Abstract
The high temperature superconducting magnetic levitation bearing (HTSMB) uses the special magnetic flux pinning properties of the high temperature superconductor and the full diamagnetic effect of the Meissner effect to make the rotor achieve self-stable suspension. Compared with electromagnetic bearings (AMB), superconducting magnetic suspension bearings do not require a control system and have lower energy losses. This paper analyzes the levitation characteristics of a new high-temperature superconducting magnetic levitation bearing using a frozen-image model. The results show that the levitation force and stiffness of the bearing change with the changes of the initial cooling gap, axial displacement and radial displacement of the bearing. Under the same conditions, the radial suspension force is an order of magnitude greater than the axial suspension force; Within a certain range, the smaller the initial cooling gap, the better the suspension performance of the bearing, and the hysteresis characteristics have little effect on the suspension characteristics of the bearing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tang, J., Zhang, Y., Fang, J.: Superconducting levitation styles for superconducting energy storage flywheel. In: International Conference on Mechatronics and Automation, Harbin, pp. 2889–2893 (2007)
Basaran, S., Sivrioglu, S.: Radial stiffness improvement of a flywheel system using multi–surface superconducting levitation. Supercond. Sci. Technol. 30(3), 035008 (2017)
Pesch, A.H., Smirnov, A., Pyrhönen, O., Sawicki, J.T.: Magnetic bearing spindle tool tracking through μ -synthesis robust control. IEEE/ASME Trans. Mechatron. 20(3), 1448–1457 (2015)
Hull, J.R.: Superconducting bearings. Supercond. Sci. Technol. 13(2), 1 (2000)
Ma, K.B., Postrekhin, Y.V., Chu, W.K.: Superconductor and magnet levitation devices. Rev. Sci. Instrum. 74(12), 4989–5017 (2003)
Nagaya, S., Komura, K., Kashima, N., Kawashima, H., Kakiuchi, Y., Minami, M.: Improvement and enlarging of the CFRP flywheel with superconducting magnetic bearings. Physica C 392, 769–772 (2003)
Floegel-Delor, U., Rothfeld, R., Wippich, D., Goebel, B., Riedel, T., Werfel, F.N.: Fabrication of HTS bearings with ton load performance. IEEE Trans. Appl. Supercond. 17(2), 2142–2145 (2007)
Wolsky, M.A.: An overview of flywheel energy systems with HTS bearings. Supercond. Sci. Technol. 15(5), 836–837 (2002)
Ma, K.B., Postrekhin, Y.V., Chu, W.K.: Superconductor and magnet levitation devices. Rev. Sci. Instr. 74(12), 4989–5017 (2003)
Werfel, F.N., Floegel-Delor, U., Rothfeld, R., et al.: Modelling and construction of a compact 500 kg HTS magnetic bearing. Supercond. Sci. Technol. 18(2), S19–S23 (2005)
Hull, J.R.: Effect of permanent-magnet irregularities in levitation force measurements. Supercond. Sci. Technol. 13(6), 854–856 (2000)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wang, Sy., Wu, N., Yang, D., Zhu, Ys. (2020). Analysis of Suspension Characteristics of a New High-Temperature Superconducting Magnetic Levitation Bearing Based on Frozen-Image Model. In: Fei, M., Li, K., Yang, Z., Niu, Q., Li, X. (eds) Recent Featured Applications of Artificial Intelligence Methods. LSMS 2020 and ICSEE 2020 Workshops. LSMS ICSEE 2020 2020. Communications in Computer and Information Science, vol 1303. Springer, Singapore. https://doi.org/10.1007/978-981-33-6378-6_17
Download citation
DOI: https://doi.org/10.1007/978-981-33-6378-6_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-6377-9
Online ISBN: 978-981-33-6378-6
eBook Packages: Computer ScienceComputer Science (R0)