Abstract
The lifting tool has been developed as per the BS EN13155-lifting accessories, non-fixed load lifting attachments, so as per these standards, counterbalance c-crane will develop and also customize mounting arrangement to be used for lifting the wind turbine components during the integration of the wind turbine. So these tools will be using in the production plant of the wind turbine components. Depending upon the depth of assembly, the fork arm length will decide. The lifting tool or attachment design will depend upon the fork arm geometry. Mounting tools are assembled with different parts, so these parts are connected by different joint connections like fasteners, welded joints, etc. The joints design will be followed by DIN EN 1993.1.8.2005-1, as per these standard instructions, joints to be designed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
The following journals and datasheets are referred during the design and development of the pitch box-mounting tool.
References
The following journals and datasheets are referred during the design and development of the pitch box-mounting tool.
P. Ravikanth Raju et al., Design and analysis of crane hook. Int. J. Curr. Eng. Sci. Res. (IJCESR) 5(4) (2018). ISSN (PRINT): 2393-8374. (ONLINE): 2394-0697
P.N. Godage et al., Static structural analysis of engine lifting bracket. Int. J. Res. Appl. Sci. Eng. Technol. 6(VI) (2018). ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 6.887
N. Khan et al., Design and stress analysis of Ramshorn hook with different cross section using CAE tools, in 2nd International Conference on Engineering Technology, Science and Management Innovation (ICETSMI-2017), 15 Jan 2017. ISBN: 978-81-932712-3-0
R. Tarale et al., Structural and modal analysis of crane hook with different material using FEA. Int. Res. J. Eng. Technol. 04(06) (2017). e-ISSN: 2395-0056
A.R. Contractor et al., Design and analysis of ladder frame chassis considering support at contact region of leaf spring and chassis frame. IOSR J. Mech. Civ. Eng. (IOSR-JMCE) 12(2) (2015) (Ver. IV). e-ISSN: 2278-1684, p-ISSN: 2320-334X
M.N.V. Krishnaveni et al., Static analysis of crane hook with I-section using ANSYS. Int. J. Eng. Manag. Res. 5(3) (2015). ISSN (ONLINE): 2250-0758, ISSN (PRINT): 2394-6962
2006/42/EC-Machinery Directive
EN 1993-1-1-Euro code 3: design of steel structures—part 1–1: general rules and rules for buildings
EN 1993-1-8-Euro code 3: design of steel structures—part 1–8: design of joints
IEC 61400-Turbine Safety Standards
EN ISO 14122-2-Safety of machinery—permanent means of access to machinery
EN13155-Cranes—safety—non-fixed load lifting attachments
RUD Product Catalogue from website link. https://www.rud.com/en/products/sling-lashing-systems/sling-systems/lifting-points/detail/vrs-starpoint-metric-thread.html
Spring Latches Details from website link. https://www.elesa-ganter.com/en/www/Indexing-elements--Spring-latches--GN416
C-cranes details from website link. https://www.cranes-uk.com/p/tkg-vh-manual-balance-crane-forks
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Prakasha, K.S., Kakkeri, S., Amaresh Kumar, D. (2021). Design of Pitch Box-Mounting Tool. In: Reddy, A., Marla, D., Favorskaya, M.N., Satapathy, S.C. (eds) Intelligent Manufacturing and Energy Sustainability. Smart Innovation, Systems and Technologies, vol 213. Springer, Singapore. https://doi.org/10.1007/978-981-33-4443-3_72
Download citation
DOI: https://doi.org/10.1007/978-981-33-4443-3_72
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-4442-6
Online ISBN: 978-981-33-4443-3
eBook Packages: EngineeringEngineering (R0)