Abstract
The conductivity is determined by the number of conductive particles attached to Thin Film Transistor Liquid Crystal Display (TFT-LCD) bumps. The image detection method for the number of particles is widely used to judge the quality of TFT-LCD bumps. We propose a detection method of CNN-based Classification for conductive particles in TFT-LCD manufacturing. First, aiming at the phenomenon that the adhesion of conductive particles seriously affects the detection accuracy, a binary classification detection of bumps conductivity is proposed based on a static number of particles attached to the bumps. Second, a convolutional neural network (CNN) classification model is established; due to the bump images with multiple gray levels, principal component analysis (PCA) feature selection is introduced into the classification model. This model can learn features of particle from massively labeled data. The experimental results show that the accuracy of our proposed method is 95.55%. The accuracy is 1.46% higher than the K-means clustering + CNN method, 2.45% higher than the watershed method, 3.00% higher than the K-means clustering method and 7.70% higher than the Otsu method. The method proposed in this paper can be effectively applied to the quality detection of TFT-LCD bump.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sheng X, Jia L, Xiong Z, Wang Z, Ding H (2013) ACF-COG interconnection conductivity inspection system using conductive area. Microelectron Reliab 53:622–628
Kim JH, Ahn S, Jeon JW, Byun JE, A high-speed high-resolution vision system for the inspection of TFT LCD. In: IEEE international symposium on industrial electronics proceedings, vol 1, pp 101–105 (2001)
Jia L, Sheng X, Xiong Z, Wang Z, Ding H (2014) Particle on bump (POB) technique for ultra-fine pitch chip on glass (COG) applications by conductive particles and adhesives. Microelectron Reliab 54:825–832
Wang SY, Liao WH, Yang KH (2012) Investigation of Curtain Mura in TFT–TN panels after COG ACF process. Displays 33:173–177
Chang SM, Jou JH, Hsieh A, Chen TH, Chang CY, Wang YH, Huang CM (2001) Characteristic study of anisotropic-conductive film for chip-on-film packaging. Microelectron Reliab 41:2001–2009
Tsai MY, Wu CY, Huang CY, Cheng WC, Yang SS (2006) Study of some parameter effects on warpage and bump-joint stresses of COG packages. IEEE Trans Adv Packag 29:587–598
Cheng HC, Ho CL, Chen WC, Yang SS (2006) A study of process-induced deformations of anisotropic conductive film (ACF) assembly. IEEE Trans Compon Packag Technol 29:577–588
Kristiansen H, Liu J (1998) Overview of conductive adhesive interconnection technologies for LCDs. IEEE Trans Compon Packag Manuf Technol Part A 21:208–214
Chan YC, Luk DY (2002) Effects of bonding parameters on the reliability performance of anisotropic conductive adhesive interconnects for flip-chip-on-flex packages assembly II, different bonding pressure. Microelectron Reliab 42:1195–1204
Yen YW, Lee CY (2011) ACF particle distribution in COG process. Microelectron Reliab 51:676–684
Yim MJ, Li Y, Moon K-S, Paik KW, Wong CP (2008) Review of recent advances in electrically conductive adhesive materials and technologies in electronic packaging. J Adhes Sci Technol 22:1593–1630
Watanabe I, Fujinawa T, Arifuku M, Fujii M, Yasushi G (2004) Recent advances of interconnection technologies using anisotropic conductive films in flat panel display applications. In: 9th international symposium on advanced packaging materials: processes, properties and interfaces, pp 11–16
Sumi K, Lim D, Seo D-G, Jeong D (2005) Defect classification for the inspection of TFT LCD glass. In: Optomechatronic machine vision
Lin CS, Huang KH, Lin TC, Shei HJ, Tien CL (2011) An automatic inspection method for the fracture conditions of anisotropic conductive film in the TFT-LCD assembly process. Int J Optomechatronics 5:286–298
Chao SM, Tsai DM (2010) Anisotropic diffusion with generalized diffusion coefficient function for defect detection in low-contrast surface images. Pattern Recogn 43:1917–1931
Wang W (2008) Rock particle image segmentation and systems. In: Pattern recognition techniques, technology and applications, pp 197–226
Ni G, Liu L, Du X, Zhang J, Liu J, Liu Y (2017) Accurate AOI inspection of resistance in LCD anisotropic conductive film bonding using differential interference contrast. Optik 130:786–796
Pierna JAFN, Baeten V, Renier AM, Cogdill RP, Dardenne P (2004) Combination of support vector machines (SVM) and near-infrared (NIR) imaging spectroscopy for the detection of meat and bone meal (MBM) in compound feeds. J Chemom 18:341–349
Zhang B, Abbas A, Romagnoli JA (2011) Multi-resolution fuzzy clustering approach for image-based particle characterization for particle systems. Chemom Intell Lab Syst 107:155–164
Manivannan K, Aggarwal P, Devabhaktuni V, Kumar A, Nims D, Bhattacharya P (2012) Particulate matter characterization by gray level co-occurrence matrix based support vector machines. J Hazard Mater 223–224:94–103
Moftah HM, Azar AT, Al-Shammari ET, Ghali NI, Hassanien AE, Shoman M (2014) Adaptive k-means clustering algorithm for MR breast image segmentation. Neural Comput Appl 24:1917–1928
Chen YY, Xiao K, Guo ZX, He JJ, Liu C, Chen SY (2017) Detection of conducting particles bonding in the circuit of liquid crystal display. Chin J Liq Cryst Disp 32:553–559
Sharma M, Bhave A, Janghel RR (2019) White blood cell classification using convolutional neural network. In: Soft computing and signal processing, pp 135–143
O’Connor T, Hawxhurst C, Shor LM, Javidi B (2020) Red blood cell classification in lensless single random phase encoding using convolutional neural networks. Opt Express 28:33504–33515
Declaration of Competing Interest
None.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
He, S., Li, Z., Feng, Z., Xie, X. (2024). Detection Method of CNN-Based Classification for Conductive Particles in TFT-LCD Manufacturing. In: Wang, W., Liu, X., Na, Z., Zhang, B. (eds) Communications, Signal Processing, and Systems. CSPS 2023. Lecture Notes in Electrical Engineering, vol 1033. Springer, Singapore. https://doi.org/10.1007/978-981-99-7502-0_60
Download citation
DOI: https://doi.org/10.1007/978-981-99-7502-0_60
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-7555-6
Online ISBN: 978-981-99-7502-0
eBook Packages: EngineeringEngineering (R0)