Abstract
Flexible bronchoscope or fiber optic bronchoscope (FOB) is commonly used for airway observation in lung diagnosis because of its easy, safe, and good tolerant technique. However, during intubation, FOB may lead to get jammed due to unpassed size. A novel soft-tip FOB development using soft actuator mechanism is proposed to solve the jamming problem. The study is focused on the design, fabrication, and implementation stages. The FOB design utilized a molding system that was drawn using SolidWorks and printed using 3D printer. The FOB fabrication used the printed mold to create the soft-tip by mixing the silicone rubber with its curing agent, pouring the mixture into the mold and solidifying them into the mold. The FOB initial implementation was performed by using tube and air compressor. Fabricating two types of soft actuator twisting and bending actuator developed a flexible bronchoscope using soft actuator. The result shows that the proposed soft-tip could move close to movement requirement after standard pressure driving experiment was executed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Jackson C (1958) MD., SCD. Dissertation, LL. D. Bronchoesophagology. In: Bronchoesophagology, Philadelphia and London, pp 5–34
Cosal ID, Ali I (1987) Penggunaan bronkoskopi serat optik dalam diagnosis dan pengobatan kelainan trakeobronkial. Dalam: Loka Karya Endoskopi, Ujung Pandang pp 30–60
Patient Simulators, Imaging Phantoms for Skill Training. (n.d.). https://www.kyotokagaku.com/corporation/index.html. Accessed 31 Dec 2014
Ernst A (ed) (2009) Introduction to bronchoscopy. 1st ed. Cambridge University Press, Cambridge. Cambridge Books Online. Web. 12 Nov 2014
Hagberg CA (2012) Benumof and Hagberg’s airway management. Elsevier Health Sciences, Philadelphia, pp 403–404
Kristensen MS (2003) The parker flex-tip tube versus a standard tube for fiberopticorotracheal intubation: a randomized double-blind study. Anesthesiology 98:354–358
Suzumori K, Endo S, Kanda T, Kato N, Suzuki H (2007) A bending pneumatic rubber actuator realizing soft-bodied manta swimming robot. In: IEEE international conference on robotics and automation
Suzumori K et al (1997) Fiberless flexible microactuator designed by finite-element method. Proc IEEE/ASME Trans Mechatron 2(4):281–286
Udupa G, Sreedharan P, Sai Dinesh P, Kim D (2014) Asymmetric bellow flexible pneumatic actuator for miniature robotic soft gripper. J Robot
Wakimoto S, Ogura K, Suzumori K, Nishioka Y (2009) Miniature soft hand with curling rubber pneumatic actuators. In: Proceedings of IEEE international conference on robotics and automation, Japan, pp 556–561
Ogura K, Wakimoto S, Suzumori K, Nishioka Y (2008) Micro pneumatic curling actuator-nematode actuator. In: IEEE international conference on robotics and biomimetics, ROBIO, pp 462–467
Suzumori K et al (2007) A bending pneumatic rubber actuator realizing soft-bodied manta swimming robot. In: IEEE international conference on robotics and automation
Wakimoto S, Kumagai I, Suzumori K (2009) Development of large intestine endoscope changing its Stiffness. In: IEEE international conference on robotics and biomimetics (ROBIO)
Xiameter(r) Safety Data Sheet According to article 31 and Annex II of the EU REACH Regulation Version: 2.0 Revision Date: 09.11.2011 Superseded date: 12.11.2007
Faudzi AAM et al (2012) Development of bending soft actuator with different braided angles. In: IEEE/ASME international conference on advanced intelligent mechatronics (AIM)
Iwata K, Suzumori K, Wakimoto S (2011) Development of contraction and extension artificial muscles with different braid angles and their application to stiffness changeable bending rubber mechanism by their combination. J Robot Mechatron 2(34):582
Suzumori K, Iikura S, Tanaka H (1991) Development of flexible microactuator and its applications to robotic mechanisms. In: Proceedings. IEEE international conference on robotics and automation, pp 1622–1627
Suzumori K, Hama T, Kanda T (2006) New pneumatic rubber actuators to assist colonoscope insertion. In: ICRA 2006. Proceedings of IEEE international conference on robotics and automation
Bolliger CT, Mathur PN (eds) (2000) Interventional bronchoscopy, vol 30. Karger Medical and Scientific Publishers, Basel
Double Nozzle 3D Printer. (n.d.) http://store.mrj.my/3d-printer/46-double-nozzle-3d-printer.html. Accessed 29 Dec 2014
Acknowledgments
The authors would like to acknowledge Universiti Teknologi Malaysia (UTM) under UTM-RU Grant No. R.J130000.7909.4S091 and Ministry of Science, Technology and Innovation (MOSTI) Malaysia.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
M. Faudzi, A.‘., Surakusumah, R.F., Octorina Dewi, D.E., Mohd. Nordin, I.N.A., Muhammad Razif, M.R. (2015). Development of Flexible Bronchoscope Device Using Soft Actuator. In: Lai, K., Octorina Dewi, D. (eds) Medical Imaging Technology. Lecture Notes in Bioengineering. Springer, Singapore. https://doi.org/10.1007/978-981-287-540-2_11
Download citation
DOI: https://doi.org/10.1007/978-981-287-540-2_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-287-539-6
Online ISBN: 978-981-287-540-2
eBook Packages: EngineeringEngineering (R0)