.
Chen Y, Zhang YQ, Zhang TH, Gan CH, Zheng CY, Yu G (2006), Carbon nanotube reinforced hydroxyapatite composite coatings produced through laser surface alloying. Carbon 44:37–45.
ASTM Standard G61-86 (2003) Standard Method for Conducting Cyclic Potentiodynamic Polarisation Measurements for Localised Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys, in Annual Book of ASTM Standards, Vol. 03.02, ASTM, Philadelphia.
Ding SJ, Huang TH, Kao CT (2003), Surface & Coatings Technology, 165: 248–257.
Eliaz N, Sridhar TM, Mudali UK, Raj B (2005), Electrochemical and electrophoretic deposition of hydroxyapatite for orthopaedic applications. Surface Engineering, 21:238–242.
Fathi MH, Salehi M, Saatchi A, Mortazavi V, Moosavi SB (2003) In vitro corrosion behavior of bioceramic, metallic, and bioceramic-metallic coated stainless steel dental implants. Dental Materials 19:188–198.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag London Limited
About this paper
Cite this paper
Kwok, C.T. (2007). Fabrication of Carbon Nanotube Reinforced Hydroxyapatite Coating on Stainless Steel 316L by Laser Surface Treatment. In: Towards Synthesis of Micro-/Nano-systems. Springer, London . https://doi.org/10.1007/1-84628-559-3_44
Download citation
DOI: https://doi.org/10.1007/1-84628-559-3_44
Publisher Name: Springer, London
Print ISBN: 978-1-84628-558-5
Online ISBN: 978-1-84628-559-2
eBook Packages: EngineeringEngineering (R0)