Abstract
In this work, the segregation and homogenization organization of as-cast Ni–Co based superalloys with 4, 5 and 6% Nb contents are investigated, respectively. It’s found that the Nb element is the main cause of segregation in Ni–Co alloys, which is mainly attributed to the high melting point and slow solidification rate of Nb, resulting in the alloy being very susceptible to macroscopic segregation, and the content of Nb should be controlled within 5%. By means of high-temperature homogenization, which is heating at 1150 °C for 48 h, the dendritic structure can be completely eliminated and macroscopic segregation can be eliminated, but the high temperature leads to the formation of refractory compounds, such as NbC or TiN, and the amount of refractory compounds increases with the increase of Nb content. In addition, when the Nb content exceeds 5%, it leads to the formation of the Laves phase, which is detrimental to the thermoplasticity of the alloy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wang, Y., Dong, J., Zhang, M., Yao, Z.: Stress relaxation behavior and mechanism of AEREX350 and Waspaloy superalloys. Mater. Sci. Eng., A 678, 10–22 (2016)
Meetham, G.W.: High-temperature materials—a general review. J. Mater. Sci. 26(4), 853–860 (1991)
Xie, L., Sun, W., Wang, J., Chen, M., Wang, F.: Improving strength and oxidation resistance of a Ni-based ODS alloy via in-situ solid-state reaction. Corros. Sci. 197, 110078 (2022)
Zhu, L., Yu, X., Li, W., Zhang, L., Zhang, N., Lv, Y., Zhao, L., Zhang, W., Wang, Z., Yu, H., Bi, Z., Han, H., Ruan, J., Jiang, L.: High-throughput investigation of Nb and Ta alloying effects on the microstructure and properties of a novel Ni-Co-based superalloy. Scripta Mater. 226, 115215 (2023)
Hu, J., Zhou, B., He, X., Yu, H., Sun, G., Gao, J., Bi, Z., Du, Y., Zhang, S.: Influence of Nb content on phase precipitation behavior of new Ni-Co-based superalloys by selective laser melting. J. Market. Res. 24, 5713–5723 (2023)
Liang, Z., Paul, J.D., Stark, A., Bezold, A., Neumeier, S., Göken, M., Pyczak, F.: High-temperature CoNi-based superalloys strengthened by γ′-(Ni, Co)3 (Cr, Al, Ti, X): the effect of refractory elements. Metall. and Mater. Trans. A. 54(5), 1620–1634 (2023)
Costa, A.M.D.S., Oliveira, J.P., Salgado, M.V., Nunes, C.A., Lopes, E.S.N., Mogili, N.V.V., Tschiptschin, A.P.: Effect of Ta and Nb additions in arc-melted Co-Ni-based superalloys: microstructural and mechanical properties. Mater. Sci. Eng., A 730, 66–72 (2018)
Dong, J., Zhang, M., Xie, X., Thompson, R.G.: Interfacial segregation and cosegregation behaviour in a nickel-base alloy 718. Mater. Sci. Eng., A 328(1–2), 8–13 (2002)
Mantri, S.A., Dasari, S., Sharma, A., Alam, T., Pantawane, M.V., Pole, M., Sharma, S., Dahotre, N., Banerjee, R., Banerjee, S.: Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 718. Acta Mater. 210, 116844 (2021)
Miao, Z.J., Shan, A.D., Wu, Y.B., Jun, L.U., Xu, W.L., Song, H.: Quantitative analysis of homogenization treatment of INCONEL718 superalloy. Trans. Nonferrous Metals Soc. China 21(5), 1009–1017 (2011)
Hegde, S.R., Kearsey, R.M., Beddoes, J.C.: Designing homogenization–solution heat treatments for single crystal superalloys. Mater. Sci. Eng., A 527(21–22), 5528–5538 (2010)
Zhou, Z., Zhang, R., Cui, C., Zhou, Y., Sun, X.: Effects of homogenization treatment on the microsegregation of a Ni-Co based superalloy produced by directional solidification. Acta Metall. Sin. 34, 943–954 (2021)
Kusabiraki, K., Komatsu, H., Ikeuchi, S.: Lattice constants and compositions of the metastable Ni3Nb phase precipitated in a Ni-15Cr-8Fe-6Nb alloy. Metall. Mater. Trans. A. 29, 1169–1174 (1998)
Gong, X., Xu, W.W., Cui, C., Yu, Q., Wang, W., Gang, T., Chen, L.: Exploring alloying effect on phase stability and mechanical properties of γ″-Ni3Nb precipitates with first-principles calculations. Mater. Des. 196, 109174 (2020)
Ling, L.S.B., Yin, Z., Hu, Z., Liang, J.H., Wang, Z.Y., Wang, J., Sun, B.: Effects of the γ″-Ni3Nb phase on mechanical properties of Inconel 718 Superalloys with different heat treatments. Materials 13(1), 151 (2019)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Xie, L. et al. (2024). Effect of Nb Additions on the Microsegregation and Homogenization of Ni–Co Based Superalloys. In: Yue, X., Yuan, K. (eds) Proceedings of 2023 the 6th International Conference on Mechanical Engineering and Applied Composite Materials. MEACM 2023. Mechanisms and Machine Science, vol 156. Springer, Singapore. https://doi.org/10.1007/978-981-97-1678-4_16
Download citation
DOI: https://doi.org/10.1007/978-981-97-1678-4_16
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-97-1677-7
Online ISBN: 978-981-97-1678-4
eBook Packages: EngineeringEngineering (R0)