Abstract
Because the workpiece is affected by machining force, inertia force, gravity and other external forces in the machining process, some clamps are used to exert clamping forces to press the workpiece against locators.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chetaev NG. Theoretical mechanics [M]. Moscow, 1989.
Choudhuri SA, DeMeter EC. Tolerance analysis of machining fixture locators [J]. Trans ASME J Manuf Sci Eng. 1999;121:272–81.
Chou YC, Chandru V, Barash MM. A mathematical approach to automatic configuration of machining fixtures: analysis and synthesis [J]. Trans ASME J Eng Ind. 1989;111(11):299–306.
DeMeter EC, Xie W, Choudhuri S, Vallapuzha S, Trethewey MW. A model to predict minimum required clamp pre-loads in light of fixture-workpiece compliance [J]. Int J Mach Tools Manuf. 2001;41:1031–54.
Gou WX. Mechanics of materials [M]. Northwestern Polytechnical University Press, 2000. (in Chinese).
Gui XW, Fuh JYH, Nee AYC. Modeling of frictional elastic fixture-workpiece system for improving location accuracy [J]. IIE Trans. 1996;28:821–7.
Hong M, Payandeh S, Gruver WA. Modeling and analysis of flexible fixturing systems for agile manufacturing [J]. In: IEEE International Conference on Systems, Man, and Cybernetics, 1996, Vol. 2, pp. 1231–1236.
Johnson KL. Contact mechanics [M]. Cambridge University Press, 1985.
Kang YZ. Computer Aided Fixture Design Verification [D]. Ph.D. Thesis, Worcester Polytechnic Institute, 2001.
Kashyap S, DeVries WR. Finite element analysis and optimization in fixture design [J]. Struc Optim. 1999;18:193–201.
Lee JD, Haynes LS. Finite element analysis of flexible fixturing system [J]. Trans ASME J Manuf Sci Eng. 1987;109(134):9.
Li B, Melkote SN. Fixture clamping force optimization and its impact on workpiece location accuracy [J]. Int J Adv Manuf Technol. 2001;17(104):13.
Menassa RJ, DeVries WR. Opimization methods applied to selecting support positions in fixture design [J]. Trans ASME J Eng Ind. 1991;113:412–8.
Pilkey WD, Wunderlich W. Mechanics of structures: variational and computational methods [M]. CRC Press, 1994.
Qin GH, Zhang WH, Wu ZX, Wan M. Systematic modeling of workpiece-fixture geometric default and compliance for the prediction of workpiece machining error [J]. Trans ASME J Manuf Sci Eng. 2007;129(4):789–801.
Raghu A, Ferreira PM. Analysis of the influence of fixture locator errors on the compliance of work part features to geometric tolerance specifications [J]. Trans ASME J Manuf Sci Eng. 2003;125:609–6161.
Raghu A, Melkote SN. Modeling of workpiece location error due to fixture geometric error and fixture-workpiece compliance [J]. Trans ASME J Manuf Sci Eng. 2005;127:75–83.
Rong Y, Bai Y. Machining accuracy analysis for computer aided fixture design [J]. J Manuf Sci Eng. 1996;118:289–300.
Rong Y, Hu W, Kang Y, Yen DW. Locating error analysis and tolerance assignment for computer-aided fixture design [J]. Int J Prod Res. 2001;39(15):3529–45.
Tan EYT, Kumar AS, Fuh JYH, Nee AYC. Modeling, analysis, and verification of optimal fixturing design [J]. IEEE Trans Autom Sci Eng. 2004;1:121–32.
Tao ZJ, Kumar AS, Nee AYC, Mannan MA. Modeling and experimental investigation of a sensor-integrated workpiece-fixture system [J]. Int J Comput Appl Technol. 1997;10:236–50.
Trappey AJC, Liu CR. An automatic workholding verification system [J]. Robot Comput Integ Manuf. 1992;9(4.5):321–6.
Wang MY. Tolerance analysis for fixture layout design [J]. Assem Autom. 2002;22:153–62.
Xiong CH, Wang MY, Tang Y, Xiong YL. On prediction of passive contact forces of workpiece-fixture systems [J]. Proc Ins Mechan Eng Part B-J Eng Manuf. 2005;219(B3):309–24.
Xiong CH, Ding H, Xiong YL. Fundamentals of Robotic Grasping and Fixturing [M]. World Scientific, 2007.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2021 Shanghai Jiao Tong University Press
About this chapter
Cite this chapter
Qin, G. (2021). Analysis of Clamping Reasonability. In: Advanced Fixture Design Method and Its Application. Springer, Singapore. https://doi.org/10.1007/978-981-33-4493-8_4
Download citation
DOI: https://doi.org/10.1007/978-981-33-4493-8_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-4492-1
Online ISBN: 978-981-33-4493-8
eBook Packages: EngineeringEngineering (R0)