Abstract
This research aims to investigate the main operational challenges of sensitive products (e.g., food, drugs) and propose a framework for the enhancement of the quality and efficiency of the respective logistics process. Four semi-structured interviews were conducted with senior executives of a Cypriot company, which specializes in the provision of Warehousing and Distribution logistics services, in order to obtain insight regarding the company’s processes, monitoring systems and difficulties. Based on the interview findings and the literature’s suggestions, an IoT platform is introduced with the aim to achieve real-time monitoring of the products’ and vehicle’s temperature and humidity as well as other transportation parameters, including the vehicle’s position. The platform provides real-time, easily accessible information making use of appropriate technologies and applications, such as the Radio Frequency Identification (RFID) tags, Wireless Sensor Network (WSN) and cloud computing. The proposed platform is beneficial for companies involved in cold-chain logistics (CCL), and it leads to operations typified by much higher efficiency levels while increasing the satisfaction level of the end consumers.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tsang, Y.P., Choy, K.L., Wu, C.H., Ho, G.T.S., Lam, H.Y., Koo, P.S.: An IoT-based cargo monitoring system for enhancing operational effectiveness under a cold chain environment. Int. J. Eng. Bus. Manag. 9, 1847979017749063 (2017)
Rodrigue, J. and Notteboom, T.: The Geography of Transport Systems. Routledge (2016). Available at: https://transportgeography.org/?page_id=6585. Accessed 7 June 2019
Bruckner, S., Albrecht, A., Petersen, B., Kreyenschmidt, J.: Influence of cold chain interruptions on the shelf life of fresh pork and poultry. Int. J. Food Sci. Technol. 47(8), 1639–1646 (2012)
Jedermann, R., Nicometo, M., Uysal, I., Lang, W.: Reducing food losses by intelligent food logistics. Philos. Trans. A Math. Phys. Eng. Sci. 372, 20130302 (2014)
Raab, V., Bruckner, S., Beierle, E., Kampmann, Y., Petersen, B., Kreyenschmidt, J.: Generic model for the prediction of remaining shelf life in support of cold chain management in pork and poultry supply chains. J. Chain Netw. Sci. 8(1), 59–73 (2008)
Aung, M.M., Chang, Y.S.: Temperature management for the quality assurance of a perishable food supply chain. Food Control 40, 198–207 (2014)
Arduino, G., Carrillo Murillo, D., Parola, F.: Refrigerated container versus bulk: evidence from the banana cold chain. Maritime Policy Manag. 42(3), 228–245 (2015)
Bharti, M.A.: Examining market challenges pertaining to cold chain in the frozen food industry in Indian retail sector. J. Manag. Sci. Technol. 2(1), 33–40 (2014)
Faisal, M.N.: Prioritising agility variables for cold supply chains. Int. J. Logist. Syst. Manag. 10(3), 253–274 (2011)
Montanari, R.: Cold chain tracking: a managerial perspective. Trends Food Sci. Technol. 19(8), 425–431(2008)
Kuo, J.C., Chen, M.C.: Developing an advanced multi-temperature joint distribution system for the food cold chain. Food Control 21(4), 559–566 (2010)
Salin, V., Nayga, R.M., Jr.: A cold chain network for food exports to developing countries. Int. J. Phys. Distrib. Logist. Manag. 33(10), 918–933 (2003)
Mattoli, V., Mazzolai, B., Mondini, A., Zampolli, S., Dario, P.: Flexible tag datalogger for food logistics. Procedia Chem. 1(1), 1215–1218 (2009)
Ruiz-Garcia, L., Barreiro, P., Robla, J.I.: Performance of ZigBee-based wireless sensor nodes for real-time monitoring of fruit logistics. J. Food Eng. 87(3), 405–415 (2008)
Ruiz-Garcia, L., Barreiro, P., Robla, J.I., Lunadei, L.: Testing ZigBee motes for monitoring refrigerated vegetable transportation under real conditions. Sensors 10(5), 4968–4982 (2010)
Trebar, M., Lotrič, M., Fonda, I., Pleteršek, A., Kovačič, K.: RFID data loggers in fish supply chain traceability. Int. J. Antennas Propag. (Article ID 875973), 9 (2013)
Chandra, A.A., Lee, S.R.: A method of WSN and sensor cloud system to monitor cold chain logistics as part of the IoT technology. Int. J. Multim. Ubiquit. Eng. 9(10), 145–152 (2014)
Kosmatos, E.A., Tselikas, N.D., Boucouvalas, A.C.: Integrating RFIDs and smart objects into a Unified Internet of Things architecture. Adv. Internet Things 1(01), 5–12 (2011)
Yin, R.: Qualitative Research from Start to Finish. The Guilford Press, New York, NY (2016)
Taylor, S.J., Bogdan, R., DeVault, M.L.: Introduction to Qualitative Research Methods: A Guidebook and Resource. Wiley, NJ (2016)
Baxter, P., Jack, S.: Qualitative case study methodology: study design and implementation for novice researchers. Qualit. Rep. 13(4), 544–559 (2008)
Saunders, M., Lewis, P., Thornhill, A.: Research Methods for Business Students, 5th edn. Pearson, Harlow (2012)
Tracy, S.J.: Qualitative Research Methods: Collecting Evidence, Collecting Evidance, Crafting Analysis, Communicating Impact. Willey-Blackwell, UK (2013)
Creswell, J.W., Poth, C.N.: Qualitative inquiry and research design: Choosing among five approaches. Sage publications (2017).
Rubin, H.J., Rubin, I.S.: Qualitative Interviewing: The Art of Hearing Data. Sage.
Lu, S., Wang, X.: Toward an intelligent solution for perishable food cold chain management. In: 2016 7th IEEE International Conference on Software Engineering and Service Science (ICSESS), pp. 852–856 (2016)
Liu, T., Liu, J., Liu, B.: Design of intelligent warehouse measure and control system based on Zigbee WSN. In: 2010 IEEE International Conference on Mechatronics and Automation, pp. 888–893. IEEE (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Marinelli, M., Janardhanan, M., Koumi, N. (2021). An Explorative Analysis of IoT Applications in Cold Chain Logistics. In: Phanden, R.K., Mathiyazhagan, K., Kumar, R., Paulo Davim, J. (eds) Advances in Industrial and Production Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-33-4320-7_1
Download citation
DOI: https://doi.org/10.1007/978-981-33-4320-7_1
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-4319-1
Online ISBN: 978-981-33-4320-7
eBook Packages: EngineeringEngineering (R0)