Collection
Materials (general)
- Submission status
- Open
- Open for submission from
- 01 June 2018
- Submission deadline
- Ongoing
.
Articles (417 in this collection)
-
-
Influence of compacting pressure on the electrical properties of ZnO and ZnO:Mn ceramics
Authors (first, second and last of 11)
- N. Korsunska
- I. Markevich
- L. Khomenkova
- Content type: Research
- Open Access
- Published: 16 February 2024
- Article: 74
-
Observation on structural and optical features of new nanostructured lead-free methylammonium zinc or cobalt iodide perovskites for solar cells applications
Authors (first, second and last of 5)
- Hager H. Zeenelabden
- Ahmed Mourtada Elseman
- Mohamed M. Rashad
- Content type: Research
- Open Access
- Published: 15 November 2023
- Article: 335
-
Wear behavior and CO2 emissions analysis of drum mower blades during Alfalfa harvest
Authors (first, second and last of 5)
- Mohamed Refai
- Tarek Kh. Abdelkader
- Mahmoud A. Abdelhamid
- Content type: Research
- Open Access
- Published: 08 November 2023
- Article: 316
-
The investigation of surface free energy components and moisture sensitivity damage of asphalt mixes modified with carbon black using the sessile drop method
Authors (first, second and last of 4)
- Roozbeh Zarroodi
- Navid Ghafari Hashjin
- Maryam Payami
- Content type: Research
- Open Access
- Published: 14 October 2023
- Article: 289
-
Effect of type and aggregate gradation on the functional properties of porous asphalt (case study of Iran)
Authors (first, second and last of 4)
- Navid Ghafari Hashjin
- Roozbeh Zarroodi
- Seyyed Hassan Aghdasi Gehraz
- Content type: Research
- Open Access
- Published: 14 September 2023
- Article: 265
-
Fabric pre-treated with Vitex negundo L essential oil as a preventive tool against mosquito bite
Authors
- Bamidele Okoli
- Zakari Ladan
- Fanyana Mtunzi
- Content type: Research Article
- Open Access
- Published: 03 August 2023
- Article: 230
-
Dynamic mechanical properties and constitutive model of photosensitive resin specimens at different temperatures
Authors (first, second and last of 5)
- Tao Liu
- Zhiqiang Yin
- Qiang Shen
- Content type: Research Article
- Open Access
- Published: 06 July 2023
- Article: 203
-
CMAS deposition rate and sequence effects on cyclic life in gradient testing
Authors (first, second and last of 4)
- Byung-gun Jun
- Nils Jonsson
- Ryan C. Cooper
- Content type: Research Article
- Open Access
- Published: 13 April 2023
- Article: 138
-
Novel and flexible asymmetric supercapacitors based on NiCo2O4 nanosheets coated on Al and Cu tapes for wearable devices applications
Authors (first, second and last of 6)
- Abdelelah Alshanableh
- Borhan Aldeen Albiss
- Hasan Megdadi
- Content type: Research Article
- Open Access
- Published: 28 March 2023
- Article: 120
-
Effect of thermoplastic impregnation on the mechanical behaviour of textile reinforcement for concrete
Authors (first, second and last of 5)
- Kira Heins
- Sophie Lesker
- Thomas Gries
- Content type: Research Article
- Open Access
- Published: 25 February 2023
- Article: 93
-
Transfer-free graphene passivation of sub 100 nm thin Pt and Pt–Cu electrodes for memristive devices
Authors (first, second and last of 7)
- S. Tappertzhofen
- P. Braeuninger-Weimer
- S. Hofmann
- Content type: Research Article
- Open Access
- Published: 24 February 2023
- Article: 91
-
A new algorithm for uncertainty quantification for thermal conductivity measurement on polymers with the Haakvoort method using differential scanning calorimetry considering specimen height and real contact area
Authors
- Harutyun Yagdjian
- Simon Rommelfanger
- Martin Gurka
- Content type: Research Article
- Open Access
- Published: 18 February 2023
- Article: 85
-
Fracture of aircraft titanium alloys under high-frequency loading
Authors
- Alexander D. Nikitin
- Pavel S. Shesterkin
- Sergey S. Lopatin
- Content type: Research Article
- Open Access
- Published: 01 February 2023
- Article: 68
-
Study on gasification dephosphorization of phosphorus magnetite reduced by SiC
Authors (first, second and last of 5)
- Guo-Ping Luo
- Shuai Hao
- Xiang-Hui Ji
- Content type: Research Article
- Open Access
- Published: 13 January 2023
- Article: 56
-
Investigation of the influence of multiple thermoforming processes on the properties of continuous fiber-reinforced thermoplastics to enable structural reuse
Authors
- Justus von Freeden
- Ben Rodenwaldt
- Daniel Nebel
- Content type: Research Article
- Open Access
- Published: 12 January 2023
- Article: 54
-
Interfacial structure between TiN sintered ceramics with and without an Fe-containing grain boundary phase and Ag–Cu eutectic brazing filler material
Authors (first, second and last of 5)
- Nobuyuki Terasaki
- Naochika Kon
- Tohru Sekino
- Content type: Research Article
- Open Access
- Published: 29 December 2022
- Article: 46
-
Temperature dependence of electrical resistivity, deformation, and fracture of polygranular graphite with different amounts of porosity
Authors (first, second and last of 4)
- C. Paraskevoulakos
- B. Roebuck
- P. E. J. Flewitt
- Content type: Research Article
- Open Access
- Published: 16 December 2022
- Article: 28
-
Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale
Authors (first, second and last of 5)
- Nikolaus Papenberg
- Thomas Hatzenbichler
- Stefan Pogatscher
- Content type: Research Article
- Open Access
- Published: 12 December 2022
- Article: 14
-
Insights into the use of polyepichlorohydrin polymer in lithium battery energy storage/conversion devices: review
Authors (first, second and last of 5)
- Negese Yazie Amogne
- Delele Worku Ayele
- Mehary Dagnew
- Content type: Review Paper
- Open Access
- Published: 08 December 2022
- Article: 7
-
Formation of beryllium oxide nanofibers by polyvinyl alcohol/beryllium sulfate/polyethyleneimine composite precursors
Authors
- Md. Shakhawat Hossain
- Koji Nakane
- Content type: Research Article
- Open Access
- Published: 08 November 2022
- Article: 325
-
Processing of the yttria stabilized zirconia-bioactive glass nano composite produced by electrophoretic deposition method
Authors
- Mohammad Reza Shirpay
- Nayereh Askari
- Masoud Rajabi
- Content type: Research Article
- Open Access
- Published: 30 September 2022
- Article: 284
-
Research on metallic glasses at the atomic scale: a systematic review
Authors
- Nicolás Amigo
- Pablo Cortés
- Felipe J. Valencia
- Content type: Review Paper
- Open Access
- Published: 30 September 2022
- Article: 281
-
Estimation of the compaction parameters of aggregate base course using artificial neural networks
Authors
- Kareem Othman
- Content type: Research Article
- Open Access
- Published: 23 September 2022
- Article: 272
-
Mechanical behavior and microstructure evolution during high strain rate deformation of AA7075-T651
Authors (first, second and last of 5)
- Biswajit Dalai
- Marie Anna Moretti
- Lars-Erik Lindgren
- Content type: Research Article
- Open Access
- Published: 04 September 2022
- Article: 251
-
A simple method to form a forest of carbon nanotube bundles during growth stage
Authors
- Ahmed Obaid M. Alzahrani
- Meshari Alayash
- Salem Alghamdi
- Content type: Research Article
- Open Access
- Published: 09 July 2022
- Article: 218
-
Microstructure and properties of vacuum electron beam welded WE43 magnesium alloy joint
Authors (first, second and last of 6)
- Sheng Lei
- Xiang Zhang
- Zhonghao Huang
- Content type: Research Article
- Open Access
- Published: 08 July 2022
- Article: 207
-
Investigation of phase transformation related electrical conductivity of long-term heat treated aluminium electrolysis cathodes
Authors (first, second and last of 4)
- Jonas Hankel
- Sandra Kernebeck
- Sebastian Weber
- Content type: Research Article
- Open Access
- Published: 08 July 2022
- Article: 215
-
Synergy of stochastics and inelasticity at multiple scales: novel Bayesian applications in stochastic upscaling and fracture size and scale effects
Authors (first, second and last of 9)
- Adnan Ibrahimbegovic
- Hermann G. Matthies
- Jaroslav Vondřejc
- Content type: Review Paper
- Open Access
- Published: 02 June 2022
- Article: 191
-
Nanomechanical subsurface characterisation of cellulosic fibres
Authors (first, second and last of 7)
- Julia Auernhammer
- Markus Langhans
- Robert W. Stark
- Content type: Research Article
- Open Access
- Published: 05 May 2022
- Article: 160
-
New approach for starch dialdehyde preparation using microwave irradiation for removal of heavy metal ions from water
Authors (first, second and last of 4)
- Alnada Wannous
- Slieman Milaneh
- Yomen Atassi
- Content type: Research Article
- Open Access
- Published: 05 April 2022
- Article: 133
-
The effect of copper on the multiple carbon nanofilaments growths by the methane decomposition over the oxidized diamond-supported nickel–copper bimetallic catalyst
Authors (first, second and last of 4)
- M. Shiraishi
- K. Nakagawa
- M. Nishitani-Gamo
- Content type: Research Article
- Open Access
- Published: 01 April 2022
- Article: 126
-
Synthesis of hydrogels for adsorption of anionic and cationic dyes in water: ionic liquid as a crosslinking agent
Authors (first, second and last of 8)
- Huajing Gao
- Jilun Jiang
- Jianlin Zhang
- Content type: Research Article
- Open Access
- Published: 26 March 2022
- Article: 118
-
Precursor superconducting effects in the optimally doped YBa2Cu3O7−δ superconductor: the confrontation between superconducting fluctuations and percolative effects revisited
Authors (first, second and last of 4)
- I. F. Llovo
- J. Mosqueira
- F. Vidal
- Content type: Research Article
- Open Access
- Published: 22 March 2022
- Article: 110
-
Effect of thermal aging on corrosion behavior of duplex stainless steels
Authors (first, second and last of 8)
- Pratik Murkute
- Kofi Oware Sarfo
- O. Burkan Isgor
- Content type: Research Article
- Open Access
- Published: 07 March 2022
- Article: 97
-
Characterization and optimization of alkali-treated yushania alpina bamboo fiber properties: case study of ethiopia species
Authors (first, second and last of 4)
- Dawit Tessema Ebissa
- Tamrat Tesfaye
- David Wood
- Content type: Research Article
- Open Access
- Published: 14 February 2022
- Article: 79
-
Development, preparation and characterization of chitosan, gelatin and heparin membranes for biomedical applications
Authors (first, second and last of 7)
- Rossana Seixas Maia da Silva
- Rossemberg Cardoso Barbosa
- Marcus VinÃcius Lia Fook
- Content type: Research Article
- Open Access
- Published: 04 January 2022
- Article: 44
-
Influence of stamping parameters on stamping characteristics of SAF2205 bidirectional stainless steel
Authors (first, second and last of 4)
- Angang Cao
- Wei Li
- Jialin Fu
- Content type: Research Article
- Open Access
- Published: 04 January 2022
- Article: 35
-
High-pressure compacted recycled polymeric composite waste materials for marine applications
Authors
- Edward Clark
- Monika Bleszynski
- Matt Gordon
- Content type: Research Article
- Open Access
- Published: 04 January 2022
- Article: 36
-
Correction to: Effects of luffa and glass fibers in polyurethane-based ternary sandwich composites for building materials
Authors (first, second and last of 4)
- J. F. Jamaluddin
- A. Firouzi
- A. N. A. Yahaya
- Content type: Correction
- Published: 29 November 2021
- Article: 891
-
A review on advances in doping with alkali metals in halide perovskite materials
Authors (first, second and last of 5)
- Madeeha Tabassum
- Qasim Zia
- Lei Su
- Content type: Review Paper
- Open Access
- Published: 25 November 2021
- Article: 888
-
Experimental study of anisotropic constitutive behavior of β-HMX crystals via nanoindentation and small-scale dynamic impact
Authors (first, second and last of 4)
- Ayotomi Olokun
- Tyler Dillard
- Vikas Tomar
- Content type: Research Article
- Open Access
- Published: 17 November 2021
- Article: 875
-
Identification of cinnabar existing in different objects using portable coupled XRF-XRD, laboratory-type XRD and micro-Raman spectroscopy: comparison of the techniques
Authors
- Jingyi Shen
- Yijia Shen
- Content type: Case Study
- Open Access
- Published: 14 November 2021
- Article: 866
-
Sub-ns-pulsed laser cleaning of an archaeological bone from the Sierra de Atapuerca, Spain: a case study
Authors (first, second and last of 9)
- Md. Ashiqur Rahman
- German F. de la Fuente
- Luis A. Angurel
- Content type: Research Article
- Open Access
- Published: 13 November 2021
- Article: 865
-
Paints analysis and conservation treatment of painted sculpture: Jean Dubuffet, Guard Dog II
Authors (first, second and last of 6)
- Ye Bin Han
- Na Ra Lee
- Hee Hong Kwon
- Content type: Research Article
- Open Access
- Published: 24 October 2021
- Article: 846
-
Valorization of granite micronized stones wastes for eco-friendly production of fired clay bricks
Authors (first, second and last of 4)
- Blasius Ngayakamo
- Gbetoglo Charles Komadja
- Azikiwe Peter Onwualu
- Content type: Research Article
- Open Access
- Published: 19 October 2021
- Article: 845
-
CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance
Authors (first, second and last of 5)
- L. Chmielak
- L. Mujica Roncery
- W. Theisen
- Content type: Research Article
- Open Access
- Published: 09 October 2021
- Article: 835
-
Relationship between microstructure and deformation of porous Ni-based cermets under redox cycling
Authors (first, second and last of 10)
- Kazuhisa Sato
- Satoshi Watanabe
- Koichi Eguchi
- Content type: Research Article
- Open Access
- Published: 27 September 2021
- Article: 810
-
A review of the use of simple time-domain NMR/MRI for material-science
Authors
- J. Beau W. Webber
- Content type: Review Paper
- Open Access
- Published: 27 September 2021
- Article: 809
-
Electric polarization and crystal orientation of lead zirconate titanate under mechanical stress due to embedding in a metal matrix
Authors (first, second and last of 4)
- Tetsuro Yanaseko
- Hiroshi Sato
- Hiroshi Asanuma
- Content type: Short Communication
- Open Access
- Published: 17 September 2021
- Article: 807