Abstract
Sectoral growth is increasing day by day and the competition market is growing with it. At the same time, customer awareness is also increasing. As customer awareness increases, the quality of service provided should also increase. One of the ways that companies will apply in order to maintain their existence in this competitive environment and to prevent customer loss is to make the lean manufacturing philosophy a corporate culture. It is a production approach that does not contain any unnecessary elements in the lean manufacturing structure, minimizes waste and aims to increase efficiency in production. When moving to the lean manufacturing philosophy, it is of great importance for companies to draw a correct road map. This study was applied to the product/product group produced in a foundry. Value stream mapping (VSM), which is one of the lean manufacturing techniques for the determined product/product group, was made and the current situation value stream map was created. With value stream mapping, bottlenecks and losses in the process were determined and a future situation value stream map was created. Lean manufacturing techniques were applied at these determined points, problems were eliminated and productivity increase was achieved in production. Fuzzy logic was used to clearly determine the productivity increase. Fuzzy logic creates numerical models by imitating the human mind many vague, non-numerically expressed terms that we use daily. With fuzzy logic, the efficiency rate was modeled numerically and the contribution of the lean manufacturing techniques applied to productivity was determined.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sivaslı, E.: A study on using lean techniques in business processes. Master thesis, Institute of Social Sciences, Department of Total Quality Management, Dokuz Eylül University (2006)
Maskell, B., Baggaley, B.: Practical Lean Accounting: A Proven System for Measuring and Managing the Lean Enterprise. Productivity Press, New York (2004)
Roblek, V., Meško, M., Krapež, A.: A complex view of industry 4.0. Sage Open 6(2), 1–11 (2016)
Öztürk, H., Elevli, B.: Lean manufacturing philosophy in the mining industry. J. Eng. Brains 2(1), 24–32 (2017)
Baggaley, B.: Costing by value stream. J. Cost Manag. 17(3), 24–30 (2003)
Birgün, S., Gülen, K.G., Özkan, K.: Using value stream mapping technique in transition to lean manufacturing: an application in the manufacturing industry. Commer. Univ. J. Sci. 5(9), 47–59 (2006)
Chan, F.T.S., Lau, H.C.W., Ip, R.W.L., Chan, H.K., Kong, S.: Implementation of total productive maintenance: a case study. Int. J. Prod. Econ. 95, 71–94 (2005)
Tanık, M.: Improving die setting times with SMED methodology: a lean six sigma application. J. Muğla Univ. Inst. Soc. Sci. 25, 117–140 (2010)
Michalska, J., Szewieczek, D.: The 5S methodology as a tool for improving the organisation. J. Achieve. Mater. Manuf. Eng. 24(2), 211–214 (2017)
Gürdal, K.: Current approaches in cost management. Politik Kitapevi, Ankara (2007)
Achanga, P., Shehab, E., Roy, R., Nelder, G.: A fuzzy-logic advisory system for lean manufacturing. Int. J. Comput. Integr. Manuf. 25(9), 839–852 (2012)
Buonamico, N., Muller, L., Camargo, M.: A new fuzzy logic-based metric to measure lean warehousing performance. Int. J. 18(2), 96–111 (2017)
Jordon, K., Dossou, P.-E., Junior, J.C.: Using lean manufacturing and machine learning for improving medicines procurement and dispatching in a hospital. Flexible Autom. Intell. Manuf. 38, 1034–1041 (2019)
Balaji, S.R., Vinodh, S.: Fuzzy logic based leanness assessment and its decision support system. Int. J. Prod. Res. 49(13), 4027–4041 (2011)
Susilawati, A., Tan, J., Bell, D., Sarwar, M.: Fuzzy Logic based method to measure degree of lean activity in manufacturing industry. J. Manuf. Syst. 34, 1–11 (2015)
Kemalbay, V.: Mold change in single minutes intelligent decision support system and its application in the textile industry. Master thesis, Graduate School of Natural and Applied Sciences, Istanbul Technical University, İstanbul (2012)
Rother, M., Shook, J.: Learning to See, Versiyon 1.2. The Lean Enterprise Institute Inc., Brookline (1998)
Adalı, M., Kiraz, A., Akyüz, U., Halk, B.: The use of value stream mapping technique in the transition to lean manufacturing: application in a large-scale tractor business. Sakarya Univ. J. Sci. Inst. 21(2), 242–251 (2016)
Elmas, Ç.: Fuzzy Logic Controllers Seçkin Yayıncılık. Ankara (2003)
Gökşen, Y.: From traditional manufacturing to flexible manufacturing: a comparative review. Dokuz Eylül Univ. J. Soc. Sci. Inst. 5(4), 32–48 (2003)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Coskun, Z., Aktepe, A., Ersöz, S., Mangan, A.G., Kuruoğlu, U. (2024). Calculation of Efficiency Rate of Lean Manufacturing Techniques in a Casting Factory with Fuzzy Logic Approach. In: Şen, Z., Uygun, Ö., Erden, C. (eds) Advances in Intelligent Manufacturing and Service System Informatics. IMSS 2023. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-6062-0_23
Download citation
DOI: https://doi.org/10.1007/978-981-99-6062-0_23
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-6061-3
Online ISBN: 978-981-99-6062-0
eBook Packages: EngineeringEngineering (R0)