Abstract
The wear characteristic of NiTi–W composite layer developed on Ti–6Al–4V alloy by using TIG cladding route was evaluated. The NiTi–W composite coating fabricated with preplaced Ni–Ti–W powder with 9:9:2 weight ratio and at 60 A current and 2.3 mm/s scan speed has been tested against an abrasive disk and hardened steel (HRC 58) under different normal load and sliding velocity conditions to analyze its sliding abrasive wear and adhesive wear behaviors. The effect of test conditions on the wear characteristic of the NiTi–W clad layer was analyzed in-depth and compared with the wear characteristic of the uncoated Ti–6Al–4V alloy. It was found that the NiTi–W composite coating shows up to eleven times better wear resistance than the uncoated Ti–6Al–4V alloy under abrasive wear test conditions and more than seven times under sliding adhesive test condition.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Molinria, A., Straffelinia, G., Tesia, B.: Dry sliding wear mechanisms of the Ti-6Al-4V alloy. Wear 208, 105–112 (1997)
Banerjee, D., Williams, J.C.: Perspectives on titanium science and technology. Acta Mater. 61, 844–879 (2013)
Waghmare, D.T., Padhee, C.K., Prasad, R., Masanta, M.: NiTi coating on Ti-6Al-4V alloy by TIG cladding process for improvement of wear resistance: microstructure evolution and mechanical performances. J. Mater. Process. Technol. 262, 551–561 (2018)
Kustas, F.M., Misra, M.S.: ASM Handbook: Friction and Wear of Titanium Alloys. ASM International (1991)
Galvan, D., Ocelík, V., Pei, Y., Kooi, B.J., De Hosson, J.T.M., Ramous, E.: Microstructure and properties of TiB/Ti-6Al-4V coatings produced with laser treatments. J. Mater. Eng. Perform. 13, 406–412 (2004)
Lin, Y.H., Lei, Y.P., Li, X.Q., Zhi, X.H., Fu, H.G.: A study of TiB2/TiB gradient coating by laser cladding on titanium alloy. Opt. Lasers Eng. 82, 48–55 (2016)
Buytoz, S., Ulutan, M.: In situ synthesis of SiC reinforced MMC surface on AISI 304 stainless steel by TIG surface alloying. Surf. Coat. Technol. 200, 3698–3704 (2006)
Saroj, S., Sahoo, C.K., Masanta, M.: Microstructure and mechanical performance of TiC-Inconel825 composite coating deposited on AISI 304 steel by TIG cladding process. J. Mater. Process. Technol. 249, 490–501 (2017)
Gao, F., Wang, H.M.: Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy. Intermetallics 16, 202–208 (2008)
Sahoo, C.K., Masanta, M.: Microstructure and mechanical properties of TiC-Ni coating on AISI304 steel produced by TIG cladding process. J. Mater. Process. Technol. 240, 126–137 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Garbyal, J.S., Padhee, C.K., Raheem, A., Masanta, M. (2019). Sliding Abrasive and Adhesive Wear Behavior of TIG-Cladded NiTi–W Coating Deposited on Ti–6Al–4V Alloy. In: Shunmugam, M., Kanthababu, M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9425-7_54
Download citation
DOI: https://doi.org/10.1007/978-981-32-9425-7_54
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9424-0
Online ISBN: 978-981-32-9425-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)