Abstract
The fabrication of fully functional active components via additive manufacturing, also known as 3D printing, has progressed beyond mere prototype. With composites, metals, ceramics, concrete, and polymers, it is a flexible production technique. This article focuses on the evolution of additive products in the biomedical and sports industries. Additionally, a number of instances of additive manufacturing techniques used in the creation of unique goods are provided. The use of additive manufacturing as a collaborative tool with the idea of innovative problem-solving techniques in the creation of new items has also been given a conceptual framework.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
De Krijger J, Rans C, Van Hooreweder B, Lietaert K, Pouran B, Zadpoor AA (2017) Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading. J Mech Behav Biomed Mater 70:7–16
Afshar M, Anaraki AP, Montazerian H, Kadkhodapour J (2016) Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures. J Mech Behav Biomed Mater 62:481–494. https://doi.org/10.1016/j.jmbbm.2016.05.027
Pecci R, Baiguera S, Ioppolo P, Bedini R, del Gaudio C (2020) 3D printed scaffolds with random microarchitecture for bone tissue engineering applications: Manufacturing and characterization. J Mech Behav Biomed Mater 103:103583. https://doi.org/10.1016/j.jmbbm.2019.103583
Liu YJ, Li SJ, Hou WT, Wang SG, Hao YL, Yang R et al (2016) Electron beam melted beta-type Ti–24Nb–4Zr–8Sn porous structures with high strength-to-modulus ratio. J Mater Sci Techno 32(6):505–508
Zhang LC, Attar H, Calin M, Eckert J (2016) Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications. Mater Technol Adv Perform Mater 31(2):66–76
Zhang LC, Xu J, Ma E (2002) Mechanically alloyed amorphous Ti50(Cu0.45Ni0.55) 44–xAl xSi4B2 alloys with supercooled liquid region. J Mater Res 17(07):1743–1749
Zhang LC, Shen Z, Xu J (2003) Glass formation in a (Ti, Zr, Hf)–(Cu, Ni, Ag)–Al high-order alloy system by mechanical alloying. J Mater Res 18(9):2141–2149
Rayegani F, Onwubolu GC (2014) Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE). Int J Adv Manuf Technol 73(1–4):509–519
Pant M, Singari RM, Arora PK, Moona G, Kumar H (2020) Mater Res Express 7:11
Melchels FP, Feijen J, Grijpma DW (2010) Biomaterials 31:6121
Gibson I, Rosen D, Stucker B, Khorasani M (2014) Additive manufacturing technologies, 3rd ed. Springer, New York, p 675. ISBN: 978-3-030-56126-0
Lee H, Lim CHJ, Low MJ, Tham N, Murukeshan VM, Kim YJ (2017) Int J Pr Eng Man-Gt 4:307
Tofail SA, Koumoulos EP, Bandyopadhyay A, Bose S, Donoghue L, Charitidis C (2018) Mater Today 21:22
Ronga M, Fagetti A, Canton G, Paiusco E, Surace MF, Cherubino P (2013) Clinical applications of growth factors in bone injuries: experience with BMPs. Injury 44:S34–S39
Zhang LC, Attar H (2016) Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review. Adv Eng Mater 18(4):463–475
Lu H, Poh C, Zhang LC, Guo Z, Yu X, Liu H (2009) Dehydrogenation characteristics of Ti-and Ni/Ti-catalyzed Mg hydrides. J Alloys Compd 481(1):152–155
Ehtemam-Haghighi S, Prashanth KG, Attar H, Chaubey AK, Cao GH, Zhang LC (2016) Evaluation of mechanical and wear properties of Ti–xNb–7Fe alloys designed for biomedical applications. Mater Des 111:592–599
Liu X, Shen Y, Yang R, Zou S, Ji X, Shi L et al (2012) Inkjet printing assisted synthesis of multicomponent mesoporous metal oxides for ultrafast catalyst exploration. Nano Lett 12(11):5733–5739
Ehtemam-Haghighi S, Liu Y, Cao G, Zhang LC (2016) Phase transition, microstructural evolution and mechanical properties of Ti–Nb–Fe alloys induced by Fe addition. Mater Des 97:279–286
Wohlers T, Campbell I, Huff R et al (2019) Wohlers report 2019: 3D printing and additive manufacturing state of the industry. Wohlers Associates, Fort Collins, CO
Gibson I, Rosen D, Stucker B (2015) Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing, 2nd edn. Springer, New York
Murray CJ (2015) 3D Systems going mainstream in heathcare: 3D printing is becoming a go-to for customized healthcare solutions. Des News 70:27–28
Quinlan HE, Hasan T, Jaddou J et al (2017) Industrial and consumer uses of additive manufacturing: a discussion of capabilities, trajectories, and challenges. J Ind Ecol 21:S15–S20
Sandström CG (2016) The non-disruptive emergence of an ecosystem for 3D printing—insights from the hearing aid industry’s transition 1989–2008. Technol Forecast Soc Change 102:160–168
Jang TS, Kim D, Han G et al (2020) Powder based additive manufacturing for biomedical application of titanium and its alloys: a review. Biomed Eng Lett 10:505–516. https://doi.org/10.1007/s13534-020-00177-2
Kelly SM, Kampe SL (2004) Microstructural evolution in laser-deposited multilayer Ti-M-4V builds: Part I. Microstructural characterization. Metall Mater Trans-Phys Metall Mater Sci 35A:1861–1867
Xue W, Krishna BV, Bandyopadhyay A, Bose S (2007) Processing and biocompatibility evaluation of laser processed porous titanium. Acta Biomater 3:1007–1018
Krishna BV, Bose S, Bandyopadhyay A (2007) Low stiffness porous Ti structures for load-bearing implants. Acta Biomater 3:997–1006
Kobryn PA, Semiatin SL (2001) The laser additive manufacture of Ti-6Al-4V. JOM 53:40–42
Heinl P, Rottmair A, Körner C, Singer RF (2007) Cellular titanium by selective electron beam melting. Adv Eng Mater 9:360–364
Harrysson OLA, CansiZoglu O, Marcellin-Little DJ, Cormier DR, West HA (2008) Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. Mater Sci Eng C-Biomim Supramol Syst 28:366–373
Das S, Wohlert M, Beaman JJ, Bourell DL (1999) Processing of titanium net shapes by SLS/HIP. Mater Des 20:115–121
Hollander DA, Von Walter M, Wirtz T, Sellei R, Schmidt-Rohlfing B, Paar O et al (2006) Structural, mechanical and in vitro characterization of individually structured Ti–6Al–4V produced by direct laser forming. Biomaterials 27:955–963
Kumar S, Kruth J-P (2008) Wear performance of SLS/SLM materials. Adv Eng Mater 10:750–753
Li JP, Habibovic P, van Den Doel M, Wilson CE, de Wijn JR, van Blitterswijk CA et al (2007) Bone ingrowth in porous titanium implants produced by 3D fiber deposition. Biomaterials 28:2810–2820
Ryan GE, Pandit AS, Apatsidis DP (2008) Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. Biomaterials 29:3625–3635
Balla VK, Devasconcellos PD, Xue W, Bose S, Bandyopadhyay A (2009) Fabrication of compositionally and structurally graded Ti–TiO2 structures using laser engineered net shaping (LENS). Acta Biomater 5:1831–1837
Das M, Balla VK, Basu D, Bose S, Bandyopadhyay A (2010) Laser processing of SiC-particle-reinforced coating on titanium. Scr Mater 63:438–441
Das M, Bysakh S, Basu D, Sampath Kumar TS, Balla VK, Bose S et al (2011) Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium. Surf Coat Technol 205:4366–4373
Zhang Y, Sahasrabudhe H, Bandyopadhyay A (2015) Additive manufacturing of Ti-Si-N ceramic coatings on titanium. Appl Surf Sci 346:428–437
Janaki Ram GD, Esplin CK, Stucker BE (2008) Microstructure and wear properties of LENS deposited medical grade CoCrMo. J Mater Sci Mater Med 19:2105–2111
Gaytan SM, Murr LE, Martinez E, Martinez JL, Machado BI, Ramirez DA et al (2010) Comparison of microstructures and mechanical properties for solid and mesh cobalt-base alloy prototypes fabricated by electron beam melting. Metall Mater Trans A 41:3216–3227
Chan BQY, Low ZWK, Heng SJW, Chan SY, Owh C, Loh XJ, Appl ACS (2016) ACS Appl Mater Interfaces 8:10070
Small W IV, Wilson TS, Benett WJ, Loge JM, Maitland DJ (2005) Opt Express 13:8204
Peterson GI, Dobrynin AV, Becker ML (2017) Adv Healthc Mater 6
Fernandes DJ, Peres RV, Mendes AM, Elias CN (2011) ISRN Dent 2011:1
Petrini L, Migliavacca F (2011) J Metall 2011
Lendlein A, Langer R (2002) Science (80–):296, 1673
Zhang D, George OJ, Petersen KM, Jimenez-Vergara AC, Hahn MS, Grunlan MA (2014) Acta Biomater 10:4597
Jung YC, Cho JW (2010) J Mater Sci Mater Med 21:2881
Paolini A, Kollmannsberger S, Rank E (2019) Additive manufacturing in construction: a review on processes, applications, and digital planning methods. Addit Manuf 30(July):100894. https://doi.org/10.1016/j.addma.2019.100894
Yuan L (2019) Solidification defects in additive manufactured materials. Jom 71(9):3221–3222. https://doi.org/10.1007/s11837-019-03662-x
Xhameni A, Cheng R, Farrow T (2022) A precision method for integrating shock sensors in the lining of sports helmets by additive manufacturing. IEEE Sens Lett 6(10):1–4. Article number 5000704. https://doi.org/10.1109/LSENS.2022.3205249
Novak JI (2020) A parametric method to customize surfboard and stand up paddle board fins for additive manufacturing. Comput Aided Des Appl 18(2):297–308. https://doi.org/10.14733/cadaps.2021.297-308
Graziosi S, Rosa F, Casati R, Solarino P, Vedani M, Bordegoni M (2017) Designing for metal additive manufacturing: a case study in the professional sports equipment field. Procedia Manuf 11:1544–1551. https://doi.org/10.1016/j.promfg.2017.07.288
Li Z, Wang S, Ye H, Lv L, Zhao X, Liu Y, Zhou Y (2020) Preliminary clinical application of complete workflow of digitally designed and manufactured sports mouthguards. Int J Prosthodont 33:99–104
Yanagi T, Kakura K, Tsuzuki T, Isshi K, Taniguchi Y, Hirofuji T, Kido H, Yoneda M (2019) Fabrication of mouthguard using digital technology. Dentistry 9:1000531
Takahashi M, Koide K, Mizuhashi F (2014) Optimal heating conditions for forming a mouthguard using a circle tray: effect of different conditions on the thickness and fit of formed mouthguards. J Prosthodont Res 58:171–176
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Sollapur, S.B., Sharath, P.C., Waghmare, P. (2024). Applications of Additive Manufacturing in Biomedical and Sports Industry. In: Rajendrachari, S. (eds) Practical Implementations of Additive Manufacturing Technologies. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-99-5949-5_13
Download citation
DOI: https://doi.org/10.1007/978-981-99-5949-5_13
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-5948-8
Online ISBN: 978-981-99-5949-5
eBook Packages: EngineeringEngineering (R0)