Abstract
Process tomography is a system that can be used to visualize the exact behavior of internal flow in any process. An optical tomography system can safely reconstruct images of the internal flow in non-intrusive and non-invasive sensor. The optical sensor used in the optical tomography system is the most critical part that determines the accuracy and reliability of the system. Therefore, a complementary metal oxide semiconductor (CMOS) area image sensor is used in the developed optical tomography system, in order to produce a high resolution image without disturbing the process flow. This paper describes the development of the driving circuitry system to test the performance of the monochrome CMOS area image sensor.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mariusz RR, Andrzej P (2003) Application of optical tomography for measurements of aeration parameters in large water tanks. Meas Sci Technol 14:199–204
Margi S, Hariyadi S (2010) A design of simple, portable optical tomography apparatus using 904 nm NIR laserdiode. Optik 121:1418–1422
Ruzairi AR, Chiam KT, MHF Rahiman (2008) An optical tomography system using a digital signal processor. Sensors 8:2082–2103
Idroas M (2004) A charge couple device based optical tomographic instrumentation system for particle sizing, Ph.D. Thesis
Tom P (2009) Hardware-based image processing for high-speed inspection of grains. Comput Electron Agric 69:12–18
Dickin FJ, Hoyle BS, Hunt A, Huang SM, llyas O, Lenn C, Waterfall RC, Williams RA, Xie CG, Beck MS (1992) Tomographic imaging of industrial process equipment: techniques and applications. In: IEE proceedings-G, vol 139, no I. pp 72–82
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Singapore
About this paper
Cite this paper
Mohd Najib, S., Idroas, M., Ibrahim, M.N. (2014). Driving Circuitry of Complementary Metal Oxide Semiconductor (CMOS) Area Image Sensor for Optical Tomography Instrumentation System. In: Mat Sakim, H., Mustaffa, M. (eds) The 8th International Conference on Robotic, Vision, Signal Processing & Power Applications. Lecture Notes in Electrical Engineering, vol 291. Springer, Singapore. https://doi.org/10.1007/978-981-4585-42-2_24
Download citation
DOI: https://doi.org/10.1007/978-981-4585-42-2_24
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-4585-41-5
Online ISBN: 978-981-4585-42-2
eBook Packages: EngineeringEngineering (R0)