Abstract
In post-combustion CO2 capture, amine-based absorbents are the most-widely used CO2 capture agent. Corrosion is considered to be one of the most severe operational problems in amine-based CO2 absorption processes and experience shows that amine degradation products often aggravate corrosion. In general, amines are not intrinsically corrosive, but amines may become corrosive when they absorb CO2. Furthermore, since the treatment units operate in semi-closed circuit, the solvent may become enriched with possibly corrosive degradation products. CO2 transportation is an important stage in whole-chain CCUS projects. Impurity is an important factor in CO2-induced transport pipeline corrosion. H2O, NOx, O2, H2, CH4, H2S, etc. are typical impurities that may accelerate CO2 corrosion in pipeline CO2 transportation. The properties of CO2 containing impurities determine the parameters of phase equilibrium, density, compressibility, viscosity, etc., which influence a series of system parameters like the pressure curve/loss conditions, heat transfer, flow volume, etc. in the pipeline transportation process. The changes of those system parameters in turn affect the potential for CO2-induced pipeline corrosion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
U.S. Department of Energy: Carbon Capture, Utilization & Storage. https://www.energy.gov/carbon-capture-utilization-storage
Rackley, S.A.: Carbon Capture and Storage. Butterworth-Heinemann, Oxford (2017)
Xiang, Y., Xie, W., Ni, S., He, X.: Comparative study of A106 steel corrosion in fresh and dirty MEA solutions during the CO2 capture process: Effect of NO3−. Corros. Sci. 167, 108521 (2020)
Kittel, J., Gonzalez, S.: Corrosion in CO2 post-combustion capture with alkanolamines–a review. Oil Gas Sci. Technol. 69(5), 915–929 (2014)
Kohl, A.L., Nielsen, R.: Gas purification. Gulf Publishing Company, Houston (1997)
Fytianos, G., Ucar, S., Grimstvedt, A., Svendsen, H.F., Knuutila, H.: Corrosion evaluation of MEA solutions by SEM-EDS. ICP-MS and XRD, Energy Procedia 86, 197–204 (2016)
Budzianowski, W.M.: Single solvents, solvent blends, and advanced solvent systems in CO2 capture by absorption: a review. Int. J. Glob. Warm. 7(2), 184–225 (2015)
Gouedard, C., Picq, D., Launay, F., Carrette, P. L.: Amine degradation in CO2 capture. I. A review, Int. J. Greenh. Gas. Con. 10, 244–270 (2012)
Bonis, M., Ballaguet, J., Rigaill, C.: A critical look at amines: a practical review of corrosion experience over four decades. In: 83rd Annual Convention of the Gas Processors Association 2004, San Antonio, U.S., vol. II, 644–659. GPA Midstream Association (2004)
Tanthapanichakoon, W., Veawab, A.: Heat stable salts and corrosivity in amine treating units. In: Proceedings of the 6th International Conference on Greenhouse Gas Control Technologies, Kyoto, Japan, vol. II, 1591–1594. Elsevier (2003)
DuPart, M., Bacon, T., Edwards, D.: Understanding corrosion in alkanolamine gas treating plants: part 1. Hydrocarb. Process. 72(5), 6295319 (1993)
Veldman, R.: Alkanolamine solution corrosion mechanisms and inhibition from heat stable salts and CO2. In: Corrosion 2000: National Association of Corrosion Engineers International Annual Conference and Corrosion Show, Orlando, U.S., NACE-00496. OnePetro (2000)
Nielsen, R., Lewis, K., McCullough, J., Hansen, D.: Corrosion in refinery amine systems. In: Corrosion 95: National Association of Corrosion Engineers International Annual Conference and Corrosion Show, Orlando, U.S., 128737. OnePetro (1995)
Al-Luqman, S., Al-Zahrani, A.M.: Methodology of mitigating corrosion mechanisms in amine gas treating units. In: Corrosion 2006: National Association of Corrosion Engineers International Annual Conference and Corrosion Show, San Diego, U.S., NACE-06441. OnePetro (2006)
Teevens, P.J.: Toward a better understanding of of the cracking behavior of carbon steel in alkanolamine sour gas sweetening units: its detection, monitoring and how to avoid it. In: Corrosion 90: National Association of Corrosion Engineers International Annual Conference and Corrosion Show, Houston, U.S., 198. OnePetro (1990)
Muhammad, H.R., Faical, L.: CO2 capture in alkanolamine-RTIL blends via carbamate crystallization: route to efficient regeneration. Environ. Sci. Technol. 46(20), 11443–11450 (2012)
Muhammad, H.R., Hana, B., Pascal, F., Mohamed, S., Faical, L.: Corrosion behavior of carbon steel in alkanolamine/room-temperature ionic liquid based CO2 capture systems. Ind. Eng. Chem. Res. 51(26), 8711–8718 (2012)
Xiang, Y., Yan, M.C., Choi, Y.S., Young, D., Nesic, S.: Time-dependent electrochemical behavior of carbon steel in MEA-based CO2 capture process. Int. J. Greenh. Gas. Con. 30, 125–132 (2014)
Campbell, K.L.S., Zhao, Y.C., Hall, J.J., Williams, D.R.: The effect of CO2-loaded amine solvents on the corrosion of a carbon steel stripper. Int. J. Greenh. Gas. Con. 47, 376–385 (2016)
Rooney, P.C., DuPart, M.: Corrosion in alkanolamine plants: causes and minimization. In: Corrosion 2000: National Association of Corrosion Engineers International Annual Conference and Corrosion Show, Orlando, U.S., NACE-00494. OnePetro (2000)
Kittel, J., Bonis, M., Perdu, G.: Corrosion control on amine plants: new compact unit design for high acid gas loadings. In: Sour Oil & Gas Advanced Technology Conference, vol. 27 (2008)
Bui, M., Adjiman, C.S., Bardow, A., Anthony, E.J., Boston, A., Brown, S., Fennell, P.S., Fuss, S., Galindo, A., Hackett, L.A.: Carbon capture and storage (CCS): the way forward. Energ. Environ. Sci. 11(5), 1062–1176 (2018)
Onyebuchi, V.E., Kolios, A., Hanak, D.P., Biliyok, C., Manovic, V.J.R., Reviews, S.E.: A systematic review of key challenges of CO2 transport via pipelines. Renew. Sust. Energ. Rev. 81, 2563–2583 (2018)
Oosterkamp, A., Ramsen, J.: State-of-the-art overview of CO2 pipeline transport with relevance to offshore pipelines. Haugesund: Research Council of Norway, Gassco and Shell Technology Norway (2008)
Chapoy, A., Nazeri, M., Kapateh, M., Burgass, R., Coquelet, C., Tohidi, B.: Effect of impurities on thermophysical properties and phase behaviour of a CO2-rich system in CCS. Int. J. Greenh. Gas. Con. 19, 92–100 (2013)
Munkejord, S., Hammer, M., Løvseth, S.: Intergovernmental panel on climate change, carbon capture & storage. Appl. Energy 169, 499–523 (2016)
Porter, R.T.J., Fairweather, M., Pourkashanian, M., Woolley, R.M.: The range and level of impurities in CO2 streams from different carbon capture sources. Int. J. Greenh. Gas. Con. 36, 161–174 (2015)
Liljemark, S., Arvidsson, K., McCann, M.T., Tummescheit, H., Velut, S.: Dynamic simulation of a carbon dioxide transfer pipeline for analysis of normal operation and failure modes. Energy Procedia 4, 3040–3047 (2011)
Zhang, Y., Gao, K., Schmitt, G.: Water effect on steel under supercritical CO2 condition. In: Corrosion 2011: National Association of Corrosion Engineers International Annual Conference and Corrosion Show, Houston, U.S., NACE-11378. OnePetro (2011)
Zhang, Y., Gao, K., Schmitt, G.: Inhibiting steel corrosion in aqueous supercritical CO2 conditions. Mater. Performance 50(9), 54–59 (2011)
Schremp, F.W., Roberson, G.R.: Effect of supercritical carbon dioxide (CO2) on construction materials. SPE J. 15(03), 227–233 (1975)
Zhang, Z., Wang, G., Massarotto, P., Rudolph, V.: Optimization of pipeline transport for CO2 sequestration. Energ. Convers. Manage. 47(6), 702–715 (2006)
Jiang, X., Qu, D.R., Song, X.L., Liu, X.H., Zhang, Y.L.: Critical water content for corrosion of X65 mild steel in gaseous, liquid and supercritical CO2 stream. Int. J. Greenh. Gas. Con. 85, 11–22 (2019)
Xiang, Y., Wang, Z., Yang, X.X., Li, Z., Ni, W.D.: The upper limit of moisture content for supercritical CO2 pipeline transport. J. Supercrit. Fluids. 67, 14–21 (2012)
Xu, M., Zhang, Q., Yang, X., Wang, Z., Liu, J., Li, Z.: Impact of surface roughness and humidity on X70 steel corrosion in supercritical CO2 mixture with SO2, H2O, and O2. J. Supercrit. Fluids. 107, 286–297 (2016)
Witkowski, A., Rusin, A., Majkut, M., Rulik, S., Stolecka, K.: Comprehensive analysis of pipeline transportation systems for CO2 sequestration. Thermodynamics and Safety Problems 76, 665–673 (2013)
Mahgrefteh, H., Brown, S., Zhang, P.: A dynamic boundary ductile-fracture-propagation model for CO2 pipelines. Journal of Pipeline Engineering 9(4) (2010)
Spinelli, C.M., Demofonti, G., Di, B.M., Lucci, A.: CO2 full scale facilities challenges for EOR/CCTS testing on transportation issues. In: The Twenty-Second International Offshore and Polar Engineering Conference, Rhodes, Greece, ISOPE-I-12-323. OnePetro (2012)
Koornneef, J., Ramirez, A., Turkenburg, W., Faaij, A.: The environmental impact and risk assessment of CO2 capture, transport and storage–an evaluation of the knowledge base. Prog. Energ. Combust. 38(1), 62–86 (2012)
Veritas, D.N.: Design and operation of CO2 pipelines, Norway, Det Norske Veritas, 1–42 (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Lu, S., Zhang, L. (2023). Corrosion in CO2 Capture and Transportation. In: Zhang, L. (eds) Corrosion in CO2 Capture, Transportation, Geological Utilization and Storage. Engineering Materials. Springer, Singapore. https://doi.org/10.1007/978-981-99-2392-2_3
Download citation
DOI: https://doi.org/10.1007/978-981-99-2392-2_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-2391-5
Online ISBN: 978-981-99-2392-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)