Abstract
Electric discharge machining (EDM) is an advanced machining process, which harnesses the energy of series of electrical sparks for material removal from the workpiece. EDM is not only limited to machining of mechanical components but also finds its applications in aerospace, biomedical and other fields. Owing to the miniaturization of components, the fabrication at micro level paved the way for the development of micro-EDM (µ-EDM) process. In this study, the principle of µ-EDM has been used for machining open micro-channels for the efficient mixing of different fluids using micro-fluidic system. Micro-fluidic channels are fabricated using a stainless steel tool and the effect of peak current, pulse-on time and spark time has been investigated. Channel width, channel depth and its surface roughness are the response parameters. Input parameters are identified for minimum surface roughness of micro-fluidic channels to provide efficient mixing while achieving desired mixing time and homogeneity.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mao, X., Huang, T.J.: Microfluidic diagnostics for the developing world. R. Soc. Chem. 12, 1412–1416 (2012)
Kovarik, M.L., Ornoff, D.M., Melvin, A.T., Dobes, N.C., Wang, Y., Dickinson, P.C., Shah, P.K., Albritton, N.L.: Micro total analysis systems: fundamental advances and applications in the laboratory, clinic, and field. Anal. Chem. 85(2), 451–472 (2013)
Graber, N., Manz, A., Widmer, H.M.: Miniaturized total chemical analysis system: a novel concept for chemical sensing. Sens. Actuators B: Chem. 1, 244–248 (1990)
Arora, A., Simone, G., Georgette, B., Beugelaar, S., Kim, J.T., Manz, A.: Latest development in micro total analysis system. Anal. Chem. 82, 4830–4847 (2010)
Balagadde, F.K., You, L.C., Hansen, C.L., Arnold, F.H., Quake, S.R.: Long-term monitoring of bacteria undergoing programmed population control in a micro chemo stat. Science 309, 137–140 (2005)
Lee, C.C., Sui, G, Elizarov, A., Shu, C.J., Shin, Y.S., Dooley, A.N., Huang, J., Daridon, A., Wyatt, P., Stout, D., et al.: Multistep synthesis of a Radio labelled imaging probe using integrated micro fluidics. Science 310, 1793–1796 (2005)
Bhattacharyya, B., Munda, J., Malapati, M.: Advancement in electrochemical micro-machining. Int. J. Mach. Tools Manuf. 44, 1577–1589 (2004)
Schuster, R., Kirchner, V., Allongue, P., Ertl, G.: Electrochemical machining. Science 289, 98–101 (2000)
Bhattacharya, B., Jain, V.K.: Introduction to Micromachining. Narosa Publication, pp. 17.1–17.32 (2009)
Jain, V.K., Lal, G.K., Kanetkar, Y.: Stray current attack and stagnation zones in electrochemical drilling. Int. J. Adv. Manuf. Technol. 26, 527–536 (2005)
Gunther, A., Jhunjhunwala, M., Thalmann, M., Schmidt, M.A., Jensen, K.F.: Micro mixing of miscible liquids in segmented gas-liquid flow. Langmuir 21, 1547–1555 (2005)
Hong, W.J., Quake, S.R.: Integrated nanoliter system. Nat. Biotechnol. 21, 1179–1183 (2003)
Weibel, D.B., Kruithof, M., Potenta, S., Sia, S.K., Lee, A., Whitesides, G.M.: Torque actuated valves for microfluidics. Anal. Chem. 77, 4726–4733 (2005)
Nguyen, N.T., Wu, Z.: Micromixers—a review. J. Micromech. Microeng. 15, R1–R16 (2005)
Garstecki, P., Fischbach, M.A., Whitesides, G.M.: Design for mixing using bubbles in branched microfluidic channels. Appl. Phys. Lett. 86 (2005)
Gajrani, K.K., Sankar, M.M.: State of the art on micro to nano textured cutting tools. Mater. Today: Proc. 4(2A), 3776–3785 (2017)
Behera, R.R., Babu, P.M., Gajrani, K.K., Sankar, M.R.: Fabrication of micro-channels on 304 stainless steel (SS-304) using Nd:YAG laser beam micro-machining. Int. J. Addit. Subtractive Mater. Manuf. 1(3/4), 338–359 (2017)
Gajrani, K.K., Suresh, S., Sankar, M.R.: Environmental friendly hard machining performance of uncoated and MoS2 coated mechanical micro-textured tungsten carbide cutting tools. Tribol. Int. 125, 141–155 (2018)
Gajrani, K.K., Reddy, R.P.K., Sankar, M.R.: Tribo-mechanical, surface morphological comparison of un-textured, mechanical micro-textured (MµT) and coated-MµT cutting tools during machining. Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. (2018). https://doi.org/10.1177/1350650118764975
Gajrani, K.K., Sankar, M.R., Dixit, U.S.: Environmentally friendly machining with MOS2 filled mechanically micro-textured cutting tools. J. Mech. Sci. Technol. 32(8), 3797–3805 (2018)
Gajrani, K.K., Sankar, M.R.: Sustainable machining with self-lubricating coated mechanical micro-textured cutting tools. In: Reference Module in Materials Science and Materials Engineering. Elsevier. https://doi.org/10.1016/b978-0-12-803581-8.11325-6
Reynaerts, D., Meeusen, W., Brussel, H.V.: Machining of three-dimensional microstructures in silicon by electro-discharge machining. Sens. Actuators 67, 159–165 (1998)
Zeid, O.A.A.: On the effect of electro discharge machining parameters on the fatigue life of AISI d6 tool steel. Curr. Adv. Mech. Des. Prod. VI 68, 27–32 (1997)
Mohri, M., Suzuki, M., Furuya, M., Saito, N., Kobayashi, A.: Electrode wear process in electrical discharge machining. CIRP Ann. 165–168 (1995)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Sankar, M.R. et al. (2019). Fabrication and Experimental Investigation of Micro-fluidic Channel-Based Mixing System Using Micro-electric Discharge Machining. In: Shunmugam, M., Kanthababu, M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9425-7_1
Download citation
DOI: https://doi.org/10.1007/978-981-32-9425-7_1
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9424-0
Online ISBN: 978-981-32-9425-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)